.com COMPONENT Additional Technical Manual System board D1215 / D1214 Are there ... ... any technical problems or other questions you need clarified? Please contact: · Our Hotline: Mo-Fr: 8 a.m. - 6 p.m. Sat: 9 a.m. - 2 p.m. Tel.: ++49 (0) 180 3777 005 · your sales outlet The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.com/mainboard Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1215-Z181-1-7619 Printed in the Federal Republic of Germany AG 0102 01/02 A26361-D1215-Z181-1-7619 System Board D1215/D1214 Additional Technical Manual January 2002 edition Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. Magic Packet is a registered trademark of Advanced Micro Devices, Inc. Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2002 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. Contents Introduction........................................................................................................................................1 Features ............................................................................................................................................2 Mechanics .........................................................................................................................................3 Connectors ................................................................................................................................5 Power supply monitoring....................................................................................................5 Intrusion connector for case open detect for optional push-button (opener) .......................5 Serial port 2 (COM 2).........................................................................................................6 Front panel connector ........................................................................................................7 Fan 2 connector.................................................................................................................8 Wake On LAN (WOL) connector ........................................................................................8 USB port C / D 1 - Dual channel ........................................................................................8 CD-ROM audio connector (internal) ...................................................................................9 Auxiliary (MPEG, TV) audio connector (internal)................................................................9 Fan 1 connector.................................................................................................................9 Configuration ...........................................................................................................................10 Functions controlled by the configuration switch ..............................................................10 Power ......................................................................................................................................10 Power requirement...........................................................................................................10 Power loadability..............................................................................................................10 Documentation ................................................................................................................................11 Installing drivers...............................................................................................................................11 Upgrading main memory..................................................................................................................11 Troubleshooting...............................................................................................................................12 Message BIOS update.............................................................................................................12 The screen stays blank............................................................................................................12 A26361-D1215-Z181-1-7619 Introduction i Depending on the configuration of your system board, some of the hardware components described may not be available. You may find further information e. g. in the complete Technical Manual for the system board and in the description "BIOS Setup". Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers & Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers". The latest BIOS version or drivers can be found on the internet under http://www.fujitsu-siemens.com/en/service. ! Computer system boards and components contain very delicate IC chips. To protect them against damage caused by static electricity, you must follow these precautions: · · · Use a grounded wrist strap. Unplug your computer before you remove any part of the casing. Place the system board and the components on a grounded antistatic pad whenever you remove them from the computer. Hold components by the edge, do not touch any pins or connectors on them. Once you have installed the system board, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring). A26361-D1215-Z181-1-7619 English - 1 Features Features The table shows two assembly versions of this system board as example. Features Chipset Board Size VGA onboard (Intel 815E) Audio onboard (AC '97) LAN onboard / with Alert-on-LAN Thermal Management onboard System Monitoring onboard Fujitsu Siemens Keyboard Power Button Support Buzzer onboard / int. Speaker Support Internal Connectors DIMM Sockets (SDRAM) AGP Slot (1/2/4x, 32Bit, 66 MHz) PCI Slots (32Bit, 33 MHz, 5 V and 3.3 V) ISA Slot ACR Slot AMR Slot IDE Interfaces (Ultra DMA/100) Floppy Interface (up to 2.88 MB) CD / AUX Audio Input Wake-on-LAN Int. Serial Port / with SmartCard Support USB Connectors int. / shared with CNR External Connectors VGA Audio Mic. / in / out (2 x 0.5 W / 8 W) Game/MIDI LAN (RJ-45) PS/2 Mouse/Keyboard Ext. Serial Port (FIFO, 16550 compatible) Parallel Port (EPP/ECP) USB Connectors external 1 1 1 1 1 1 1 2 2 1 3 2 1 1/1 1 1/ü 2/1 1 1 1 1 1 1 2 2 1 3 2 1 1/1 1 1/ü 2/m-ATX ü ü ü/ü/D1214-A D1215-A Intel 815E m-ATX ü ü ü/ü ü ü ü -/ü D1214-A D1215-A 2 - English A26361-D1215-Z181-1-7619 Mechanics Mechanics Layout mATX 9.6" x 8'' (243.84 mm x 203.2 mm) Some of the following connectors are optional and may therefore not be included on your system board. 1 3 5 8 2 4 6 7 9a9b9c 1= 2= 3= 4= 5= 6= PS/2 mouse port PS/2 keyboard port LAN port USB ports A and B Parallel port Serial port 1 7 = VGA port 8 = Game/Midi port 9a = Audio Line-Out Headphones 9b = Audio Line-In 9c = Audio Micro-In The components and connectors marked are not necessarily present on the system board. A26361-D1215-Z181-1-7619 English - 3 Mechanics 1 2 3 4 5 6 78 14 13 DIMM 2 DIMM 1 9 AGP / GPA PCI 1 12 11 10 1= 2= 3= 4= 5= 6= 7= Power supply Serial port 2 Floppy disk drive IDE drives 3 and 4 (secondary) IDE drives 1 and 2 (primary) Connector for control panel Fan 2 (e. g. for the system fan supervised) * 8 = Wake On LAN 9 = USB ports C / D 10 = CD audio input 11 = AUX audio input 12 = Fan 1 (e. g. for the processor) 13 = Power supply monitoring 14 = Cover monitoring The components and connectors marked are not necessarily present on the system board. *) only for speed controllable fans (3 pin connector), for 2 pin processor fans use Fan2 connector only. 4 - English PCI 2 PCI 3 A26361-D1215-Z181-1-7619 Mechanics Connectors ! Some of the following connectors are optional! Power supply monitoring 1 Pin 1 2 3 4 5 6 7 8 Signal Monitor on PS FAN control (low asserted) PS FAN full on (low asserted) PS FAN pulse SMB CLK SMB DATA VCC EEPROM GND Intrusion connector for case open detect for optional push-button (opener) 1 Pin 1 2 3 Signal GND Case open (low asserted) Intrusion switch present (low asserted) A26361-D1215-Z181-1-7619 English - 5 Mechanics Serial port 2 (COM 2) external via optional cable 2 1 Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 272) 29 Signal Sleep LED (Cathode) Sleep LED (Anode) Key PowerON_LED (Anode) PowerON_LED (Anode) PowerON_LED (Cathode) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) Sleep button (low asserted) Reset button (low asserted) Pin 2 4 6 81) 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC or GND Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 1) Pin 8 is connected to VCC if audio is not onboard. Pin 8 is connected to GND if audio is onboard. 2) The sleep button (optional) functions only for operating systems with APM (not with ACPI). 6 - English A26361-D1215-Z181-1-7619 Mechanics Front panel connector Power On/Off Reset 1) Message LED 1) 1) 1) 3) HD-LED Power On LED 1 2 1) Sleep 1) 2) 2) SCSI LED Input Speaker 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 272) 29 Signal Sleep LED (Cathode) Sleep LED (Anode) Key PowerON_LED (Anode) PowerON_LED (Anode) PowerON_LED (Cathode) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) reserved Reset button (low asserted) Pin 2 4 6 81) 10 12 14 16 18 20 22 24 26 28 30 Signal Not connected Key GND VCC or GND Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 1) Pin 8 is connected to VCC if audio is not onboard. Pin 8 is connected to GND if audio is onboard. 2) The sleep button (optional) functions only for operating systems with APM (not with ACPI). ! Do not connect an internal speaker if a buzzer is onboard. A26361-D1215-Z181-1-7619 English - 7 Mechanics Fan 2 connector (system fan - supervised) Pin 1 2 3 Signal GND +12 V Fan sense 1 Wake On LAN (WOL) connector 1 Pin 1 2 3 Signal VCC Auxiliary GND Wake pulse (high asserted) USB port C / D 1 - Dual channel (internal or external via special wire) 7 1 14 17 12 Pin 1 Signal VCC Dual / VCC (fused max. 500mA and power supervision with over current detection) Data negative (port C) Data positive (port C) GND Shield GND Pin 7 Signal Shield GND Pin 13 Signal Key 2 3 4 5 8 9 10 11 GND Data positive (port D) Data negative (port D) VCC Dual / VCC (fused max. 500mA and power supervision with over current detection) Power supply on (CCR on) (max. 1 second low pulse) 14 15 16 17 GND Data positive (port C) Data negative (port C) VCC Dual (fused max. 500mA and power supervision with over current detection) Key 6 Key 12 18 8 - English A26361-D1215-Z181-1-7619 Mechanics CD-ROM audio connector (internal) 1 Pin 1 2 3 4 Signal Left CD audio input CD GND CD GND Right CD audio input Auxiliary (MPEG, TV) audio connector (internal) 1 Pin 1 2 3 4 Signal Left AUX audio input Analog GND Analog GND Right AUX audio input Fan 1 connector 1 Pin 1 2 3 Signal GND Controlled fan voltage (0 V / 6...12 V) Fan sense A26361-D1215-Z181-1-7619 English - 9 Mechanics Configuration Functions controlled by the configuration switch Function Password skip Off Recovery BIOS Off Floppy write protect Off Low auxiliary power supply (<2 A) High auxiliary power supply SKP on off X X X X X X RCV X X on off X X X X FWP X X X X on off X X PSS X X X X X X on off PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered wake devices (WakeOnLAN, USB, PCI) in S3-S4 ...