User manual SONY ICD-UX71F - annexe 1

This Quick Start Guide describes only basic operations, such as how to record, play back, or erase messages. The operating instructions explaining all the features and functions are supplied with the IC recorder as PDF files in 19 languages stored on the supplied CD-ROM. You can copy the PDF files of the operating instructions to your computer. Insert the supplied CDROM into the CD-ROM drive of your computer, and just follow the instructions shown on the screen. If the instructions are not shown on the screen, rightclick the CD-ROM on Windows Explorer to open, and double-click [SetupLauncher.exe]. The English edition of the operating instructions is supplied as a booklet as well. Applicable accessories: Headphones, USB connection support cable Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. For customers in Europe Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. GB Notice for the customers: the following information is only applicable to equipment sold in the countries applying EU directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. The recorded music is limited to private use only. Use of the music beyond this limit requires permission of the copyright holders. Sony is not responsible for incomplete recording/downloading or damaged data due to problems of the IC recorder or computer. Depending on the types of the text and characters, the text shown on the IC recorder may not be displayed properly on device. This is due to: The capacity of the connected IC recorder. The IC recorder is not functioning normally. Content information is written in the language or the character that is not supported by the IC recorder. GB Table of Contents Checking the Contents of the Package.......................................................5 Utilizing Your Computer Using the IC Recorder with Your Computer ...........................................................18 Transferring Files from Your Computer to the IC Recorder .........................................21 Playing Back Music Files ............................22 Getting Started Step 1: Preparing a Power Source .......6 Step 2: Setting the Clock...........................7 Step 3: Setting the Language to Be Used in the Display Window ..................10 Turning the IC Recorder On or Off ......11 Listening to the FM Radio Tuning in an FM radio Station ...............23 Presetting FM Radio Stations Automatically ...................................................25 Listening to a Preset Radio Station .....26 Erasing Preset FM Radio Stations .........28 Precautions ........................................................29 Recording/Playing Back Messages Recording Messages....................................12 Playing Back Messages...............................14 Editing Messages Erasing Messages...........................................15 GB Checking the Contents of the Package IC Recorder (1) Carrying case (1) Battery case (1) CD-ROM (1) (The operating instructions are stored as PDF files.) Operating Instructions Remove the film on the display window before you use the IC recorder. NH-AAA (size AAA) rechargeable battery (1) Stereo headphones (1) USB connection support cable (1) GB Getting Started 2 Insert one NH-AAA rechargeable Step 1: Preparing a Power Source Remove the film on the display window before you use the IC recorder. battery with correct polarity, and close the lid. Inserting the battery 1 Slide and lift the battery compartment lid. 3 Charge the battery by connecting the USB connector of the IC recorder to your computer. Computer IC recorder To USB connector GB Disconnecting the IC recorder from your computer Follow the procedures below; otherwise, data may be damaged. Step 2: Setting the Clock 1 Make sure that the operation indicator is not flashing. 2 Disconnect the IC recorder from the USB connector of the computer. On the Windows screen, left-click "Safely Remove Hardware" on the taskbar, and click "Safely remove USB Mass Storage Device." On the Macintosh screen, drag the "IC RECORDER" on the desktop to "Trash" and drop it there. For details on disconnecting the IC recorder, refer to the operating instructions supplied with your computer. , /MENU ENT You need to set the clock to use the alarm function or record the date and time. Clock setting display appears when you insert battery for the first time, or when you insert a battery after the IC recorder has been without battery for more than 3 minutes, "SET DATE & TIME" appears, and then the year section flashes in the display window. GB Continued directly from "Step 1: Preparing a Power Source" Setting the clock using the menu While the IC recorder is in the stop mode, you can set the clock using the menu. 1 Press or on the control button to set the year, month, day, hour, and minute in sequence, and then press ENT. 1 Select "DATE & TIME" in the menu. Press and hold /MENU to enter the menu mode. The menu mode will be displayed in the display window. 2 Press (stop) to return to the display of the stop mode. Press or on the control button to select "DETAIL MENU," and then press ENT. Press or on the control button to select "DATE & TIME," and then press ENT. GB 2 Press the or on the control button to select "08y1m1d," and then press ENT. To display the current date and time Press (stop) to display the current date and time. 3 Press or on the control button to set the year, month, day, hour, and minute in sequence, and then press ENT. 4 Press (stop) to return to the display of the stop mode. Note If you do not press ENT within one minute of entering the clock setting data, the clock setting mode is cancelled and the window will return to the display of the stopmode. GB Step 3: Setting the Language to Be Used in the Display Window 2 Press or on the control button to select "DETAIL MENU," and then press ENT. , 3 Press or on the control button to select "LANGUAGE," and then press ENT. ENT /MENU 4 Press or on the control button to select the language that you want to use, and then press ENT. You can select the following languages. European model : ENGLISH, Pycc (Russian) Other models : ENGLISH, Pycc (Russian), (Japanese), (Korean), (Chinese), (Chinese), (Thai) You can select the language to be used for messages, menus, folder names, file names, etc. from 2 languages (European model)/7 languages (other models). 1 Press and hold the menu mode. /MENU to enter The menu mode window will be displayed. 10 GB Turning the IC Recorder On or Off Turning the power off Slide the HOLD switch in the direction of the arrow in the stop mode. "HOLD" lights up and the key mark flashes and then "POWER OFF" is displayed. The IC recorder turns off within a few seconds. Turning the power on Slide the HOLD switch in the opposite direction from that of the arrow. The IC recorder is turned on, and an accessing animation is displayed. Tips When you are not going to use the IC recorder for a long time, we recommend to turn off the IC recorder. When 10 minutes have passed after you have turned on the IC recorder and leave it without doing anything, the display goes off automatically. (Press any button to show the display.) When you are not using the IC recorder, you can prevent the battery from getting weak quickly by turning the power off. 11 GB Recording/Playing Back Messages Recording Messages Built-in microphones (headphone) jack Operation indicator , /MENU ENT 1 Select a folder. Press 2 Start recording. Press (record/pause) in the stop /MENU to display the folder selection window. Press or on the control button to select the folder in which you want to record messages ( FOLDER01-05), and then press ENT. mode. The operation indicator lights in red. (When "LED" is set to "OFF" in the menu, the operation indicator does not light.) You do not need to press and hold (record/pause) while recording. 1 GB The new message will be automatically recorded after the last recorded message. Speak into the built-in microphones. 3 Press (stop) to stop recording. The IC recorder stops at the beginning of the current recording. 1 GB Playing Back Messages Operation indicator VOL +, ­ , /MENU 1 Select a folder. Press /MENU. Press or on the control button to 3 Press to start playback. The operation indicator lights in green. (When "LED" is set to "OFF" in the menu, the operation indicator does not light.) select the folder, and then press ENT. 2 Press or to select the message you want to play. 4 Press VOL + or ­ on the control button to adjust the volume. 5 Press (stop) to stop playback. 1 GB Editing Messages Erasing Messages You can erase the recorded messages one by one or all messages in a folder at a time. Note Once a recording has been erased, you cannot retrieve it. You can erase unwanted messages, retaining all other messages when the IC recorder is in the stop or playback mode. When a message is erased, the remaining messages will advance and be renumbered so that there will be no space between messages. 1 Select the message you want to erase. 2 Press and hold Erasing messages one by one the menu mode. /MENU to enter The menu mode window will be displayed. 3 Press or on the control button , to select "ERASE A FILE," and then press ENT. The message to be erased will be played back. ENT /MENU 1 GB 4 Press or on the control button to select "EXECUTE," and then press ENT. "ERASING ..." appears in the display window and the selected message will be erased. Erasing all messages in a folder , ENT /MENU To cancel erasing Select "CANCEL" in step 4, and then press ENT. To erase another message Proceed with the same steps again from the beginning. 1 Select the folder containing the 2 Press and hold To erase a part of one message Divide the message into two messages first, and then proceed with the same steps from the beginning. messages you want to erase when the IC recorder is in the stop mode. the menu mode. /MENU to enter The menu mode window will be displayed. 1 GB 3 Press or on the control button to select "ERASE ALL," and then press ENT. 4 Press or on the control button "ERASING ..." appears in the display window and all messages in the selected folder will be erased. to select "EXECUTE," and then press ENT. To cancel erasing Select "CANCEL" in step 4, and then press ENT. 1 GB Utilizing Your Computer Notes Using the IC Recorder with Your Computer System requirements Operating systems: Windows Vista® Ultimate Windows Vista® Business Windows Vista® Home Premium Windows Vista® Home Basic Windows® XP Media Center Edition 2005 Service Pack 2 or higher Windows® XP Media Center Edition 2004 Service Pack 2 or higher Windows® XP Media Center Edition Service Pack 2 or higher Windows® XP Professional Service Pack 2 or higher Windows® XP Home Edition Service Pack 2 or higher Windows® 2000 Professional Service Pack 4 or higher Mac OS X (v10.2.8-v10.5) Pre-Installed Operation is not guaranteed if any operating system other than those described above (Windows® 98 or Linux, etc.) is used. Any 64 bit operating system is not supported. For the latest version information and compatibility with your operating system, please access the support home page for the IC recorder: European model: http://support.sony-europe.com/DNA Other models: http://www.sony-asia.com/support Hardware environment: ­ Port: USB port ­ Sound board: Sound cards compatible with any of the supported Microsoft® Windows® operating systems Note The following systems are not supported: Operating systems other than the ones indicated on the left Personally constructed computers or operating systems Upgraded operating systems Multi-boot environment Multi-monitor environment 1 GB When you are using Windows® 000 Professional Install the driver using "SonyRecorder_ Driver.exe" in the IC recorder. Connecting the IC recorder to your computer You can transfer the IC recorder data onto your computer by connecting the IC recorder to the computer. Remove the USB cap from the IC recorder and then connect the IC recorder to the USB connector of your computer. The IC recorder is recognized by the computer as soon as the connection is made. While the IC recorder is connected to the computer, "CONNECTING" is displayed in the display window of the IC recorder. IC recorder Computer To USB connector Tip If the IC recorder cannot be connected to the USB connector of your computer directly, use the supplied USB connection support cable. USB connection support cable (supplied) 1 GB Notes If you connect more than two USB devices to your computer, normal operation will not be guaranteed. Use of this IC recorder with a USB hub or a USB connection support cable other than the supplied cable is not guaranteed. A malfunction may occur depending on the USB devices connected at the same time. Before connecting the IC recorder to the computer, make sure that the battery is inserted in the IC recorder. It is recommended that you disconnect the IC recorder from the computer when you are not using the IC recorder connected to the computer. Disconnecting the IC recorder from your computer Follow the procedures below; otherwise, data may be damaged. 1 Make sure that the operation indicator is not flashing. 2 Disconnect the IC recorder from the USB connector of the computer. On the Windows screen, left-click "Safely Remove Hardware" on the taskbar, and click "Safely remove USB Mass Storage Device." On the Macintosh screen, drag the "IC RECORDER" on the desktop to "Trash" and drop it there. For details on disconnecting the IC recorder, refer to the operating instructions supplied with your computer. 0 GB Transferring Files from Your Computer to the IC Recorder You can play back music or language files (MP3/WMA*) from your computer using the IC recorder. You can make an MP3/WMA file using either a player software application installed on your computer or a commercially available software application. * For the file formats that can be played back using the IC recorder, refer to "Specifications" (page 110 in "Operating Instructions"). Copying a music file from your computer to the IC recorder (drag and drop) 1 Connect the IC recorder to your computer (page 19). On the Windows screen; open "My Computer" and make sure that "IC RECORDER" has been recognized. On the Macintosh screen; make sure that an "IC RECORDER" drive is displayed on the desk top. 2 Copy the folder in which the music files are stored to the IC recorder. On the Windows screen using Explorer, and on the Macintosh screen using Finder, drag and drop the folder onto the IC recorder. The IC recorder can recognize up to 500 folders. You can copy up to 999 files to one folder and up to 5,000 files in total. 1 GB Playing Back Music Files , ENT /MENU 1 Remove the IC recorder from your computer, press /MENU, press or on the control button to select the folder ( ) in which music files are stored, and then press ENT. 2 Press or to select the music file you want to play. 3 Press to start playback. 4 Press (stop) to stop playback. GB Listening to the FM Radio (for ICD-UX1F/UX1F/UX1F only) The headphone cord is an FM antenna, therefore, connect the headphone when listening to the radio. During FM reception or FM recording, you can switch between the sound from the speaker and the sound from the headphones using the menu. For details, see page in "Operating Instructions." Note During FM reception you cannot charge the battery. Tuning in an FM radio Station , ENT /MENU The display in the display window may be different from the actual one in some regions. GB 1 Press and hold the menu mode. /MENU to enter The menu mode window will be displayed. 3 Tune in a station. 4 Press or on the control button 2 Press or on the control button to select "FM RADIO," and then press ENT. The IC recorder enters FM radio mode. repeatedly to tune in a station or press and hold or on the control button until the frequency digits begin to change on the display. The IC recorder automatically scans the radio frequencies and stops when it finds a clear station. If you cannot tune in a station, press or on the control button repeatedly to change the frequency step by step. When a station you tune in is a preset station, the preset number is displayed, otherwise, "P - -" appears instead. You can switch the display between preset number and frequency by pressing ENT. GB Presetting FM Radio Stations Automatically 1 Press and hold /MENU to enter the menu mode when listening to the FM radio. The menu mode window will be displayed. 2 Press or on the control button to select "AUTO PRESET," and then press ENT. , ENT /MENU 3 Press or on the control button to select "EXECUTE," and then press ENT. The IC recorder automatically scans for available radio frequencies and the stations will be stored in memory from the lower frequencies to the higher ones. While presetting FM radio stations automatically, the preset number ready to be assigned flashes. The display in the display window may be different from the actual one in some regions. You can preset up to 30 FM radio stations automatically using the preset menu. GB To stop the automatic presetting Press (stop). The preset numbers stored until you press the (stop) button remain in memory. Listening to a Preset Radio Station ENT /MENU , The display in the display window may be different from the actual one in some regions. GB 1 Press and hold the menu mode. /MENU to enter 3 To tune in a station, press or The menu mode window will be displayed. on the control button repeatedly until the preset number you want is displayed. When you press and hold or on the control button, the preset numbers change rapidly. 2 Press or on the control button to select "FM RADIO," and then press ENT. The IC recorder enters FM radio mode. 4 Press (stop) to turn the FM radio off. GB Erasing Preset FM Radio Stations 1 Press and hold the menu mode. /MENU to enter The menu mode window will be displayed. 2 Press or on the control button to select "FM RADIO," and then press ENT. The IC recorder enters FM radio mode. ENT /MENU , The display in the display window may be different from the actual one in some regions. 3 To tune in a station, press or on the control button repeatedly until the preset number you want to erase is displayed. GB 4 Press and hold ENT. The preset number and "ERASE?" will be displayed on the display. Precautions On power 5 Press or on the control button The preset number will be changed to "P- -." repeatedly to select "EXECUTE," and then press ENT. Operate the unit only on 1.5 V or 1.2 V DC. Use one NH-AAA rechargeable battery or one LR03 (size AAA) alkaline battery. Do not operate the unit while driving, cycling or operating any motorized vehicle. Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. Should any solid object or liquid fall into the unit, remove the battery and have the unit checked by qualified personnel before operating it any further. On safety On handling GB On noise Noise may be heard when the unit is placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback. Noise may be recorded when an object, such as your finger, etc., rubs or scratches the unit during recording. To clean the exterior, use a soft cloth slightly moistened in water. Do not use alcohol, benzine or thinner. Backup recommendations To avoid potential risk of data loss caused by accidental operation or malfunction of the IC recorder, we recommend that you save a backup copy of your recorded messages on a tape recorder or to a computer, etc. On maintenance If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. 0 GB Trademarks Microsoft, Windows, Windows Vista and Windows Media are registered trademarks or trademarks of the Microsoft Corporation in the United States and/or other countries. Apple, Macintosh and Mac OS are trademarks of Apple Inc., registered in the USA and other countries. Nuance, the Nuance logo, Dragon NaturallySpeaking, and RealSpeak are trademarks and/or registered trademarks of Nuance Communications, Inc., and/or its affiliates in the United States and/or other countries. © 2007 Nuance Communications, Inc. All rights reserved. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. Furthermore, " TM " and " ® " are not mentioned in each case in this manual. 1 GB Ce guide de démarrage rapide décrit uniquement les opérations de base, telles l'enregistrement, la lecture ou l'effacement de messages. e mode d'emploi décrivant toutes les caractéristiques et fonctions est fourni avec l'enregistreur IC sous la forme d'un fichier PD en 1 langues et enregistré sur le CD-OM fourni. Vous pouvez copier les fichiers PD du mode d'emploi sur votre ordinateur. Insérez le CD-OM fourni dans le lecteur de CD-OM de votre ordinateur, puis suivez les instructions à l'écran. i les instructions ne s'affichent pas à l'écran, faites un clic droit sur le CD-OM sous Windows xplorer pour l'ouvrir, puis double-cliquez sur [etupauncher.exe]. 'édition anglaise du mode d'emploi est aussi fournie sous la forme d'un livret. Ceci s' fapplique aux accessoires suivants : casque, câble de prise en charge de connexion U Elimination des piles et accumulateurs usagés (Applicable dans les pays de l'Union Européenne et aux autres pays européens disposant de systèmes de collecte sélective) Modèle européen seulement Traitement des appareils électriques et électroniques en fin de vie (Applicable dans les pays de l'Union Européenne et aux autres pays européens disposant de systèmes de collecte sélective) Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit ne doit pas être traité avec les déchets ménagers. Il doit être remis à un point de collecte approprié pour le recyclage des équipements électriques et électroniques. n s'assurant que ce produit est bien mis au rebut de manière appropriée, vous aiderez à prévenir les conséquences négatives potentielles pour l'environnement et la santé humaine. e recyclage des matériaux aidera à préserver les ressources naturelles. Pour toute information supplémentaire au sujet du recyclage de ce produit, vous pouvez contacter votre municipalité, votre déchetterie ou le magasin où vous avez acheté le produit. Ce symbole, apposé sur les piles et accumulateurs ou sur les emballages, indique que les piles et accumulateurs fournis avec ce produit ne doivent pas être traités comme de simples déchets ménagers. n vous assurant que ces piles et accumulateurs sont mis au rebut de façon appropriée, vous participez activement à la prévention des conséquences négatives que leur mauvais traitement pourrait provoquer sur l'environnement et sur la santé humaine. e recyclage des matériaux contribue par ailleurs à la préservation des ressources naturelles. Pour les produits qui pour des raisons de sécurité, de performance ou d'intégrité de données nécessitent une connexion permanente à une pile ou à un accumulateur, il conviendra de vous rapprocher d'un service technique qualifié pour effectuer son remplacement. n rapportant votre appareil électrique en fin de vie à un point de collecte approprié vous vous assurez que la pile ou l'accumulateur incorporé sera traitée correctement. Pour tous les autres cas de figure et afin d'enlever les piles ou accumulateurs en toute sécurité de votre appareil, reportez-vous au manuel d'utilisation. apporter les piles ou accumulateurs usagés au point de collecte approprié pour le recyclage. Pour toute information complémentaire au sujet du recyclage de ce produit ou des piles et accumulateurs, vous pouvez contacter votre municipalité, votre déchetterie locale ou le point de vente où vous avez acheté ce produit. FR Remarque à l'intention des clients : les informations suivantes ne concernent que l'équipement vendu dans les pays appliquant les directives européennes Pour les utilisateurs en France n cas de remplacement du casques/écouteurs, référez-vous au modèle de casques/écouteurs adaptés à votre appareil et indiqué ci-dessous. MD-7 e fabricant de ce produit est ony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japon. e représentant autorisé pour les questions de compatibilité électromagnétique MC et la sécurité des produits est ony Deutschland mbH, Hedelfinger trasse 1, 737 tuttgart, Allemagne. Pour toute question relative au AV ou à la garantie, merci de bien vouloir vous référer aux coordonnées contenues dans les documents relatifs au AV ou la garantie. a musique enregistrée est limitée à un usage privé exclusivement. 'utilisation de la musique au-delà de cette limite nécessite l'autorisation des détenteurs des droits d'auteur. ony ne peut être tenu responsable de tout enregistrement ou téléchargement incomplet ou de dommages causés aux données suite à des problèmes rencontrés par l'enregistreur IC ou l'ordinateur. elon le type de texte et de caractères, le texte affiché sur l'enregistreur IC peut ne pas apparaître correctement sur l'appareil. Ceci est dû : aux caractéristiques techniques de l'enregistreur IC raccordé ; à un défaut de fonctionnement de l'enregistreur IC ; à des informations écrites dans une langue ou avec des caractères non pris en charge par l'enregistreur IC. FR Table des matières Vérification du contenu de l'emballage ........................................................5 Edition de messages Effacement de messages..........................15 Utilisation de l'ordinateur Utilisation de l'enregistreur IC avec l'ordinateur.........................................................18 Transfert de fichiers de votre ordinateur vers l'enregistreur IC............21 Lecture de fichiers musicaux ..................22 Préparation Etape 1 : Préparation d'une source d'alimentation .................................................6 Etape 2 : Réglage de l'horloge...............7 Etape 3 : Réglage de la langue à utiliser dans la fenêtre d'affichage.......................10 Mise sous/hors tension de l'enregistreur IC ...............................................11 Ecouter la radio FM Réglage d'une station de radio FM ....23 Préréglage automatique des stations radio FM...............................................................25 Ecouter une station de radio préréglée.............................................................26 Effacement des stations radio FM préréglées ..........................................................28 Précautions ........................................................29 Enregistrement/Lecture de messages Enregistrement de messages.................12 Lecture de messages...................................14 FR Vérification du contenu de l'emballage Enregistreur IC (1) Etui (1) Boîtier de la pile (1) CD-ROM (1) (Le mode d'emploi est sous la forme de fichiers PDF.) Mode d'emploi Retirez le film de la fenêtre d'affichage avant d'utiliser l'enregistreur IC. Pile rechargeable NH-AAA (AAA) (1) Casque stéréo (1) Câble de prise en charge de connexion USB (1) FR Préparation 2 Introduisez une pile rechargeable Etape 1 : Préparation d'une source d'alimentation Retirez le film de la fenêtre d'affichage avant d'utiliser l'enregistreur IC. NH-AAA en respectant la polarité et refermez le couvercle. Insertion de la pile 3 Chargez la pile en raccordant le 1 Faites glisser et soulevez le connecteur USB de l'enregistreur IC à l'ordinateur. couvercle du compartiment de la pile. Ordinateur Enregistreur IC Vers le connecteur USB FR Déconnexion de l'enregistreur IC de votre ordinateur Suivez les procédures ci-dessous, sinon les données peuvent être endommagées. Etape 2 : Réglage de l'horloge 1 Assurez-vous que l'indicateur de fonctionnement ne clignote pas. connecteur USB de l'ordinateur. Sur l'écran Windows, cliquez sur « Retirer le périphérique en toute sécurité » sur la barre des tâches et cliquez sur « Retirer le périphérique de stockage de masse USB en toute sécurité ». Sur l'écran Macintosh, faites glisser « IC RECORDER » sur le bureau et déposezle dans la « Corbeille ». Pour obtenir des détails sur la déconnexion de l'enregistreur IC, consultez le mode d'emploi fourni avec votre ordinateur. 2 Déconnectez l'enregistreur IC du , /MENU ENT Vous devez régler l'horloge pour utiliser la fonction de réglage de l'alarme ou enregistrer la date et l'heure. L'écran de réglage de l'horloge apparaît lorsque vous introduisez une pile pour la première fois ou lorsque l'enregistreur IC est resté sans pile pendant plus de 3 minutes, « SET DATE & TIME » apparaît et la section de l'année clignote dans la fenêtre d'affichage. FR Suite de « Etape 1 : Préparation d'une source d'alimentation » Réglage de l'horloge à l'aide du menu Lorsque l'enregistreur IC est en mode d'arrêt, vous pouvez régler l'horloge à l'aide du menu. 1 Appuyez sur ou sur le bouton de commande pour régler l'année, le mois, le jour, l'heure et les minutes dans l'ordre, puis appuyez sur ENT. 1 Sélectionnez « DATE & TIME » dans le menu. Maintenez le bouton /MENU enfoncé pour activer le mode de menu. Le mode de menu apparaît dans la fenêtre d'affichage. 2 Appuyez sur (arrêt) pour revenir à l'affichage en mode d'arrêt. Appuyez sur ou sur le bouton de commande pour sélectionner « DETAIL MENU » puis appuyez sur ENT. Appuyez sur ou sur le bouton de commande pour sélectionner « DATE & TIME » puis appuyez sur ENT. FR 2 Appuyez sur ou sur le bouton Remarque de commande pour sélectionner « 08y1m1d » puis appuyez sur ENT. Si vous n'appuyez pas sur ENT dans la minute qui suit la saisie des données de réglage de l'horloge, le mode de réglage de l'horloge est annulé et la fenêtre revient à l'affichage en mode d'arrêt. Pour afficher la date et l'heure actuelles 3 Appuyez sur ou sur le bouton Appuyez sur (arrêt) pour afficher la date et l'heure actuelles. de commande pour régler l'année, le mois, le jour, l'heure et les minutes dans l'ordre, puis appuyez sur ENT.