User manual 3J USB-P1M

1. 1.1 Instruction Summary USB Memory Phone is a USB Memory Phone embedded with 64M memory drive. Once you plug it into your computer's USB port, the softphone stored in memory drive will auto run without any additional installation, login in the account stored automatically, then you can make VoIP calls by phone keypads, easy to make calls just as mobile phone. 1.2 Features 1. Built-in 64M bytes memory drive, memory can be updated to 128M bytes. 2. Auto run function under windows 2000 sp4 and XP. 3. Embedded in Softphone with account information. 4. Softphone and account information can be stored to be readable for end user. 5. Un-plug & close automatically without affecting PC system operation. 6. With LCD, keypad and ringer, easy to use like mobile phone. 7. Phone rings for all incoming calls, ring style and volume selectable. 8. Caller ID, echo cancellation, full duplex communication. 1 1.3 System Requirements 1. 2. 3. 4. 1. Windows 2000 sp4 or XP 400MHz processor and free USB1.1 or USB2.0 port 128MB RAM and 15MB free disk space Any broadband connection or minimum 33.6 Kbps dialup One USB Memory phone Suppose SkypeMate was embedded in the phone: 2.2 Run Skype Download Skype software and install it (www.skype.com). The version must be 1.0.0.106 or higher. Run Skype and log in with skype account. You can create a Skype account as shown below: 1.4 Package Contents 2. One user manual 2 Using the USB Memory Phone 2.1 Keypad Instruction IN/OUT: Press to scroll the caller or dialed number. / : Up/Down Scroll to the contacts. : Dial/Answer Dial out number or Answer a call. : Hang up End talking or refuse incoming call. C: Delete Key (1) Press to scroll the skype window at the idle state (2) Delete inputted wrong number while dialing. That indicates the Skype are successfully connected to Internet. If the icon is shown as connection. 3 , you have to check your Internet After software startup, the icon will appear to the system tray as shown below: 2 2.3 Connect USB Memory Phone to PC and Run SkypeMate When USB Memory Phone is connected to PC, SkypeMate software which was embedded in the phone will auto-run, then Skype program will pop up the window as shown below: That indicates the device and Skype are connected successfully. If the icon shown as (the phone is green and the outside is grey), please run Skype first. If the icon shown as (the phone is red and the outside is green), it means USB Memory Phone connected incorrectly. Please reconnect USB Memory Phone to PC. 2.4 Call another Skype user Add "bbc456" to Contacts Assign Speed-Dial for it, example "11" Select the first option "Allow this program to use Skype", click "OK" button. Note: If you selected the wrong option, you can make another selection. Please see 2.7. FAQ /problem3 for detail. After running SkypeMate, the icon will appear to the system tray as shown: Input number and call out: Press digital "11" on USB Memory Phone, this number will be shown on Skype window, then press 4 to call out. 5 2.5 Call to regular phone Press "00"+"country number"+"phone number", then press . . 12345678 -------------------destination number Example: call someone in Beijing, China, please press 00861012345678, and then press 0086 ---------------country code 10 ---------city code 2.8 FAQ Problem 1 There is no voice comes out when play music? Resolution Please execute the "Control Panel->Sound and Video ( ->Audio", set Sound Playback and Sound Recording's preference device to your sound card, it shown as below: ) Note: If you want to use this function, you should buy SkypeOut Credit from www.skype.com first. 2.6 Answer a call When a call comes in, the USB Memory Phone will ring. Press to answer the call, or press to refuse the call. Problem 2 The voice is played from the PC's sound card instead of the USB Memory Phone when I make/answer a call? Resolution Execute "Tools->Options->Sound Devices" to open the window as below: 6 7 Set "Audio In" and "Audio Out" to "USB Audio Device". Problem 3 Skype has been started, but the icon of SkypeMate still shown as Resolution Maybe you have selected the wrong option, you can execute "Tools-> Options-> Privacy-> Manage other programs' access to Skype", and then choose the needed option, click "Change" button to open the "Manage API Access Control" windows, and make another selection. (the phone is green and the outside is grey)? 2005-11-10 Ver.1.1 8