Table of Contents Safety Rules Electrical Safety Installation Safety Cleaning Safety SPECIAL NOTES ON LCD MONITORS ..................................................................... 1 ..................................................................... 1 ..................................................................... 1 ..................................................................... 1 ..................................................................... 1 ..................................................................... 2 ..................................................................... 2 ..................................................................... 2 ..................................................................... 3 ..................................................................... 4 ..................................................................... 6 ..................................................................... 6 ..................................................................... 7 ..................................................................... 7 ..................................................................... 7 ..................................................................... 8 ..................................................................... 9 Components and Accessories Usage Installation Guide Adjustment of Display Operation Adjustment of Screen Attachment Plug and Play Power Saver Troubleshooting Technical Specifications Display Mode Safety Rules Electrical Safety Note: To ensure your safety and prolong the life of the product, read the following safety rules carefully when you use the product for the first time. DO NOT touch the inside of the display. Only authorized and qualified technicians are allowed to open the LCD display case. Only hold the plug, not the power cable, when you connect the plug to the receptacle. Make sure that your hands are dry without moisture. Don't expose your LCD display in the rain, water, or the environment with high temperature or humidity, such as kitchens, surroundings of a swimming pool, any place near flower vases, etc.) If your LCD display operates abnormally, especially if there is smoke, noise or smell, remove the plug immediately and contact our authorized dealer or service center. Installation Safety Don't touch your LCD display with your fingers or any hard objects to avoid scratching or leaving any oil sludge on the surface of the display Install your LCD display at the place where the risk of dust contamination is low. Take moisture-proof and ventilation measures to protect your LCD display. Don't install your LCD display near any heat source, such as kitchen tables, ovens, or fire sources, or in the sun. Install your LCD at the place where children will not touch it to avoid electric shock, or dropping. Secure your LCD firmly or explain the safety rules to children, if required. When installing your LCD display or adjusting its angle, attention shall be paid to the loading capability and leveling of the display. Cleaning Safety Don't spray or pour cleanser or water onto your LCD display or its case directly. When cleaning your LCD display, make sure that no liquid permeates into the inside of the LCD display or any accessory. Moisten a clean and soft lint-free cloth with water, ammonia-free water, or glass cleanser without alcohol, wrench it dry and wipe the surface of your LCD display gently. It is recommended to use a silk cloth that is exclusively used to clean the display. SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours. 1 Components and Accessories LCD Display D-Sub Signal Cable Quick Start Guide User's Manual (CD-ROM) Power Cable DVI Signal Cable (Optional) Usage Installation Guide Attention Note: Read the [Safety Rules] section carefully before starting the installation Before installing your LCD display, consider the following with reference to the space where the display is to be installed: To minimize the reflection of the display, protect your eyes and ensure premium quality, don't install your LCD display near windows or with backlight. Keep the display away from your eyes at least by 30 cm. The upper edge of the display should be a little higher than your sight. Adjust the front and back dip angles of the display based on your visual angle so that you can view the display comfortably. Quick Installation Complete the following steps for quick installation: (See the figure) Assemble the seat of the display Take the seat out of the box and place it on a flat table. Take your LCD display out of the carton and assemble the display and seat along the rail. You will hear a click sound when the display and seat are engaged correctly. 2 . Connection to PC Make sure that the power supply of your PC is turned off and the power plug is removed. Connect and fasten both ends of the signal cable to your PC host and LCD display respectively. Connect the attached power cable to your LCD display. Plug the power cable to the receptacle. Turn on the power supplies of your PC and LCD display. Transformer DC end DVI Signal Cable (Optional) D-Sub Signal Cable Adjustment of Display Key Definition 1 Power Source 2 3 4 5 Menu > < Auto OSD Menu Plus Minus Automatic Adjustment Power On/Off Green indication: Power is on and normal Orange indication: Sleep status in the energy-saving mode Colorless indication: Power off Press this button to enter OSD. Press it again to exit OSD. Press this button for selection or adjustment when OSD is started. Press this button to exit the manual when OSD is started. Press this button for the display to optimize the position, phase and clock pulse automatically when OSD is not started. 3 Operation for Analog Your LCD display has been adjusted to its optimal status before shipment. (See Page 9). Your can also adjust the image in accordance with the following illustrations and steps. Steps: 1. 2. 3. 4. 5. Click MENU to display the OSD window as shown in the following figure. Click < or > to select the function to be adjusted as shown in the following figure. Click the MENU to select the function to be adjusted. Click < or > to change current settings. To exit OSD, select " " to close the OSD window and save changes. To change other settings, repeat steps 2-4. Bright/Contract Adjustment Phase/Clock pulse Adjustment Horizontal/Vertical Adjustment Color Temp. Adjustment Language Selection OSD Setting Auto Adjustment Message Restore Exit (Analog) 4 Operation for Digital Your LCD display has been adjusted to its optimal status before shipment. (See Page 9). Your can also adjust the image in accordance with the following illustrations and steps. Steps: 1. 2. 3. 4. 5. Click MENU to display the OSD window as shown in the following figure. Click < or > to select the function to be adjusted as shown in the following figure. Click the MENU to select the function to be adjusted. Click < or > to change current settings. To exit OSD, select " " to close the OSD window and save changes. To change other settings, repeat steps 2-4. Bright/Contract Adjustment Phase/Clock pulse Adjustment Horizontal/Vertical Adjustment Color Temp. Adjustment Language Selection OSD Setting Input Selection Message Restore Exit (Digital) 5 Adjustment of Screen Function Definition Primary Secondary Directory Directory Symbol Symbol Secondary Directory Items Contrast Brightness Phase Clock Pulse Horizontal Description Adjust the contrast between the foreground and background of an image on the screen Adjust the background brightness of the screen Adjust the focus of the image (for analog input adjustment only) Adjust the clock pulse of the image (for analog input adjustment only) Move the image left and right on the screen (for analog input adjustment only) Move the image up and down on the screen (for analog input adjustment only) Vertical N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Warm Color Set up the color temp. to be warm white color Temp. Cold Color Set up the color temp. to be cold white color Temp. User Definition/Red User Adjust red/green/blue gain Definition/Green User Definition/Blue English Select the language you want Deutsch Français Español Italiano Horizontal Vertical OSD Time Display Auto Adjustment Move OSD left and right Move OSD up and down Adjust OSD time display settings Set up horizontal, vertical, sequence and focus automatically (for analog input only) N/A N/A Analog Digital Select the input source you want (for DVI Input only) N/A Message Display resolution, H/V frequency and the input port used for current input timing function Restore to factory settings Close the OSD window and save changes N/A N/A Restore Exit 6 Attachment Plug and Play The product provides the latest VESA plug and play function to prevent complicated and time-consuming installation procedures. The plug and play function allows your computer system to identify the LCD display easily and set up the functions of the LCD display automatically. The LCD display transfers the Extended Display Identification Data (EDID) to your computer system via the Display Data Channel (DDC), so that your computer can use the self-setting function of the LCD display. Power Saver The LCD display has a built-in Power Control System (Power Saver). When the LCD display is not operated during a certain time, the Power Control System will brings the LCD display into low voltage status automatically to save power. Move the mouse slightly or press any key to return to the normal operation. The Power Saver function can only be operated by the display card of the computer system. You can set up this function from your computer. The LCD display is compatible with EPAENERGY STAR NÜTEK when used with VESA DPMS. To save power and extend the life of the product, turn off the LCD display power supply when it is not used or when remaining idle for a long time. Troubleshooting Power LED does not light Check that the power switch is turned on. Make sure that the power cable is connected. Icon off Check that the power switch is turned on. Make that the power cable is connected. Ensure that the signal cable is inserted in the receptacle appropriately. The Power Saver may turn off the display automatically during the operation. Make sure that the display is restored when you press any key from the keyboard. Color Default Instability or Ripple Refer to "Color Temperature Adjustment" to adjust RGB color or select color temperatures. Remove the electronic equipment in the vicinity that may cause EMI interference. Check the signal cable of the display and ensure that no pin is bent. Image Offset or wrong Size Press the auto adjustment button to optimize the screen automatically. Set up the reference position. 7 Technical Specifications Panel Dimension Max. Resolution Max. Pixel LCD Panel (Back Light Source) Pixel Span Brightness Contrast LC Response Time Visual Angle Effective Display Signal Mode Input Signal SYNC Frequency Max. Pixel Clock Input Terminal Image Audio Operation Mode Power Saving Sleep Mode Power Saving OFF Mode Environmental Conditions Temperature Humidity Diagonal 484mm (19 inch) LCD display 1,440 x 900/ WXGA+ Up to 16.2M true color Horizontal 0.285mm x Vertical 0.285mm 300 cd/m2 500 : 1 8 ms Horizontal 150° / Vertical 130° Horizontal 410.4mm x Vertical 256.5mm Simulated video frequency: 0.7 Vpp, 75 (separate SYNC and composite SYNC) Horizontal 30kHz~82kHz x Vertical 56Hz ~76 Hz 135MHz D-Sub 15 PIN (VESA) / DVI-D (Optional) Phone Jack, d=3.5mm (Optional) AC100~240Volts, 50/60Hz 60W 2W @230VAC 50Hz 1W @230VAC 50Hz 5 ~ 35 (operation)/ -20 ~ 55 (storage) 20% ~ 80% (operation)/ 20% ~ 85% (storage) 448.5 mm x 182mm x 369.5mm 4.4 kg TCO99;UL/CUL;TÜV-GS;CE/LVD;TÜV-ERGO;CB;CCC;FCC-B; VCCI-B;CE/EMC;C-Tick; BSMI; ISO 13406-2;EPA; PCT; NOM Power Transformer Power Consumption Actual Dimension (W x D x H) Net Weight Safety Standard Lamp Disposal LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations. Cet appareil numérique de la class B respecte toures les exigencies du Réglement sur le materiel brouilieur du Canada. 8 Display Mode If the signal of your PC system is the same as one of the following reference signal modes, the screen will be adjusted automatically. If not, the screen will not display or only the LED lights will display. For more information about the adjustment mode, refer to the instructions of your display card. Hor. Display Mode Frequency (kHz) Vert. Frequency (Hz) 59.940 72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.020 75.025 59.870 55.887 70.087 66.667 74.500 74.720 Pixel Frequency (MHz) 25.175 31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 108.000 108.000 135.000 79.500 106.5 28.322 30.240 57.283 80.000 -/-/-/+/+ +/+ +/+ +/+ -/-/+/+ +/+ +/+ +/+ -/+ -/+ -/+ -/-/-/SYNC Polarity (H/V) VESA VGA 640x480 31.469 37.861 37.500 SVGA 800x600 35.156 37.879 48.077 46.875 XGA 1024x768 48.363 56.476 60.023 SXGA 1152x864 SXGA 1280x1024 67.500 63.981 79.976 WXGA 1280x768 WXGA 1440x900 VGA TEXT Macintosh 720 x 400 640x480 832 x 624 1024 x 768 47.776 55.935 31.469 35.000 49.725 60.150 9