Detailed instructions for use are in the User's Guide.
Card for IPDS and SCS/TNe
IPDS Emulation User's Guide
Printers
· · · · · · Lexmark C770, C772 Lexmark C780, C782 Lexmark C920 Lexmark C935 Lexmark T640, T642, T644 Lexmark W840
Multifunction Products
· · · · · Lexmark X644e MFP, X646e MFP Lexmark X646ef MFP Lexmark X782e MFP Lexmark X850e MFP, X852e MFP, X854e MFP Lexmark X940e MFP, X945e MFP
2nd edition, October 2007, E.C. 20G429
© Copyright Lexmark International, Inc., 2007 All rights reserved. © Copyright Intermate A/S, 2007
Notice......................................................................
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. AND INTERMATE A/S PROVIDE THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
Trademarks and Credits
AFP, AIX, AS/400, IBM, iSeries, MVS, OS/2, OS/390, OS/400, Print Services Facility, PSF, System/390, zSeries, and z/OS are trademarks of International Business Machines Corporation in the United States, other countries, or both. InfoPrint, Infoprint, Intelligent Printer Data Stream, IPDS, Bar Code Object Content Architecture and BCOCA are trademarks or registered trademarks of Ricoh Co., Ltd. in the United States, other countries, or both. Lexmark and Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc. registered in the United States and/or other countries. Intermate is a trademark of Intermate A/S. PCL is a registered trademark of the Hewlett-Packard Company. PostScript is a registered trademark of Adobe Systems Incorporated. Barcode Engine for Data Matrix, MaxiCode, and QR Code by TEC-IT Datenverarbeitung GmbH, www.tec-it.com. This product is based in part on the work of the Free Type Project. Other trademarks are the property of their respective owners.
2
Table of Contents
Notice...................................................................... ........................................................... 2 Trademarks and Credits ....................................................................................................................... 2 Table of Contents ................................................................................................................................... 3 1 1.1 1.2 1.3 1.4 2 Introduction............................................................................................................................... 8 About This Guide........................................................................................................................ 8 Equipment Requirements and Specifications for IPDS Emulation Printing............................... 8 Customer Support ....................................................................................................................... 9 Conventions Used in the Manual .............................................................................................. 10 Using the Operator Panel or Touch Screen for IPDS MENU Setup.................................. 11 2.1 IPDS MENU Setup Options vs. Printer Setup Options ............................................................ 11 2.2 Changing IPDS Settings Using the Operator Panel .................................................................. 12 2.2.1 Accessing the IPDS MENU.................................................................................................... 12 2.2.2 Example: Selecting a New Value as a Setting........................................................................ 12 2.2.3 Example: Changing a Numerical Setting............................................................................... 14 2.2.4 Saved Option Changes Become Active on New Session ........................................................ 15 2.2.5 Printing the Menu Settings Page (printers) ........................................................................... 15 2.3 Changing IPDS Settings Using the MFP Touch Screen ........................................................... 16 2.3.1 Accessing the IPDS MENU.................................................................................................... 16 2.3.2 Example: Selecting a New Value as a Setting........................................................................ 16 2.3.3 Example: Changing a Numerical Setting............................................................................... 17 2.3.4 Saved Option Changes Become Active on New Session ........................................................ 17 2.3.5 Printing the Menu Settings Page (MFPs) .............................................................................. 18 3 Setup Operations Reference................................................................................................... 19 3.1 IPDS MENU - Map of All Options........................................................................................... 19 3.2 Overview of EMULATION Menu Options and Values ........................................................... 20 3.3 EMULATION Â Options Descriptions ..................................................................................... 22 3.3.1 IPDS Emulation ..................................................................................................................... 22 3.3.2 Host Resolution ...................................................................................................................... 22 3.3.3 Color Processing ................................................................................................................... 23 3.3.4 Text Processing ...................................................................................................................... 23 3.3.5 Toner Saver ............................................................................................................................ 23 3.3.6 BAR CODE ............................................................................................................................ 23 3.3.6.1 Bar Code Symbol ................................................................................................................ 23 3.3.6.2 Bar Code Size...................................................................................................................... 24 3.3.7 DEFAULT CODEPAGE ........................................................................................................ 24 3.3.8 Codepage Version .................................................................................................................. 25 3.3.9 DEFAULT FGID.................................................................................................................... 25 3.3.10 Default CPI ............................................................................................................................ 25 3.3.11 Page Counter ......................................................................................................................... 25 3.3.12 Printable Area........................................................................................................................ 26 3.3.13 Exception Control .................................................................................................................. 27 3
3.3.14 Font Control........................................................................................................................... 27 3.3.15 Font Type ............................................................................................................................... 27 3.3.16 IPDS Print Res ....................................................................................................................... 28 3.3.17 Intervention Required ............................................................................................................ 28 3.3.18 IPDS Timeout......................................................................................................................... 29 3.3.19 Print IPDS Fonts.................................................................................................................... 30 3.3.20 Trace Functions ..................................................................................................................... 31 3.3.21 IPDS Version ......................................................................................................................... 31 3.4 Overview of PAPER HANDLING Menu Options and Values ................................................ 32 3.5 PAPER HANDLING Menu  Option Descriptions.................................................................. 33 3.5.1 IPDS Blank Pages.................................................................................................................. 33 3.5.2 Offset Stacking ....................................................................................................................... 33 3.5.3 UNIVERSAL SIZE.................................................................................................................. 33 3.5.4 OTHER ENV SIZE ................................................................................................................. 34 3.6 MAP INPUT TRAYS Menu Options ....................................................................................... 37 3.7 MAP OUTPUT BINS Menu Options ....................................................................................... 40 3.7.1 Descriptions of Output Bin Values......................................................................................... 40 3.7.2 Descriptions of IPDS Bin Selection Numbers ........................................................................ 41 3.7.3 Default Bin Mapping.............................................................................................................. 41 3.8 MARGINS Menu Options ........................................................................................................ 42 3.8.1 ALL INPUT TRAYS Menu...................................................................................................... 44 3.8.2 TRAY 1 ADJUST Menu .......................................................................................................... 44 3.8.3 TRAY 2 ADJUST Menu .......................................................................................................... 45 3.8.4 TRAY 3 ADJUST Menu .......................................................................................................... 45 3.8.5 TRAY 4 ADJUST Menu .......................................................................................................... 45 3.8.6 TRAY 5 ADJUST Menu .......................................................................................................... 46 3.8.7 MP FEEDER ADJUST Menu ................................................................................................ 46 3.8.8 ENV FEEDER ADJ Menu...................................................................................................... 46 3.8.9 MANUAL PAPER ADJ Menu ................................................................................................ 47 3.8.10 MANUAL ENV ADJ Menu ..................................................................................................... 47 3.9 Overview of the FONT CAPTURE Menu Options .................................................................. 48 3.10 FONT CAPTURE Menu Options ............................................................................................. 49 3.10.1 Capture Fonts ........................................................................................................................ 49 3.10.2 Remove Fonts......................................................................................................................... 49 4 5 Duplex Printing Using Preprinted Media ............................................................................. 50 Finishing Support.................................................................................................................... 51 5.1 Offset Stacking.......................................................................................................................... 53 5.1.1 AS/400 and iSeries Offset Stacking ........................................................................................ 53 5.1.2 Mainf ...
