User manual KONICA MINOLTA BIZHUB PRO C6500P - annexe 1

Contents -Machine Information & Printing Operation1 Introduction/ Safety Information 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Energy Saver ..................................................................................... 1-5 LICENSE ............................................................................................ 1-6 Available Features .......................................................................... 1-29 Safety Information .......................................................................... 1-32 Regulation Notices ......................................................................... 1-41 Caution Notations and Labels ....................................................... 1-45 Space Requirements ...................................................................... 1-49 Operation Precautions ................................................................... 1-58 2 Preparation for Use 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Machine Configuration ..................................................................... 2-3 Turning On/Off the Power .............................................................. 2-33 Automatically Returning to the Default Settings: Auto Reset .... 2-37 To Use Machine When Power Save LED Lights .......................... 2-38 Displaying Screen for Operation Guide: Help Mode ................... 2-44 Adjusting Response Time of Touch Keys: Accessibility ............. 2-45 Controlling Printer from Browser: Remote Panel ........................ 2-46 3 Paper Information 3.1 3.2 3.2.1 3.2.2 Paper Information ............................................................................. 3-3 Paper Setting .................................................................................. 3-17 Using Paper Not Specified to Any Tray: Paper Setting ............... 3-18 Improving Unevenness on Large-Sized Paper or Feedability of SmallSized Thick Paper in Duplex Printing ........................................... 3-30 4 Printing Operation 4.1 4.2 4.3 4.4 Machine Status Screen .................................................................... 4-3 To Stop Printing ................................................................................ 4-5 Overview of Job List Screen ............................................................ 4-6 Job Operation on Job List Screen .................................................. 4-7 bizhub PRO C6500P Contents-1 4.4.1 4.4.2 4.4.3 4.4.4 To Check/Control Reserved Jobs ..................................................4-7 To Display Output History ...............................................................4-9 To Check Incomplete Jobs ...........................................................4-10 To Check/Operate Suspended Jobs ............................................4-11 5 Output Applications 5.1 5.2 5.2.1 5.3 5.3.1 5.3.2 5.4 5.5 5.6 5.6.1 5.6.2 5.6.3 5.7 5.8 5.9 Sorting/ Stapling Printed Sheets (Finisher FS-503/520/607) .........5-3 Output Modes Using Folding Unit FD-501 ......................................5-5 Attaching Cover Sheet (Post Inserter on FD-501) ..........................5-5 Output Modes Using Saddle Stitcher SD-501 .................................5-8 Making Folded Booklet ...................................................................5-8 Folding Sheets ................................................................................5-9 Using Folder/Finisher Functions Manually ....................................5-10 Using Perfect Binder PB-501 ..........................................................5-13 Using Finisher FS-607 .....................................................................5-20 Making Folded Booklet (Multi Half Fold / Fold&Staple) ................5-20 Folding Sheets in Three (Multi Tri-Fold) ........................................5-21 Punching File Holes in Sheets (Punch) .........................................5-22 Cover Sheet Feeding (Paper Inserter) ...........................................5-23 Using Finisher FS-520/FS-607 Manually ........................................5-25 Loading/Sorting a Volume of Sheets (Large Capacity Stacker LS501) ....................................................................................................5-28 6 Supplies & Handling 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 Loading Paper ....................................................................................6-3 Loading Cover Paper ......................................................................6-20 Loading Tabbed Sheets ..................................................................6-22 Adding Toner ...................................................................................6-26 Exchanging Toner Recovery Box ...................................................6-30 Replenishing Staples .......................................................................6-32 Adding Paste Pellet to Perfect Binder PB-501 ..............................6-43 Disposing Punch Waste ..................................................................6-46 Disposing Trimmings ......................................................................6-51 Removing Finished Sets from Large Capacity Stacker LS-501 ..6-55 Contents-2 bizhub PRO C6500P 7 Maintenance 7.1 7.2 7.3 7.4 7.5 7.6 Cleaning the Machine ....................................................................... 7-3 Checking Print Count ....................................................................... 7-4 Cleaning Conveyance Belt of Saddle Stitcher Tray ....................... 7-7 If "Trim Receiver Exchange" Message Is Displayed ................... 7-10 Preventive Maintenance ................................................................. 7-11 Precautions for Paste Pellets and the Perfect Binder ................. 7-12 8 Troubleshooting 8.1 8.2 8.3 8.4 8.5 8.6 8.7 If "Please Call Service C-####" Message Is Displayed ................. 8-3 If Paste Pellets Stick Inside Paste Hopper ..................................... 8-5 Clearing Mishandled Paper ............................................................. 8-7 If [MACHINE] Tab Blinks in Orange .............................................. 8-10 If "Memory Full" Message Is Displayed: Memory Overflow ....... 8-13 If Power OFF/ON Screen Is Displayed .......................................... 8-14 Troubleshooting Tips ..................................................................... 8-15 9 Specifications 9.1 9.2 Main Body Specifications ................................................................ 9-3 Option Specifications ....................................................................... 9-5 10 Index bizhub PRO C6500P Contents-3 Contents -POD Administrator's Reference1 Introduction 1.1 1.2 Machine Status Screen Setting Outlines .........................................1-3 Utility Screen Setting Outlines .........................................................1-6 2 Paper Setting 2.1 2.1.1 2.1.2 2.2 2.3 Paper Setting Outlines ......................................................................2-3 Setting Items in Paper Setting ........................................................2-3 Paper Type Specifications ..............................................................2-5 Register Paper Type/Weight ............................................................2-8 Delete Paper Setting .......................................................................2-16 3 Adjustment 3.1 3.1.1 3.1.2 3.1.3 3.1.4 3.2 3.3 3.3.1 3.3.2 3.3.3 3.4 3.4.1 3.4.2 3.4.3 3.4.4 3.4.5 3.4.6 3.4.7 3.4.8 01 Machine Adjustment ....................................................................3-3 01 Printer Adjustment \ 01 Restart Timing Adjustment ..................3-3 01 Printer Adjustment \ 02 Centering Adjustment ..........................3-6 01 Printer Adjustment \ 03 FD-Mag. Adjustment ...........................3-8 01 Printer Adjustment \ 04 CD-Mag. Adjustment .........................3-11 02 Execute Adjust Operation ..........................................................3-13 03 Finisher Adjustment (FS-503) ....................................................3-14 01 Stapler Position Adj. \ 01 Staple Center Position ....................3-14 01 Stapler Position Adj. \ 02 Paper Width (Staple) .......................3-17 01 Stapler Position Adj. \ 03 Paper Width (Straight) .....................3-20 03 Finisher Adjustment (FD-501) ....................................................3-23 02 Multi Folder (Punch) Adj. \ 01 Paper Width Adjustment ..........3-23 02 Multi Folder (Punch) Adj. \ 02 Hole-Punch Vertical Pos. .........3-25 03 Multi Folder (Fold) Adj. \ 01 Half Fold Position Adj. .................3-28 03 Multi Folder (Fold) Adj. \ 02 Tri-Fold-in Pos. Adj. ....................3-30 03 Multi Folder (Fold) Adj. \ 03 Tri-Fold-out Pos. Adj. ..................3-33 03 Multi Folder (Fold) Adj. \ 04 Double Parallel Pos. Adj. .............3-36 03 Multi Folder (Fold) Adj. \ 05 Z-Fold Position Adj. .....................3-39 03 Multi Folder (Fold) Adj. \ 06 Gate Fold Position Adj. ................3-42 bizhub PRO C6500P Contents-4 3.5 3.5.1 3.5.2 3.6 3.6.1 3.6.2 3.6.3 3.6.4 3.6.5 3.6.6 3.6.7 3.6.8 3.7 3.7.1 3.8 3.8.1 3.8.2 3.8.3 3.8.4 3.8.5 3.8.6 3.8.7 3.8.8 3.8.9 3.8.10 3.8.11 3.9 3.9.1 3.9.2 3.9.3 3.9.4 3.9.5 03 Finisher Adjustment (LS-501) ................................................... 3-45 05 Stacker Adjustment \ 01 Paper Width Adjustment ................. 3-45 05 Stacker Adjustment \ 02 Paper Length Adjustment ............... 3-47 03 Finisher Adjustment (SD-501) ................................................... 3-49 06 Saddle Stitcher Adj. \ 01 Staple Center Adj. ........................... 3-49 06 Saddle Stitcher Adj. \ 02 Staple Paper Width Adj. .................. 3-52 06 Saddle Stitcher Adj. \ 03 Staple Pitch Adjustment ................. 3-55 06 Saddle Stitcher Adj. \ 04 Half Fold Position Adj. .................... 3-57 06 Saddle Stitcher Adj. \ 05 Tri-Fold Position Adj. ...................... 3-59 06 Saddle Stitcher Adj. \ 06 Fold Paper Width Adj. ..................... 3-62 06 Saddle Stitcher Adj. \ 07 Trimming Adjustment ...................... 3-64 06 Saddle Stitcher Adj. \ 08 Trimming Receiver Adj. ................... 3-66 03 Finisher Adjustment (RU-503/RU-504) .................................... 3-68 07 RU Adjustment \ 01 Curl Reform Direction ............................. 3-68 Finisher Adjustment (PB-501) ........................................................ 3-70 01 Cover Trimming Adjustment ................................................... 3-70 02 Cover Lead Edge Adjustment ................................................. 3-73 03 Spine Corner Forming Position Adjustment ........................... 3-75 04 Pasting Start Position Adjustment .......................................... 3-77 05 Pasting Finish Position Adjustment ........................................ 3-79 06 Paste Formation Finish Position Adjustment .......................... 3-81 07 Temperature Adjustment ........................................................ 3-83 08 Sub Compile CD Width Adjustment ........................................ 3-85 09 Clamp CD Width Adjustment .................................................. 3-88 10 Cover Up/Down CD Width Adjustment ................................... 3-91 11 Clamp FD Position Adjustment ............................................... 3-93 03 Finisher Adjustment (FS-520/FS-607) ...................................... 3-95 01 Saddle Stitcher Stopper Adj. (FS-607 Only) ........................... 3-95 02 Half Fold Stopper Adjustment (FS-607 Only) .......................... 3-98 03 Punch Adjustment \ 01 Vertical Position Adj. (FS-520/FS-607) ......................................................................... 3-100 03 Punch Adjustment \ 02 Horizontal Position Adj. (FS-520/FS-607) ......................................................................... 3-102 03 Punch Adjustment \ 03 Registration Adjustment (FS-520/FS-607) ......................................................................... 3-104 bizhub PRO C6500P Contents-5 3.9.6 3.9.7 3.9.8 3.9.9 3.9.10 3.9.11 03 Punch Adjustment \ 04 Paper Edge Detect Sensor Adj. (FS-520/FS-607) .........................................................................3-106 04 Tri-Fold Adjustment (FS-607 Only) ........................................3-107 05 2 Position Staple Pitch Adjustment (FS-607 Only) ................3-109 06 Paper Inserter Tray Size Adj. (FS-520/FS-607) ......................3-111 07 Output Quantity Limit (FS-520/FS-607) .................................3-113 08 Curl Adjustment (FS-520/FS-607) .........................................3-115 4 Utility Screen Outlines 4.1 4.2 4.3 Chart of Setting Items on Utility Screen ..........................................4-4 Function List of User Setting ............................................................4-9 Function List of Machine Administrator Setting ...........................4-12 5 User Setting 5.1 5.2 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 5.2.10 5.2.11 5.2.12 5.2.13 5.2.14 5.3 5.4 5.5 5.5.1 User Setting Outlines ........................................................................5-3 01 System Setting ..............................................................................5-6 01 Language Setting .......................................................................5-6 02 Unit Setting ................................................................................5-8 03 Feed Tray Setting \ 01 Paper Setting ........................................5-9 03 Feed Tray Setting \ 02 Paper Feed Auto Selection .................5-10 03 Feed Tray Setting \ 03 ATS Permit Setting ..............................5-12 03 Feed Tray Setting \ 04 Auto Paper Type .................................5-13 03 Feed Tray Setting \ 05 Dehumidification Fan ..........................5-15 04 Reset Setting \ 01 Auto Reset Setting .....................................5-17 05 Default Screen Setting .............................................................5-19 06 Power Save Setting .................................................................5-21 07 Time and Date Setting .............................................................5-24 08 Buzzer Setting ..........................................................................5-26 09 Key Response Time .................................................................5-29 10 Service Port Device .................................................................5-30 02 Common Setting .........................................................................5-32 03 Printer Setting .............................................................................5-35 04 Image Quality Setting .................................................................5-40 01 Screen ......................................................................................5-40 Contents-6 bizhub PRO C6500P 6 Machine Administrator Setting 6.1 6.2 6.2.1 6.2.2 6.2.3 6.2.4 6.2.5 6.2.6 6.2.7 6.2.8 6.2.9 6.2.10 6.2.11 6.2.12 6.2.13 6.2.14 6.2.15 6.2.16 6.2.17 6.2.18 6.2.19 6.2.20 6.2.21 6.2.22 Machine Administrator Setting Outlines ........................................ 6-3 01 System Setting ............................................................................. 6-6 01 Power Save Setting ................................................................... 6-6 02 Time and Date Setting .............................................................. 6-8 03 Weekly Timer Setting \ 01 Weekly Timer On/Off Set ................ 6-9 03 Weekly Timer Setting \ 02 Timer Setting ................................ 6-11 03 Weekly Timer Setting \ 03 Timer Action On/Off Set ............... 6-14 03 Weekly Timer Setting \ 04 Lunch Hour Off Setting ................. 6-16 03 Weekly Timer Setting \ 05 Timer Interrupt Password Set ....... 6-18 04 Expert Adjustment \ 01 Printer Adjustment \ 01 Restart Timing Adjustment ................................................................................... 6-20 04 Expert Adjustment \ 01 Printer Adjustment \ 02 Centering Adjustment ................................................................................... 6-22 04 Expert Adjustment \ 01 Printer Adjustment \ 03 FD-Mag. Adjustment ................................................................................... 6-24 04 Expert Adjustment \ 01 Printer Adjustment \ 04 CD-Mag. Adjustment ................................................................................... 6-26 04 Expert Adjustment \ 01 Printer Adjustment \ 05 Lead Edge Erase Adjustment ................................................................................... 6-28 04 Expert Adjustment \ 01 Printer Adjustment \ 06 Registration Loop Adj. ............................................................................................... 6-30 04 Expert Adjustment \ 01 Printer Adjustment \ 07 Pre-registration Adj. ................................................................ 6-32 04 Expert Adjustment \ 02 Finisher Adjustment .......................... 6-34 04 Expert Adjustment \ 03 Process Adjustment \ 01 Front & Back Density ......................................................................................... 6-35 04 Expert Adjustment \ 03 Process Adjustment \ 02 Toner Density Sensor .......................................................................................... 6-37 04 Expert Adjustment \ 03 Process Adjustment \ 03 Toner Quality/Exposure .......................................................................... 6-38 04 Expert Adjustment \ 04 Quality Adjustment \ 01 Printer Gamma Offset Adj. .................................................................................... 6-40 04 Expert Adjustment \ 04 Quality Adjustment \ 02 Image Quality Stability ........................................................................................ 6-42 04 Expert Adjustment \ 04 Quality Adjustment \ 03 Custom Screen ....................................................................... 6-44 04 Expert Adjustment \ 05 Execute Adjust Operation ................. 6-46 bizhub PRO C6500P Contents-7 6.2.23 6.2.24 6.2.25 6.2.26 6.2.27 6.3 6.4 6.4.1 6.4.2 6.4.3 6.4.4 6.4.5 6.4.6 6.4.7 6.5 6.5.1 6.5.2 6.6 6.7 6.7.1 6.8 6.8.1 6.8.2 6.8.3 6.8.4 05 List/Count ................................................................................6-48 06 Size Setting ..............................................................................6-50 08 Perfect Binding Setting\ 01 Useful Paper Weight ....................6-53 08 Perfect Binding Setting\ 02 Paper Count Limit ........................6-55 08 Perfect Binding Setting\ 03 Unfitting Cover Stop ....................6-57 02 Administrator Register ...............................................................6-59 03 User Auth./Account Track .........................................................6-61 01 Authentication Method ............................................................6-61 02 User Authentication Set \ 01 Management Setting .................6-64 02 User Authentication Set \ 02 User Register .............................6-67 02 User Authentication Set \ 03 User Counter .............................6-75 03 Account Track \ 01 Account Register ......................................6-77 03 Account Track \ 02 Account Counter ......................................6-84 04 Without Authentication ............................................................6-86 04 Network Setting ..........................................................................6-88 01 Machine NIC Setting ................................................................6-88 02 E-Mail Initial Setting .................................................................6-90 05 Common Setting .........................................................................6-92 06 System Connection ....................................................................6-95 01 Administrator ...........................................................................6-95 07 Security Setting ..........................................................................6-97 01 Administrator Password ..........................................................6-97 02 HDD Lock Password ................................................................6-99 03 Overwrite image data .............................................................6-101 04 Security Strengthen Set .........................................................6-102 7 8 Touch Screen Adjustment Web Utilities Setting 8.1 8.2 8.2.1 8.2.2 8.3 8.4 Web Utilities Outlines ........................................................................8-3 Setting Account Track Data .............................................................8-5 Adding Account Track ....................................................................8-5 Editing Account Track Data ............................................................8-9 Remote Panel Setting .....................................................................8-18 Transmitting Machine Setting File .................................................8-21 bizhub PRO C6500P Contents-8 9 Appendix 9.1 How to Input Characters .................................................................. 9-3 10 Index bizhub PRO C6500P Contents-9 Composition of User's Guide This machine is provided with the following user's guides as printed matters. * bizhub PRO C6500P User's Guide - Main Body (This book) This guide describes an outline of the machine and print operations. Please refer to this guide for safety information, turning on/off the machine, paper supply, dealing with machine trouble such as paper jam, a setup and management of the machine including registration of paper, tray setting and a network setting. * bizhub PRO C6500P User's Guide - Security This guide describes the security functions. Please refer to this guide for how to use the Security Strengthen mode, and for detailed machine operation in Security Strengthen mode. To operate safely, be sure to read "Section 1: Introduction/ Safety Information" in "bizhub PRO C6500P User's Guide - Main Body" before using the machine. Contents-10 bizhub PRO C6500P Machine Information & Printing Operation 1 Introduction/ Safety Information Introduction/ Safety Information 1 1 Introduction/ Safety Information Thank you for choosing this machine. This manual contains details on the operation of the various functions of the machine, precautions on its use, and basic troubleshooting procedures. In order to ensure that this machine is used correctly and efficiently, carefully read this manual before using the machine. After reading the manual, store it in the designated holder so that it can easily be referred to when questions or problems arise during operation. The illustrations used in this manual may appear slightly different from views of the actual equipment. FEDERAL OR STATE STATUTES MAY PROHIBIT THE COPYING OF CERTAIN DOCUMENTS OR INFORMATION, RESULTING IN FINES OR IMPRISONMENT FOR VIOLATORS. ACKNOWLEDGEMENTS: - KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC. - bizhub PRO is registered trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, Inc. - Microsoft, MS, Windows and MS-DOS are registered trademarks or trademarks of Microsoft Corporation in the United States and / or other countries. - IBM is a registered trademarks of the IBM Corporation. - Macintosh and PowerMac are registered trademarks or trademarks of Apple Computer, Inc. in the United States and / or other countries. - Adobe, Adobe Logo, Acrobat, Acrobat Logo, PostScript and PostScript Logo are registered trademarks or trademarks of Adobe Systems, Inc. - RC4® is a registered trademark or trademark of RSA Security Inc. in the United States and/or other countries. - Other company names and product names used in this manual are the registered trademarks or trademarks of their respective companies. Copyright © 2007 KONICA MINOLTA BUSINESS TECHNOLOGIES, Inc. Copyright © 2007 GoAhead Software, Inc. All rights reserved. bizhub PRO C6500P 1-3 1 Introduction/ Safety Information EXEMPTION - No part of this manual may be used or duplicated without permission. - Manufacturer and Sales Company will have no liability for any influences caused by using the printing system and this User's Guide. - The information written in this User's Guide is subject to change without prior notice. 1-4 bizhub PRO C6500P Introduction/ Safety Information 1 1.1 Energy Saver Auto Low Power This function conserves energy by lowering the set temperature of the fixing unit. In the standard setting, Auto Low Power operates automatically when 15 minutes have elapsed after completion of the last print, with the machine remaining in the ready to print state during that time. The time period for the Auto Low Power function can be set for 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 240 minutes. This function can be disabled in the user setting or Machine Administrator setting. Automatic Shut-Off This function achieves further energy conservation by partially turning the power supply OFF, thereby reducing energy consumption to 7.9 W or less. In the standard setting, Automatic Shut-Off follows Auto Low Power, operating automatically when 90 minutes have elapsed after completion of the last print, with the machine remaining in the ready to print state during that time. The time period for the Automatic Shut-Off function can be set for 1 minute, 30 minutes, 60 minutes, 90 minutes, 120 minutes or 240 minutes. We recommend that you utilize the Auto Low Power function and Automatic Shut-Off function. This function can be disabled in the user setting or Machine Administrator setting. bizhub PRO C6500P 1-5 1 1.2 LICENSE Introduction/ Safety Information For Information on Incorporated Softwares The softwares installed in this product comprise various independent software modules and components. Each software module or component is copyrighted by the author, i.e. the one we wrote will be copywrited by us, and others will also be copywrited by each author. This product uses some free softwares as a part of software components. The following is information on the end user license agreement provided to the software components included in this product. Using TimeSys Linux As an operating system, this machine uses TimeSys Linux 4.0 distributed by TimeSys Corporation in the Unite States. For details of the OS, please contact directly to TimeSys Corporation or their sales representative. http://www.timesys.com/ About License Granted to Each Software Component The GPL, LGPL, or OpenSSL license is granted to some of the software components included in this product. Grateful acknowledgements are due to the authors of those softwares, and to members of the community being engaged in data management and other activities concerning the softwares. The GPL/LGPL is, as mentioned below, designed to guarantee (or even responsible for) the users that they can receive the source code whenever they want. For details, please refer to our homepage. http://konicaminolta.com/opensource/ As for our software components, we hope you understand that the source code cannot be provided because they need not be open. Here is a copy of the original text of the GPL, LGPL, and Open SSL licence granted to the software components included in this product. _______________________________________________________________ GNU GENERAL PUBLIC LICENSE (Version 2, June 1991) Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble 1-6 bizhub PRO C6500P Introduction/ Safety Information 1 The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent bizhub PRO C6500P 1-7 1 Introduction/ Safety Information this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such 1-8 bizhub PRO C6500P Introduction/ Safety Information 1 modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. bizhub PRO C6500P 1-9 1 Introduction/ Safety Information 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 1-10 bizhub PRO C6500P Introduction/ Safety Information 1 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. bizhub PRO C6500P 1-11 1 Introduction/ Safety Information This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF 1-12 bizhub PRO C6500P Introduction/ Safety Information 1 THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS _______________________________________________________________ GNU LESSER GENERAL PUBLIC LICENSE (Version 2.1, February 1999) Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary bizhub PRO C6500P 1-13 1 Introduction/ Safety Information General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. 1-14 bizhub PRO C6500P Introduction/ Safety Information 1 Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived bizhub PRO C6500P 1-15 1 Introduction/ Safety Information from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this 1-16 bizhub PRO C6500P Introduction/ Safety Information 1 License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees bizhub PRO C6500P 1-17 1 Introduction/ Safety Information extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 1-18 bizhub PRO C6500P Introduction/ Safety Information 1 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library bizhub PRO C6500P 1-19 1 Introduction/ Safety Information among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machinereadable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. 1-20 bizhub PRO C6500P Introduction/ Safety Information 1 It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library sideby-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. bizhub PRO C6500P 1-21 1 Introduction/ Safety Information You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 1-22 bizhub PRO C6500P Introduction/ Safety Information 1 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE bizhub PRO C6500P 1-23 1 Introduction/ Safety Information OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS _______________________________________________________________ How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. 1-24 bizhub PRO C6500P Introduction/ Safety Information 1 You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. , 1 April 1990 Ty Coon, President of Vice That's all there is to it! _______________________________________________________________ LICENSE ISSUES ============== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. OpenSSL License --------------Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. bizhub PRO C6500P 1-25 1 Introduction/ Safety Information 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact opensslcore@openssl.org. 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)" THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). 1-26 bizhub PRO C6500P Introduction/ Safety Information 1 Original SSLeay License ----------------------- Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related . bizhub PRO C6500P 1-27 1 Introduction/ Safety Information 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] 1-28 bizhub PRO C6500P Introduction/ Safety Information 1 1.3 Available Features Auto Low Power Automatically lowers the power after a specified period of machine inactivity. Auto Reset Automatically resets to the default settings after a specified period of machine inactivity. Auto Shut-Off Automatically shuts off the power after a specified period of machine inactivity. Booklet Pagination Creates a multiple page signature booklet printed on both sides of paper in 1-2 or 2-2 mode. Chapters Starts chapter pages on the right side (front pages) of the finished document. Only duplex mode (1-2) is compatible with this feature. Color Mode Prints full colored originals or makes single-colored prints, and also adjustments image quality of the prints. Combine Originals Prints a fixed number (2, 4, or 8) of pages onto one sheet of paper to create a draft print of a multi-page report at the same time as saving paper. Image Repeat Selects the horizontal image area across the page, and repeats it down the page as many times as the repeat width setting (10 ~ 150 mm) permits in manual or auto. Insert Sheet Insert up to 26 blank or printed sheets from any tray, or inserts blank or printed front and back covers from any tray to enhance the presentation of multipage documents. bizhub PRO C6500P 1-29 1 Job List Introduction/ Safety Information Displays the Job List Screen to view the current machine status, changes the operation order of reserve jobs, deletes the unused reserve job, or displays the previous job list. Manual Shut-off Shuts off the machine' power when pressing [Power Save] on the control panel. Neg./ Pos. Reverse Reverses the image from black-on-white to white-on-black or vice versa. Output for Finisher FS-520/FS-607 with Paper Inserter PI-502: Cover sheet feeding Off Line Finisher mode Output for Machine with Finisher FS-503 Installed: Non-Sort, Collate, Uncollate, and Staple modes using the primary (main) tray Collated and Uncollate modes using the secondary (sub) tray Output for Machine with Finisher FS-520 Installed: Non-Sort, Collate, Uncollate, and Staple modes using the primary (main) tray Collate and Uncollate modes using the secondary (sub) tray Output for Machine with Finisher FS-607 Installed: Non-Sort, Collate, Uncollate, and Staple modes using the primary (main) tray Collated and Uncollate modes using the secondary (sub) tray Output for Machine with Large Capacity Stacker LS-501 Installed: Non-Sort, Collate, and Uncollate modes using the stacker Collated and Uncollate modes using the stacker secondary (sub) tray Output for FS-503 Finisher with Folding Unit FD-501 Installed: Punch Folding (Z-fold, Tri Fold-in, Tri Fold-out, Double Parallel, Gate, Folding) Cover sheet feeding Output for Machine with SD-501 Saddle Stitcher Installed: Fold & Staple, Trimming Folding (Multi Half Fold, Multi Tri-Fold) 1-30 bizhub PRO C6500P Introduction/ Safety Information Output for Machine with Perfect Binder PB-501 Installed: Perfect Binding, Trimming Page Margin 1 Creates or removes a binding margin at the top, bottom, right and left edges (shift amount from 0 ~ 250mm, in 1mm increments); reduces image to prevent image loss (reduce & shift amount from 0 ~ 250mm, in 1mm increments). Power Save Automatically turns off all but nominal power supply after a specified period of machine inactivity, for optimal efficiency. Power is returned after a brief warm up period by pressing [Power Save] on the control panel. Stamp Prints stamp (Built-in Stamp, Set Numbering, Page No., Date/Time) and watermark (Watermark, Set Numbering, Copy Protect) onto the output sheets to enhance the presentation and usefulness of the prints. Staple Selects the stapling position and number of staples. Weekly Timer Can be set according to the needs of each work environment. Turns main body power Off/On daily or weekly, during lunch time, on holidays, and also enables the Timer Interrupt mode, which allows temporary use of the machine even when the machine is in the daily, weekly, or holiday Off mode. bizhub PRO C6500P 1-31 1 1.4 Safety Information Introduction/ Safety Information This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please read the following section before connecting the machine to the supply. It contains important information related to user safety and preventing equipment problems. Please keep this manual in a handy place near the machine. Make sure you observe all of the precautions appear in each section of this manual. 2 Note Some parts of the contents of this section may not correspond with the purchased product. Warning and Precaution Symbols The following indicators are used on the warning labels or in this manual to categorize the level of safety warnings. WARNING CAUTION Meaning of Symbols Ignoring this warning could cause serious injury or even death. Ignoring this caution could cause injury or damage to property. A triangle indicates a danger against which you should take precaution. This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A solid circle indicates an imperative course of action. This symbol indicates you must unplug the device. 1-32 bizhub PRO C6500P Introduction/ Safety Information 1 Disassemble and modification WARNING · Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness. · Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness. Power cord WARNING · Use only the power cord supplied in the package. If a power cord is not supplied, only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock. · Use the power cord supplied in the package only for this machine and NEVER use it for any other product. Failure to observe this precaution could result in a fire or electrical shock. · Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown. Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. bizhub PRO C6500P 1-33 1 Power source Introduction/ Safety Information WARNING · Use only the specified power source voltage. Failure to do that could result in a fire or electrical shock. · Connect power plug directly into wall outlet having the same configuration as the plug. Use of an adapter leads to the product connecting to inadequate power supply (voltage, current capacity, grounding), and may result in fire or shock. If proper wall outlet is not available, the customer shall ask qualified electrician for the installation. · Do not use a multiple outlet adapter nor an extension cord in principle. Use of an adapter or an extension cord could cause a fire or electrical shock. Contact your authorized service representative if an extension cord is required. · Consult your authorized service representative before connecting other equipment on the same wall outlet. Overload could result in a fire. CAUTION · The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emergency occurs. 1-34 bizhub PRO C6500P Introduction/ Safety Information 1 Power plug WARNING · Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result. · Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock. CAUTION · Do not tug the power cord when unplugging. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. · Remove the power plug from the outlet more than one time a year and clean the area between the plug terminals. Dust that accumulates between the plug terminals may cause a fire. Grounding WARNING · Connect the power cord to an electrical outlet that is equipped with a grounding terminal. bizhub PRO C6500P 1-35 1 Installation Introduction/ Safety Information WARNING · Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or breakdown. Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. CAUTION · After installing this product, mount it on a secure base. If the unit moves or falls, it may cause personal injury. · Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result. · Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration and shock. It could drop or fall, causing personal injury or mechanical breakdown. · Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction. · Do not use flammable sprays, liquids, or gases near this product, as a fire could result. 1-36 bizhub PRO C6500P