User manual FUJITSU SIEMENS SCENIC T (I815) - annexe 2

SYSTEM BOARD D1188 ADDITIONAL TECHNICAL MANUAL Is there ... ... any technical problem or other question you need clarified? Please contact: · Our Hotline: Mo-Fr: 8 a.m. - 6 p.m. Sat: 9 a.m. - 2 p.m. Tel.: ++49 (0) 180 3777 005 · your sales outlet The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.com/mainboard Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1188-Z180-1-7619 Printed in the Federal Republic of Germany AG 0600 06/00 A26361-D1188-Z180-1-7619 System Board D1188 Additional Technical Manual June 2000 edition Intel, Pentium and Celeron are registered trademarks and MMX and OverDrive are trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 is a registered trademark of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2000 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. Contents Introduction........................................................................................................................................1 Features ............................................................................................................................................2 Mechanics .........................................................................................................................................3 Connectors ................................................................................................................................5 Serial port 2 (COM 2).........................................................................................................5 Front panel connector........................................................................................................6 Fan 2 connector.................................................................................................................7 Wake On LAN (WOL) connector........................................................................................7 CD-ROM audio connector (internal)...................................................................................7 Auxiliary (MPEG, TV) audio connector (internal)................................................................8 Fan 1 connector.................................................................................................................8 Configuration .............................................................................................................................9 Functions controlled by the configuration switch ................................................................9 Power ........................................................................................................................................9 Power requirement ............................................................................................................9 Power loadability................................................................................................................9 Documentation ..................................................................................................................................9 Installing drivers .............................................................................................................................. 10 Upgrading main memory ................................................................................................................. 11 Troubleshooting............................................................................................................................... 11 Message BIOS update............................................................................................................. 11 The screen stays blank............................................................................................................ 11 A26361-D1188-Z180-1-7619 Introduction i This system board is available in different configuration levels. Depending on the hardware configuration of your device, it may be that you cannot find several options in your version of the system board, even though they are described. You may find further information e. g. in the complete Technical Manual for the system board and in the description "BIOS Setup". Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers & Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers". The latest BIOS version or drivers can be found on the internet under http://www.fujitsusiemens.com/en/service. A26361-D1188-Z180-1-7619 English - 1 Features Features The table shows the assembly version of this system board. Function Processor socket Processor Formfactor Front Side Bus in MHz Chipset Memory sockets ISA slots PCI slots ISA/PCI shared AGP Port AMR Port System monitoring Thermal Management Wake On LAN Chipcard reader Save to Disk (ACPI S4) Save to RAM(ACPI S3) LAN onboard Audio onboard VGA onboard 133 MHz Display Cache Version D1188-A1X PGA 370 Intel Celeron or Pentium III ATX 66/100/133 815 2 DIMM -3 -1 ---x -x x x AD1881A i 815 -- ! Computer system boards and components contain very delicate IC chips. To protect them against damage caused from electric static, you have to follow some precautions: · · · Unplug your computer when you work inside. Hold components by the edge, don't touch their leads. Use a grounded wrist strap. Place the system board and the components on a grounded antistatic pad whenever you work outside the computer. Once you have installed the system board, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring). 2 - English A26361-D1188-Z180-1-7619 Mechanics Mechanics Layout µ-ATX 9,6" x 8'' (243,84 mm x 203,2 mm) Some of the following connectors are optional and may therefore not be included on your system board. DIMM 2 DIMM 1 AGP PCI 1 1 3 5 6 7 8 2 4 9a 9b9c 1= 2= 3= 4= PS/2 mouse port PS/2 keyboard port USB port 2 USB port 1 5 = Serial port 1 6 = Parallel port 7 = VGA port 8 = Game/Midi port 9a = Audio Line-Out 9b = Audio Line-In 9c = Audio Micro-In PCI 2 PCI 3 A26361-D1188-Z180-1-7619 English - 3 Mechanics 1 23 4 5 6 7 DIMM 2 DIMM 1 13 12 AGP 8 9 PCI 1 PCI 2 PCI 3 11 1= 2= 3= 4= 5= 6= Serial port 2 Power supply IDE drives 3 and 4 (secondary) Floppy disk drive IDE drives 1 and 2 (primary) Front panel connector (power switch, LED, loudspeaker) 7 = Configuration switch 10 8 = Fan 2 (e. g. for the processor) 9 = Wake On LAN 10 = CD audio input 11 = AUX Audio Input 12 = Fan 1 (e. g. for the processor) 13 = Voltage indicator LED The components and connectors marked do not have to be present on the system board. 4 - English A26361-D1188-Z180-1-7619 Mechanics Connectors ! Some of the following connectors are optional! Serial port 2 (COM 2) external via optional cable 2 1 Pin 1 3 5 7 9 11 13 15 Signal DCD 2 SIN 2 SOUT 2 DTR 2 GND Not connected RESET (high asserted) GND Pin 2 4 6 8 10 12 14 16 Signal DSR 2 RTS 2 CTS 2 PC_On_Strobe VCC Auxiliary VCC GND Key A26361-D1188-Z180-1-7619 English - 5 Mechanics Front panel connector Power On/Off Reset 1) Message LED 1) 1) 1) 3) HD-LED Power On LED 1 2 1) Sleep SCSI LED Input 1) 2) Speaker 2) 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 272) 29 Signal Not connected Standby LED (Anode) Key PON_LED (Anode) PON_LED (Anode) PON_LED (Cathode/GND) Standby LED (Cathode/GND) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) Sleep button (low asserted) Reset button (low asserted) Pin 2 4 6 81) 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC or GND Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 1) Pin 8 is connected to VCC if audio is not onboard. Pin 8 is connected to GND if audio is onboard. 2) The sleep button (optional) functions only for operating systems with APM (not with ACPI). 6 - English A26361-D1188-Z180-1-7619 Mechanics Fan 2 connector 1 Pin 1 2 3 Signal GND +12 V Fan sense Wake On LAN (WOL) connector 1 Pin 1 2 3 Signal VCC Auxiliary GND Wake pulse (high asserted) CD-ROM audio connector (internal) 1 Pin 1 2 3 4 Signal Left CD audio input CD GND CD GND Right CD audio input A26361-D1188-Z180-1-7619 English - 7 Mechanics Auxiliary (MPEG, TV) audio connector (internal) 1 Pin 1 2 3 4 Signal Left AUX audio input Analog GND Analog GND Right AUX audio input Fan 1 connector 1 Pin 1 2 3 Signal GND Controlled fan voltage (0 V / 6...12 V) Fan sense 8 - English A26361-D1188-Z180-1-7619 Documentation Configuration Functions controlled by the configuration switch Function Password skip Off Recovery BIOS Off Floppy write protect Off RTC - Reset and Clear CMOS Off *) Must be in "off" state. SKP on off X X X X X X RCV X X on off X X X X FWP X X X X on off X X RES* X X X X X X on off Power Power requirement Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage +5.0 V +12 V -12 V +3.3 V +5.0 V Maximum variation ±5 % ±10 % ±10 % ±5 % ±5 % Maximum current 15 A 350 mA 150 mA 4A 2A Comment Power loadability Fuse number 1 Maximum fuse current 750 mA Function Keyboard port Mouse port Game port VGA connector Universal serial bus (USB) Port A Universal serial bus (USB) Port B Maximum function current Not specified Not specified Not specified Minimum 50 mA 500 mA 500 mA 2 3 750 mA 750 mA Documentation Ê Ê Insert the "Drivers & Utilities" CD. If the CD does not start automatically, run the START.EXE file in the main directory of the CD. A26361-D1188-Z180-1-7619 English - 9 Installing drivers Ê Ê Ê Ê Select your system board or your device. Select Documentation. Select - Technical Manuals Select - Technical Manuals (BIOS) i You may have to install the Acrobat Reader - Software on the CD-ROM (path: utls/acrobat) before reading! For more details please read the according readme.txt files. Installing drivers Ê Ê Ê Insert the "Drivers & Utilities" CD. If the CD doesn't start automatically call the START.EXE file in the main directory of the CD. If the system board list is displayed select the system board or select under Driver the operating system used and the audio and video drivers. 10 - English A26361-D1188-Z180-1-7619 Upgrading main memory Upgrading main memory Support: Size: Technology: The system needs at least one module and can manage at most two SDRAM modules. From 32 Mbytes up to 512 Mbytes SDRAM PC100 or PC133 unbuffered DIMM modules. 168 pin, 3.3 V, 64 bit, 72 bit (with ECC), SDRAM 2 M, 4 M, 8 M, 16 M and 32 M x 64 bit 2 M, 4 M, 8 M, 16 M and 32 M x 72 bit For one socket 16, 32, 64, 128 or 256 Mbyte SDRAM modules with ECC can be plugged in but ECC is not functioning. Mix of ECC modules with non ECC modules is possible. Support for up to 3 single sided or 2 double sided DIMM modules. Granularity: Troubleshooting Message BIOS update The System BIOS provides optimum support for the processor you have chosen. If the message BIOS update for installed CPU failed appears the microcode required for the processor inserted must still be loaded. Further information on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided. The screen stays blank If your screen stays blank this may have the following cause: The wrong RAM memory module has been inserted Ê See the chapter "Main Memory" for information which memory modules can be used. ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft. If you have any problems with ACPI please ensure that all of your components are supporting ACPI S3 and S4. - - Operating system Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers). For further information please refer to http://developer.intel.com/technology/iapc/involve.htm . A26361-D1188-Z180-1-7619 English - 11