Quick Start Guide Prep p paration The battery pack 1 Charge the battery pack until the CHARGE lamp lights off. Shoo o oting The lens 1 Remove the caps. Playb yback yb b Press . The memory card Date/time setup 1 Turn the camera on. 1 Set the mode dial to AUTO. 2 Look into the viewfinder. CHARGE lamp 2 Insert the battery pack into the camera. Do not touch inside parts. If dust enters the camera, it may Adjust the diopter-adjustment dial if the camera. To play back a previous or next image: press / on the controller. To return to the shooting mode: focus of the viewfinder is not achieved. 2 Set up the date/time. Support the lens from below. Face side with a label When inserting a memory card, turn the appear on the photo image. Do not leave the camera and lens without the caps. When you change the lens, do it quickly in a location free from dust. 2 Attach the lens. Align the marks. To delete the image Press . camera off. For available memory cards, refer to the Instruction Manual. 3 Press the shutter button halfway down to focus. Pressing the shutter button halfway down and holding it activates the autofocus. Firmly insert the battery pack all the way while pressing the lock lever with the tip of the battery. Turn the lens until it clicks. 4 Press the shutter button fully down to shoot. To fully enjoy the features of your single lens reflex camera, consult the "Instruction Manual." ...