User manual YAMAHA RX-V663 - annexe 1

U RX-V663 AV Receiver OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols 12 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 13 1 2 3 4 5 6 7 8 9 Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Attachments ­ Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture ­ Do not use this product near water ­ for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. Accessories ­ Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 14 15 16 17 18 19 Ventilation ­ Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. Power Sources ­ This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization ­ This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Power-Cord Protection ­ Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Lightning ­ For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Power Lines ­ An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Overloading ­ Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Object and Liquid Entry ­ Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing ­ Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service ­ Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, Caution-i En IMPORTANT SAFETY INSTRUCTIONS 20 21 22 23 If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. Replacement Parts ­ When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check ­ Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Wall or Ceiling Mounting ­ The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Heat ­ The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. d) 24 Outdoor Antenna Grounding ­ If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING MAST ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810­20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810­21) GROUND CLAMPS Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) NEC ­ NATIONAL ELECTRICAL CODE FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3 NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit "OFF" and "ON", please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave., Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. Caution-ii En CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: ­ other components, as they may cause damage and/or discoloration on the surface of this unit. ­ burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury. ­ containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit. 6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury. 7 Do not plug in this unit to a wall outlet until all connections are complete. 8 Do not operate this unit upside-down. It may overheat, possibly causing damage. 9 Do not use force on switches, knobs and/or cords. 10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable. 11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified. 13 To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm. 14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons. 15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet. 16 Install this unit near the AC outlet and where the AC power plug can be reached easily. 17 Be sure to read the "Troubleshooting" section on common operating errors before concluding that this unit is faulty. 18 Before moving this unit, press L SYSTEM OFF to set this unit to the standby mode, and then disconnect the AC power plug from the AC wall outlet. 19 VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet. Voltages are: Asia model ............................ 220/230­240 V AC, 50/60 Hz General model ........ 110/120/220/230­240 V AC, 50/60 Hz 20 The batteries shall not be exposed to excessive heat such as sunshine, fire or like. 21 Excessive sound pressure from earphones and headphones can cause hearing loss. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by L SYSTEM OFF. In this state, this unit is designed to consume a very small quantity of power. FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003. POUR LES CONSOMMATEURS CANADIENS Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place for future reference. Caution-iii En Contents INTRODUCTION INTRODUCTION Features ................................................................... 2 Supplied accessories .................................................. 2 SIRIUS Satellite RadioTM tuning .........................62 Connecting the SiriusConnectTM tuner .................... 62 Activating SIRIUS Satellite RadioTM subscription ......................................................... 63 Basic SIRIUS Satellite RadioTM operations ............ 63 Setting the SIRIUS Satellite RadioTM preset channels .................................................... 65 Setting the Parental Lock......................................... 65 Displaying the SIRIUS Satellite RadioTM information .......................................................... 67 Notice ....................................................................... 3 Getting started ........................................................ 4 Quick start guide .................................................... 5 PREPARATION Connections ........................................................... 10 Optimizing the speaker setting for your listening room (YPAO) .................................................... 32 Using AUTO SETUP .............................................. 32 PREPARATION Using iPodTM ..........................................................68 Controlling iPodTM................................................... 68 Using BluetoothTM components............................70 Pairing the BluetoothTM adapter and your BluetoothTM component....................................... 70 Playback of the BluetoothTM component ................. 70 BASIC OPERATION Selecting the SCENE templates........................... 37 Selecting the desired SCENE template to the SCENE buttons ................................................................. 37 Creating your original SCENE templates................ 40 Using the remote control for the SCENE feature .... 41 Recording ...............................................................71 BASIC OPERATION ADVANCED OPERATION Advanced sound configurations...........................72 Changing sound field parameter settings................. 72 Selecting decoders ................................................... 78 Playback ................................................................ 42 Basic procedure ....................................................... 42 Selecting the MULTI CH INPUT component......... 43 Selecting the front speaker set ................................. 43 Selecting audio input jacks (AUDIO SELECT)...... 44 Displaying the current status of this unit on a video monitor ................................................................ 44 Using your headphones............................................ 45 Muting the audio output........................................... 45 Playing video sources in the background of an audio source.................. 45 Displaying the input source information ................. 46 Using the sleep timer ............................................... 47 Customizing this unit (MANUAL SETUP).........80 Using SET MENU................................................... 84 1 BASIC MENU...................................................... 85 2 VOLUME MENU ................................................ 89 3 SOUND MENU.................................................... 90 4 INPUT MENU...................................................... 93 5 OPTION MENU................................................... 96 ADVANCED OPERATION Remote control features......................................100 Controlling this unit, a TV, or other components.......... 100 Setting remote control codes ................................. 102 Using multi-zone configuration..........................103 Connecting Zone 2................................................. 103 Controlling Zone 2................................................. 104 ADDITIONAL INFORMATION Sound field programs .......................................... 48 Selecting sound field programs ............................... 48 Sound field program descriptions............................ 48 Enjoying unprocessed input sources (Straight decoding mode) .................................... 51 Advanced setup....................................................106 Using the advanced setup ...................................... 106 ADDITIONAL INFORMATION Troubleshooting...................................................110 Resetting the system............................................119 Glossary................................................................120 Sound field program information......................123 Specifications .......................................................124 Index .....................................................................126 Using audio features ............................................. 52 Adjusting the speaker level...................................... 52 Enjoying pure hi-fi sound ........................................ 52 Adjusting the tonal quality....................................... 52 FM/AM tuning ...................................................... 53 Overview.................................................................. 53 Basic tuning operations............................................ 53 Using station preset feature ..................................... 54 APPENDIX XM Satellite Radio tuning ................................... 57 Connecting the XM Mini-Tuner Dock .................... 57 Activating XM Satellite Radio ................................ 58 Basic XM Satellite Radio operations....................... 58 Setting the XM Satellite Radio preset channels .................................................... 60 Displaying the XM Satellite Radio information .......................................................... 61 APPENDIX (at the end of this manual) Front panel................................................................i Remote control ....................................................... ii List of remote control codes ................................. iii English "ASPEAKERS" or "4DVD" (example) indicates the name of the parts on the front panel or the remote control. Refer to the attached sheet or the pages at the end of this manual for the information about each position of the parts. 1 En FEATURES Features Built-in 7-channel power amplifier Minimum RMS output power (20 Hz to 20 kHz, 0.06% THD, 8 ) Front: 95 W + 95 W Center: 95 W Surround: 95 W + 95 W Surround back: 95 W + 95 W HDMITM (High-Definition Multimedia Interface) HDMI interface for standard, enhanced or high-definition video as well as multi-channel digital audio based on HDMI version 1.3a (HDMI is Licensed by HDMI Licensing, LLC.) ­ Automatic audio and video synchronization (lip sync) information capability ­ Deep Color video signal (30/36 bit) transmission capability ­ "x.v.Color" video signal transmission capability ­ High refresh rate and high resolution video signals capability ­ High definition digital audio format signals capability HDCP (High-bandwidth Digital Content Protection System) licensed by Digital Content Protection, LLC. Analog video to HDMI digital video up-conversion (composite video S-video component video HDMI digital video) capability for monitor out SCENE function Preset SCENE templates for various situations SCENE templates for customizing capability Controlling Yamaha SCENE control signal support component (some models only) working with the SCENE function Sound field programs Proprietary Yamaha technology for the creation of sound fields Compressed Music Enhancer mode Virtual CINEMA DSP SILENT CINEMA DOCK terminal DOCK terminal to connect a Yamaha iPod universal dock (such as YDS-10, sold separately) or Bluetooth adapter (such as YBA-10, sold separately) Digital audio decoders Dolby TrueHD, Dolby Digital Plus decoder DTS-HD Master Audio, DTS-HD High Resolution Audio decoder Dolby Digital/Dolby Digital EX decoder DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS 96/24 decoder Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic IIx decoder Neural Surround decoder Other features YPAO (Yamaha Parametric Room Acoustic Optimizer) for automatic speaker setup 192-kHz/24-bit D/A converter OSD (on-screen display) menus that allow you to optimize this unit to suit your individual audiovisual system 5.1 or 7.1-channel additional input jacks for discrete multichannel input Component video input/output capability includes (3 COMPONENT VIDEO INs and 1 MONITOR OUT) Digital video signal conversion (composite video S-video component video) capability for monitor out Pure Direct mode for pure hi-fi sound for all sources Adaptive dynamic range controlling capability Adaptive DSP effect level controlling capability iPod controlling capability Remote control with preset remote control codes capability Zone 2 custom installation facility Bi-amplification connection capability Sleep timer Radio tuners FM/AM tuning capability XM Satellite Radio tuning capability (using XM Mini-Tuner and Home Dock, sold separately) SIRIUS Satellite RadioTM tuning capability (using SiriusConnect tuner, sold separately) Supplied accessories Check that you received all of the following parts. Remote control Batteries (2) (AAA, R03, UM-4) Optimizer microphone AM loop antenna Indoor FM antenna 2 En Notice Notice About this manual · y indicates a tip for your operation. · Some operations can be performed by using either the buttons on the front panel or the ones on the remote control. In case the button names differ between the front panel and the remote control, the button name on the remote control is given in parentheses. · This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority. · "ASPEAKERS" or "4DVD" (example) indicates the name of the parts on the front panel or the remote control. Refer to the attached sheet or the pages at the end of this manual for the information about each position of the parts. · The symbol " " with page number(s) indicates the corresponding reference page(s). iPodTM "iPod" is a trademark of Apple Inc., registered in the U.S. and other countries. INTRODUCTION BluetoothTM Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement. "HDMI", the "HDMI" logo and "High-Definition Multimedia Interface" are trademarks or registered trademarks of HDMI Licensing LLC. x.v.ColorTM "x.v.Color" is a trademark of Sony Corporation. We Want You Listening For A Lifetime Yamaha and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion ­ and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. "SILENT CINEMA" is a trademark of Yamaha Corporation. The XM name and related logos are registered trademarks of XM Satellite Radio Inc. Neural SurroundTM name and related logos are trademarks owned by Neural Audio Corporation. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. ©2006 SIRIUS Satellite Radio Inc. "SIRIUS", "SiriusConnect", the SIRIUS dog logo, channel names and logos are trademarks of SIRIUS Satellite Radio Inc. Manufactured under license under U.S. Patent No's: 5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademark of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved. English 3 En GETTING STARTED Getting started Installing batteries in the remote control VOLTAGE SELECTOR (Asia and General models only) Caution The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local voltage BEFORE plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard. Rotate the VOLTAGE SELECTOR clockwise or counterclockwise to the correct position using a straight slot screwdriver. Voltages are as follows: Asia model ................... 220/230­240 V AC, 50/60 Hz General model ..................... 110/120/220/230­240 V AC, 50/60 Hz VOLTAGE SELECTOR 230240V 1 3 2 1 2 Take off the battery compartment cover. Insert the two supplied batteries (AAA, R03, UM-4) according to the polarity markings (+ and ­) on the inside of the battery compartment. Snap the battery compartment cover back into place. Voltage indication 3 Notes · Change all of the batteries if you notice that the operation range of the remote control decreases. · Do not use an old battery and a new one together. · Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color. · If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. · Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations. · If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries and set up the remote control code. 4 En Quick start guide Quick start guide The following steps describe the easiest way to enjoy DVD movie playback in your home theater. See pages 11 to 15 for details of the speaker placement. Video monitor Front left speaker Front right speaker Subwoofer Surround right speaker INTRODUCTION Preparation: Check the items Prepare the following items. Speakers Front speakers ................................... x 2 Center speaker .................................. x 1 Surround speakers ............................ x 4 Select magnetically shielded speakers. The minimum required speakers are two front speakers. The priority of the requirement of other speakers is as follows: 1. Two surround speakers 2. Center speaker 3. One (or two) surround back speaker(s) Active subwoofer ................................... x 1 Select an active subwoofer equipped with an RCA input jack. Speaker cables ....................................... x 7 Subwoofer cable .................................... x 1 Select a monaural RCA cable. DVD player .............................................. x 1 Select DVD player equipped with coaxial digital audio output jack and composite video output jack. Video monitor ......................................... x 1 Select a TV monitor, video monitor or projector equipped with a composite video input jack. Video cable ............................................. x 2 Select an RCA composite video cable. Digital coaxial audio cable .................... x 1 y You can also connect two subwoofers to this unit. In this case, prepare two active subwoofers and subwoofer cables. Center speaker Surround back right speaker Surround back left speaker Surround left speaker DVD player Step 1: Set up your speakers P. 6 Step 2: Connect your DVD player and other components P. 7 Step 3: Press SCENE 1 button P. 8 Enjoy DVD playback! English 5 En Quick start guide Step 1: Set up your speakers Place your speakers in the room and connect them to this unit. PRE OUT SUBWOOFER 1 jack AUDIO L Be sure to connect the left channel (L), right channel (R), "+" (red) and "­" (black) properly. Front speakers and center speaker Loosen VIDEO Insert Tighten MULTI CH INPUT FRONT (8CH) CENTER PRE OUT SINGLE CENTER DOCK VIDEO R CD IN MD/ OUT (PLAY) CD-R (REC) DVD DTV/CBL IN DVR OUT IN VCR OUT SUB SB (8CH) SURROUND WOOFER HDMI ZONE 2 OUT FRONT SURROUND SUR. BACK SUBWOOFER 1 2 S VIDEO DTV/CBL DVD IN PR A PB DVD DVR VCR OUT COMPONENT VIDEO DTV/CBL B PB Y Y PR OUT IN OUT MONITOR DVD SIRIUS XM ANTENNA DTV/CBL CD DVD 1 OPTICAL 2 DIGITAL INPUT 3 COAXIAL 4 DVD IN1 DTV/CBL IN2 OUT MONITOR OUT FRONT B/ZONE B/ ZONE 2/PRESENCE AM GND R EXTRA SP L R SPEAKERS FRONT A L C DVR CENTER R SURROUND L SURROUND BACK/BI-AMP R L AC OUTLETS 120V 80Hz 100W MAX. TOTAL 0.8A MAX. TOTAL SWITCHED FM 75 UNBAL. REMOTE TRIGGER OUT IN OUT +12V 15mA MAX. SINGLE Speaker terminals 1 2 Place your speakers and subwoofer in the room. Connect speaker cables to each speaker. To the front right speaker To the front left speaker To the center speaker Surround and surround back speakers Be sure to connect the "+" (red) and "­" (black) properly. Cables are colored or shaped differently, perhaps with a stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the "+" (red) terminals of this unit and your speaker. Connect the plain cable to the "­" (black) terminals. To the surround right speaker To the surround back left speaker To the surround left speaker To the surround back right speaker 4 3 Connect each speaker cable to the corresponding speaker terminal of this unit. 1 2 3 4 Connect the subwoofer cable to the SUBWOOFER PRE OUT 1 jack of this unit and the input jack of the subwoofer. Subwoofer AV receiver DOCK PRE OUT SINGLE CENTER VIDE RROUND SUR. BACK SUBWOOFER 1 2 S VID DVD 1 Make sure that this unit and the subwoofer are unplugged from the AC wall outlets. 2 Twist the exposed wires of the speaker cables together to prevent short circuits. 3 Do not let the bare speaker wires touch each other. 4 Do not let the bare speaker wires touch any metal part of this unit. Input jack Subwoofer cable SUBWOOFER PRE OUT 1 jack y You can also connect another subwoofer to the SUBWOOFER PRE OUT 2 jack. 6 En Quick start guide Step 2: Connect your DVD player and other components VIDEO MONITOR OUT jack DVD DIGITAL INPUT COAXIAL jack AUDIO L 3 Connect the video cable to the VIDEO MONITOR OUT jack of this unit and the video input jack of your video monitor. Video monitor AV receiver INTRODUCTION DVD VIDEO jack VIDEO PRE OUT SINGLE CENTER DOCK VIDEO VIDEO MULTI CH INPUT FRONT (8CH) CENTER R CD IN MD/ OUT (PLAY) CD-R (REC) DVD DTV/CBL IN DVR OUT IN VCR OUT SUB SB (8CH) SURROUND WOOFER HDMI ZONE 2 OUT FRONT SURROUND SUR. BACK SUBWOOFER 1 2 S VIDEO DTV/CBL DVD IN PR A PB DVD DVR VCR OUT COMPONENT VIDEO DTV/CBL B PB Y Y PR OUT IN OUT MONITOR IN DVD SIRIUS XM ANTENNA DTV/CBL CD DVD 1 OPTICAL 2 DIGITAL INPUT 3 COAXIAL 4 DVD IN1 DTV/CBL IN2 OUT MONITOR OUT FRONT B/ZONE B/ ZONE 2/PRESENCE AM GND R EXTRA SP L R SPEAKERS FRONT A L C DVR DVD PB OUT OUT VCR DVR VIDEO DTV/CBL COMPONENT Y B PB PR Y IN OUT MONITOR CENTER R SURROUND L SURROUND BACK/BI-AMP R L AC OUTLETS 120V 80Hz 100W MAX. TOTAL 0.8A MAX. TOTAL SWITCHED FM 75 UNBAL. REMOTE TRIGGER OUT C SINGLE DVR IN OUT +12V 15mA MAX. Video input jack Video cable VIDEO MONITOR OUT jack Make sure that this unit and the DVD player are unplugged from the AC wall outlets. 4 Connect the power plug of this unit and other components into the AC wall outlet. y This unit is equipped with AC OUTLET(S) for the power supply of the other components (except Korea model). See page 28 for details. 1 Connect the digital coaxial audio cable to the digital coaxial audio output jack of your DVD player and the DVD DIGITAL INPUT COAXIAL jack of this unit. AV receiver DVD player AUDIO M FRONT (8CH For further connections · Using the other kind of speaker combinations P. 11 · Connecting a video monitor via various ways of the connection P. 20 · Connecting a DVD player via various ways of the connection P. 21 · Connecting a DVD recorder or a digital video recorder P. 22 · Connecting a set-top box P. 22 · Connecting a CD player, an MD recorder or a turntable P. 23 · Connecting an external amplifier P. 24 · Connecting a DVD player via analog multi-channel audio connection P. 25 · Connecting a Yamaha iPod universal dock or Bluetooth adapter P. 25 · Using the REMOTE IN/OUT jacks P. 26 · Using the VIDEO AUX jacks on the front panel P. 26 IN OUT IN OUT D/ OUT D-R (REC) DVD DTV/CBL DVR VCR SB (8CH CD DVD DVD IN1 3 OPTICAL 4 5 COAXIAL 6 CENTER L SPEAKERS SU R DIGITAL INPUT E B/ FRONT B/ZON E ZONE 2/PRESENC R EXTRA SP L FRONT A R Digital coaxial audio output jack Digital coaxial audio cable DVD DIGITAL INPUT COAXIAL jack 2 Connect the video cable to the composite video output jack of your DVD player and DVD VIDEO jack of this unit. DVD player AV receiver VIDEO DOCK VIDEO S VIDEO DTV/CBL DVD IN OUT PR A PB DVD DVR V COMPONENT PR Y · Connecting a FM/AM antenna P. 27 · Connecting the XM Mini-Tuner Dock P. 57 P. 62 English · Connecting the SiriusConnect tuner OUT Composite video output jack DVD VIDEO jack Video cable 7 En Quick start guide Step 3: Press SCENE 1 button Check the type of the connected speakers. If the speakers are 6 ohm speakers, set "SP IMP." to "6 MIN" before using this unit (see page 28). 4 ohm speakers can be also used as the front speakers (see page 106). About SCENE function Just by pressing one SCENE button, you can turn on this unit and recall your favorite input source and sound field program according to the SCENE template that has been assigned to the SCENE button. The SCENE templates are built combinations of input sources and sound field programs. y If you connect a Yamaha product that has capability of the SCENE control signals, this unit can automatically activate the component and start playback. Refer to the instruction manual of the DVD player for further information. 1 Turn on the video monitor and then set the input source selector of the video monitor to this unit. Press SSCENE1 button. This unit is turned on. "DVD Viewing" appears in the front panel display, and this unit automatically optimize own status for the DVD playback. The default assigned SCENE templates Default SCENE button SCENE 1 The name of the SCENE template and its description DVD Viewing ­ input source: DVD ­ sound field program: Straight For when you want to listen to a music disc from the connected DVD player as the background music for this room. Disc Listening ­ input source: DVD ­ sound field program: 7ch Stereo For when you want to listen to a music disc from the connected DVD player as the background music for this room. TV Viewing *1 ­ input source: DTV/CBL ­ sound field program: Straight For when you want to watch a TV program. Radio Listening *2, *3, *4 ­ input source: TUNER ­ sound field program: 7ch Enhancer For when you want to listen to a music program from the FM radio station. 2 SCENE 2 SCENE 3 y The indicator on the selected SCENE button lights up while this unit is in the SCENE mode. SCENE 4 3 4 Start playback of the desired DVD on your player. Notes Rotate JVOLUME to adjust the volume. *1 You must connect a cable TV or a satellite tuner to this unit in advance. See page 22 for details. *2 You need to connect the supplied FM and AM antennas to this unit in advance. See page 27 for details. *3 You must tune into the desired radio station in advance. See pages 53 to 56 for tuning information. *4 To achieve the best possible reception, orient the connected AM loop antenna, or adjust the position of the end of the indoor FM antenna. y You can change the assigned SCENE template for the SCENE buttons. See page 37 for details.