.com COMPONENT Technisches Handbuch / Technical Manual Systembaugruppe / Systemboard D1215 Are there ... ... any technical problems or other questions which you would like to be clarified? · · Please contact: your sales partner your sales outlet Further information can be found in the "Safety, Warranty and Ergonomics" booklet. The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com Are there ... ... any technical problem or other question you need clarified? Please contact: · your sales partner · your sales outlet You will find further information in the manual "Safety, Warranty and Ergonomics". The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.com Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1215-Z120-1-7419 Printed in the Federal Republic of Germany AG 0102 01/02 A26361-D1215-Z120-1-7419 German English Systembaugruppe D1215 System Board D1215 Technisches Handbuch Technical Manual Ausgabe Januar 2002 January 2002 edition Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2002 All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. This manual was produced by cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. This manual was produced by cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................1 Important notes..................................................................................................................................1 Information about boards ...........................................................................................................2 Features ............................................................................................................................................3 External ports ............................................................................................................................5 Internal ports and connectors ....................................................................................................6 Temperature / System monitoring..............................................................................................7 Hard disk connection .................................................................................................................8 LAN connector...........................................................................................................................8 Screen resolution.......................................................................................................................9 PCI bus interrupts ......................................................................................................................9 Settings with switches and jumpers .................................................................................................10 Recovering System BIOS - switch 2 ........................................................................................10 Write protection for floppy disks - switch 3 ...............................................................................10 Add-on modules ..............................................................................................................................11 Installing and removing processors..........................................................................................12 Upgrading main memory..........................................................................................................13 Upgrading an AGP screen controller or the GPA memory .......................................................14 Installing network board with WOL...........................................................................................14 Replacing the lithium battery....................................................................................................15 Glossary ..........................................................................................................................................16 A26361-D1215-Z120-6-7419 Introduction i Depending on the configuration chosen, some of the hardware components described may not be available on your system board. You will find further information in the "BIOS Setup" description. Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD. Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! i Ê Ë Ú Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. Supplementary information, remarks, and tips follow this symbol. Text which follows this symbol describes activities that must be performed in the order shown. This symbol indicates that you must enter a blank space (press the Space Bar) at this point. This symbol indicates that you must press the Enter key. Text in this typeface indicates screen outputs. Text in this bold typeface indicates the entries you make via the keyboard. Text in italics indicates commands or menu items. "Quotation marks" indicate names of chapters or terms. Important notes Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it. ! Be sure to read this page carefully and note the information before you open the device. You cannot access the system board components without first opening the device. How to dismantle and reassemble the device is described in the Operating Manual accompanying the device. Please observe the safety information provided in the "Important notes" chapter in the device's operating manual. Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore essential to observe the instructions in the "Add-on modules" - "Replacing the lithium battery" section. A26361-D1215-Z120-6-7419 English - 1 Important notes The shipped version of this board complies with the requirements of the EEC directive 89/336/EEC "Electromagnetic compatibility". Compliance was tested in a typical PC configuration. When installing the board, refer to the specific installation information in the Operating Manual or Technical Manual for the receiving device. Connecting cables for peripherals must be adequately shielded to avoid interference. ! i Components can become very hot during operation. Ensure you do not touch components when making extensions to the system board. There is a danger of burns! The warranty is invalidated if the device is damaged during the installation or replacement of system expansions. Information on which system expansions you can use is available from your sales outlet or the customer service centre. Information about boards To prevent damage to the system board or the components and conductors on it, please take great care when you insert or remove boards. Take great care to ensure that extension boards are slotted in straight, without damaging components or conductors on the system board, or any other components, for example EMI spring contacts. Be especially careful with the locking mechanisms (catches, centring pins etc.) when you replace the system board or components on it, for example memory modules or processors. Never use sharp objects (screwdrivers) for leverage. Boards with electrostatic sensitive devices (ESD) are identifiable by the label shown. When you handle boards fitted with ESDs, you must, under all circumstances, observe the following points: · · · · · You must always discharge static build up (e.g. by touching a grounded object) before working. The equipment and tools you use must be free of static charges. Remove the power plug from the mains supply before inserting or removing boards containing ESDs. Always hold boards with ESDs by their edges. Never touch pins or conductors on boards fitted with ESDs. 2 - English A26361-D1215-Z120-6-7419 Features Features The components and connectors marked are not necessarily present on the system board. · · System board in m-ATX format PGA 370 Celeron processor with 66 /100 MHz Front Side Bus for PGA 370 socket and Pentium III with 100 / 133 MHz Front Side Bus for PGA 370 socket. Celeron and Pentium III processors support MMX technology and Intel Streaming SIMD Extensions. The size and frequency of first-level cache and second-level cache are dependent upon the processor used. · · · · Intel chipset 815 E consisting of GMCH 82815, ICH 82801BA Intel 82562EM LAN controller (10/100 Mbit/s) with RJ45 interface WOL with Magic Packetä is supported, remote LAN boot is also supported with Bootix LAN BootP or Intel PXE and Basic Alert On LAN II. Analogue Devices AD1885 AC'97 Audio Codec (AC1885) internal: Stereo CD-In, Stereo AUX-In external: Mono Micro-In, Stereo Line-In external: Game/Midi port, Stereo Line-Out / headphones Fujitsu Siemens system monitoring and temperature monitoring 2 DIMM slots for 32 to 512 Mbyte main memory (SDRAM memory modules meet the PC100/PC133 specification) without ECC Flash BIOS Power-on functions: Wake on RTC Wake on LAN Wake on PCI Cards Wake on USB APM and ACPI (requires an operating system that supports ACPI) Switching on/off, standby mode, suspend mode via on/off switch Switching on/off via software Chipcard reader interface (SmartCard reader) Processor serial number Cover monitoring: cover monitoring reports when the cover has been opened without authorisation. System, Setup and Keyboard password parallel and serial ports can be deactivated Floppy disk write-protection Boot hard disk virus warning function Flash BIOS and EEPROMs (on the memory modules) virus protection function. · · · · · Energy saving functions: - · Security functions: - A26361-D1215-Z120-6-7419 English - 3 Features · · 1 PCI slot or 3 PCI slots Up to three PCI slots are available, which support 3.3 V main and auxiliary voltages. AGP/GPA slot The AGP slot supports the 1x, 2x and 4x AGP mode and GPA memory boards. The voltage is detected and configured automatically. or GPA memory boards supported. · IDE hard disk controller connected to PCI bus for up to four IDE drives (e.g. IDE hard disk drives, ATAPI CD-ROM drives) The IDE hard disk controller are ATA33/66/100, ultra DMA capable and support PIO modes 04. Floppy disk drive controller (possible formats: 720 KB, 1.44 MB, 2.88 MB) The system board supports booting from a 120 MB IDE floppy disk drive. 2D/3D graphics processor, 24 bit 230 MHz RAMDAC GPA memory modules for enhanced 3D graphics performance is supported. Monitor connector: Sub D 1 external parallel port (ECP- and EPP-compatible) 1 external serial port (16C550 compat ...