User manual 3M 1700 SERIES OVERHEAD PROJECTORS - ILLUSTRATED PARTS BREAKDOWN

(4/10/2005) 1700 Overhead Projector Illustrated Parts Breakdown Beige colored machines: 1706, 1707, 1710, 1715 Gray colored machines: 1711, 1720, 1730, 1740, 1745, 1760, 1765, 1780 3M Visual Systems Department 6801 River Place Boulevard Austin, Texas 78726-9000 www.3m.com/meetings OHP Service Documentation Resource Copyright © 2005. All Rights Reserved 78-6970-7536-0 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Revision History Original Issue date: 1998 The release date, revision level, pages changed and a description of the modifications are listed below. Revision Rev A Rev B Rev C Rev D Date 1998 4/2001 10/2001 5/2002 Page(s) Changed All pages All pages Figure 5, Pages 13-14 All pages Quick Ref Parts Index and Figure 1, Pages 5 and 6 Figure 11, Page 25 Rev F Rev G 4/2003 3/2005 Figure 3, Page 10 All pages Added new Roll Film Kit. Updated part numbers for items 3 and 10. Added new Arm/ Focus, Top Cover Assemblies. Updated kits, part nbrs, and Appendix information. Description First edition released. Added Gray machine references Top Cover individual parts combined. Updated part nbrs and assembly nbrs. Added rev history page. Added new Head Assemblies for Gray machines. Removed Head Assembly part nbrs for Beige machines. Rev E 9/2002 All rights reserved. No part of this book covered by the copyrights hereon may be reproduced or copied in any form or by any means-graphic, electronic, or mechanical, including photocopying, taping or information storage and retrieval systems-without written permission of 3M Visual Systems Department. © 3M 2005. All Rights Reserved. ii 3MTM Overhead Projector 1700 Series Table of Contents Illustrated Parts Breakdown INTRODUCTION ...................................................................................................................................................1 QUICK REFERENCE PARTS INDEX .............................................................................................................................2 SECTION 0. MACHINE OVERVIEW.............................................................................................................................3 SECTION 1. HEAD ASSEMBLY ..................................................................................................................................4 SECTION 2. ARM AND FOCUS ASSEMBLY (BEIGE COLOR) .........................................................................................6 SECTION 3. ARM AND FOCUS ASSEMBLY (GRAY COLOR) (SERIAL NUMBER 170006497 AND BELOW) .........................8 SECTION 4. ARM/FOCUS/POST ASSEMBLY (GRAY COLOR) (SERIAL NUMBER 170006498 AND ABOVE) .....................10 SECTION 5. POST ASSEMBLY ................................................................................................................................11 SECTION 6. TOP COVER ASSEMBLY (SERIAL NUMBER 170000988 AND BELOW)......................................................13 SECTION 7. TOP COVER ASSEMBLY (SERIAL NUMBER 170000989 AND ABOVE) ......................................................15 SECTION 8. BASE ENCLOSURE ..............................................................................................................................16 SECTION 9. CONTROL MODULE .............................................................................................................................18 SECTION 10. LAMP HOUSING (SINGLE) ..................................................................................................................20 SECTION 11. LAMP HOUSING (DUAL) .....................................................................................................................22 SECTION 12. COOLING FAN...................................................................................................................................24 SECTION 13. ACCESSORIES ..................................................................................................................................26 SECTION 14. WIRE JUMPERS ................................................................................................................................27 SECTION 15. HARDWARE KIT (NO PICTURE)..........................................................................................................29 APPENDIX A ­ 1700 SPECIFICATIONS .............................................................................................................30 © 3M 2005. All Rights Reserved. iii 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown This page is intentionally blank © 3M 2005. All Rights Reserved. iv 3MTM Overhead Projector 1700 Series INTRODUCTION Illustrated Parts Breakdown This Illustrated Parts Breakdown (IPB) Manual contains the information necessary to locate and identify assemblies, sub-assemblies, and specific parts of the 1700 Overhead Projector. Part Numbers All components available on a replacement basis are listed with their 3M identification number. The parts identification list opposite each illustration provides the description adequate to identify components. If the component is available only as part of the next higher assembly, the description column provides the next higher assembly description or identification number. Locating and Identifying a Part If physical appearance and general location of an item are known: 1. Use the IPB Section Titles to help determine which assembly or sub-assembly includes the item. 2. Refer to the view for the assembly or sub-assembly and locate the item on the exploded view. Match the part callout number to the corresponding number in the parts list. 3. Parts shown inside a dashed box can only be ordered as an assembly. Any part or mounting hardware shown outside the box is not included with the assembly. Machine Identification Plate The serial number plate for the 1700 is located on the inside wall of the projector. The Machine Identification Plate is divided into the following components: 1. Product Name: The specific version number of the projector. 2. Model Number/Alpha Code: The series number of the projector followed by a three or four character alpha code identifier. The Alpha Code indicates the design level, specific product characteristics, power cord or distribution specific to a country. 3. Lamp: The electrical rating of the lamp. 4. MFG Code: The MFG Code indicates the year and quarter the projector was built. (See the example to the right): 5. S/N: The serial number assigned to this projector. 1 2 5 4 3 MFG Code Letter E F H J K A C 1997 1998 1999 2000 2001 2004 2005 1 2 3 4 1 2 3 Digit Jan-Mar Apr-Jun Jul-Sep Oct-Dec Jan-Mar Apr-Jun Jul-Sep Ordering Parts When ordering parts, include the following information: 1. Machine model number and serial number. 2. Parts identification number. 3. Part description. 4. Quantity required. For U.S. retail customers: Call 1-800-650-8429, or fax 1-800-650-9268. Dealers: Refer to Dealers Guide. 3M Subsidiaries: Contact Export Operations. © 3M 2005. All Rights Reserved. 1 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Quick Reference Parts Index Description Blade, Fan Diode Kit, Inline Fresnel Lens, Dual-Element Fuse, 5 Amp, 5x20mm (Brazil only) Singlet Head Assembly (1720, 1760, 1765 Gray color) Doublet Head Assembly (1730, 1780 Gray color) Open Head Assembly (1711, 1740, 1745 Gray color) Lamp, Projection, ENX, 82V (Single) Lamp, Projection, ENX, 82V (Dual) Lamp, Projection, FXL, 82V (1745 and 1765) Motor, Fan, 120V Power Cord, 10 ft., 120V Resistor, 1.2 Ohm, 0.25 tab Socket, Single Lamp, ENX Socket, Dual Lamp, Black Thermostat, Safety (ENX) Top Cover Assembly, Single (Beige color) Top Cover Assembly, Dual (Beige color) Top Cover Assembly, Basic (Gray color) Top Cover Assembly, Lamp Changer (Gray color) Part Number 78-8054-1823-9 78-8054-1836-1 XO-0038-0820-1 26-1005-9599-5 78-8120-8554-2 78-8120-8555-9 78-8120-8556-7 78-8011-1186-1 78-8011-1186-1 78-8073-7100-6 78-8120-2914-4 78-8079-8822-1 78-8073-7127-9 78-8079-8820-5 78-8073-3017-6 78-8079-8872-6 78-8114-9027-1 78-8114-9021-4 78-8120-8572-4 78-8120-8573-2 Section No. 12 12 7 12 1 1 1 10 11 11 12 8 9, 10 10 11 10 6 6 7 7 Item No. 1 8A 3 3 8A 8B 9 3 4A 4B 7 4A 5A, 13 2 3 7 1A 1B 1A 1B IMPORTANT NOTICE 3M reserves the right to sell or furnish NEW OR RECONDITIONED PARTS. New and reconditioned parts are covered by the same 3M new parts limited warranty. © 3M 2005. All Rights Reserved. 2 3MTM Overhead Projector 1700 Series Section 0. Illustrated Parts Breakdown Machine Overview Head Assembly (See Section 1) Arm and Focus Assembly (See Sections 2, 3 and 4) Top Cover Assembly (See Sections 6 and 7) Control Module (See Section 9) Post Assembly (See Section 5) Base Enclosure (See Section 8) Lamp Housing (Single) (See Section 10) Lamp Housing (Dual) (See Section 11) Cooling Fan (See Section 12) Accessories (See Section 13) Wire Jumpers (See Section 14) Hardware Kit (See Section 15) © 3M 2005. All Rights Reserved. 3 3MTM Overhead Projector 1700 Series Section 1. Illustrated Parts Breakdown Head Assembly 1 2 Closed Head 5 8 4 1, 3 Open Head 10 6 11 7 9 NOTE: Screws, nuts, bolts, clips, and other small hardware are contained in the Hardware Kit: 78-8114-9023-0 (See Section 15). 3 © 3M 2005. All Rights Reserved. 4 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Head Assembly Parts List Item No. 1 2A 2B 2C 2D 3 4 5 6 7 8A 8B 9 10 11 3M Part Number 78-8114-8795-4 78-8120-2934-2 78-8120-2935-9 78-8120-8451-1 78-8120-8464-4 78-8014-8951-5 78-8114-8812-7 78-8120-3192-6 78-8120-2927-6 78-8120-3072-0 78-8120-8554-2 78-8120-8555-9 78-8120-8556-7 78-8120-8501-3 (Not available) Lens, Doublet Element Description Qty. 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Head Halves, Singlet (Beige color) Head Halves, Doublet (Beige color) Head Halves, Singlet (Gray color) Head Halves, Doublet (Gray color) Lens, Wide Angle, 293mm (Singlet Head only) Mirror Label, Head Lens, Head Bracket, Head Mount, Closed Singlet (Gray color only) Singlet Head Assembly (1720, 1760, 1765 Gray color) Doublet Head Assembly (1730, 1780 Gray color) Open Head Assembly (1711, 1740, 1745 Gray color) Open Singlet Mirror Assembly Housing, Lens, Split, Open Singlet © 3M 2005. All Rights Reserved. 5 3MTM Overhead Projector 1700 Series Section 2. Illustrated Parts Breakdown Arm and Focus Assembly (Beige color) 1 2 12 11 9 6 7, 8 10 4 3 See Section 5 5 NOTE: Screws, nuts, bolts, clips, and other small hardware are contained in the Hardware Kit: 78-8114-9023-0 (See Section 15). © 3M 2005. All Rights Reserved. 6 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Arm and Focus Assembly (Beige color) Parts List Item No. 1 2 3 4 5 6 7 8 9 10 11 12 3M Part Number 78-8114-8983-6 78-8073-3035-8 78-8120-2920-1 78-8120-2925-0 78-8064-1601-8 78-8073-3041-6 78-8079-8745-4 26(Not available) 78-8079-8747-0 78-8079-8743-9 78-8079-8744-7 26-1009-3653-8 Shim, Head Leveling Arm, Focus Plate, Standoff Pad, Wear Knob, Focus Cap, Focus Arm Gear, Focus Description Qty. 1 1 1 2 1 1 1 AR 1 1 1 1 Lubricant, Nye Rheolube 368 Bar, Pressure Clamp, Friction Rack, Focus Cap, Post © 3M 2005. All Rights Reserved. 7 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Section 3. Arm and Focus Assembly (Gray color) (Serial Number 170006497 and below) 1 9 8 10 2 3 7 5 4 6 See Section 5 NOTE: Screws, nuts, bolts, clips, and other small hardware are contained in the Hardware Kit: 78-8114-9023-0 (See Section 15). © 3M 2005. All Rights Reserved. 8 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Arm and Focus Assembly (Gray color) Parts List (Serial Number 170006497 and below) Item No. 1 2 3 4 5 6 7 8 9 10 3M Part Number 78-8114-8983-6 78-8120-3045-6 (Not Available) 78-8120-3069-6 78-8120-3047-2 78-8120-3048-0 78-8120-3046-4 78-8079-8744-7 26-1009-3653-8 78-8120-4017-4 Shim, Head Leveling Arm, Focus Spring, Leaf Pad, Rear Pad, Friction, Lower Knob, Gear, Focus Cap, Focus Arm Rack, Focus Cap, Post Pad, Friction. Upper Description Qty. 1 1 1 1 1 1 1 1 1 1 © 3M 2005. All Rights Reserved. 9 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Section 4. Arm/Focus/Post Assembly (Gray color) (Serial Number 170006498 and above) 1 NOTE: Screws, nuts, bolts, clips, and other small hardware are contained in the Hardware Kit: 78-8114-9023-0 (See Section 15). Parts List (Serial Number 170006498 and above) Item No. 1 3M Part Number XO-0038-0891-2 Focus Arm Kit Description Qty. 1 © 3M 2005. All Rights Reserved. 10 3MTM Overhead Projector 1700 Series Section 5. Illustrated Parts Breakdown Post Assembly 1 Fixed Post 4 2 3 5 6 Folding Post 7 8 11 NOTE: Screws, nuts, bolts, clips, and other small hardware are contained in the Hardware Kit: 78-8114-9023-0 (See Section 15). 10 9 © 3M 2005. All Rights Reserved. 11 3MTM Overhead Projector 1700 Series Post Assembly Parts List Item No. 1A 1B 2 3 4 5 6 7 8 9 10 11 Illustrated Parts Breakdown 3M Part Number (Not available) (Not available) 78-8079-8811-4 78-8096-5804-6 78-8079-8810-6 78-8079-8809-8 (Not available) (Not available) 78-8079-8852-8 78-8079-8875-9 78-8079-8850-2 78-8079-8846-0 Post (Beige color) Description Qty. 1 1 2 1 1 1 1 1 1 1 1 1 Post, Fixed, Offset Rack (Gray color) Bolt, Post Wrench Bracket, Backup Block, Post Post, Folding Spring, Compression Lock, Post Mount, Post, Pivot Bolt, Pivot Bracket, Pivot © 3M 2005. All Rights Reserved. 12 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Section 6. Top Cover Assembly (Serial Number 170000988 and below) 4 1 3 2 NOTE: Screws, nuts, bolts, clips, and other small hardware are contained in the Hardware Kit: 78-8114-9023-0 (See Section 15). © 3M 2005. All Rights Reserved. 13 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Top Cover Assembly Parts List (Serial Number 170000988 and below) Item No. 1A 1B 2 3 4 3M Part Number 78-8114-9027-1 78-8114-9021-4 (Reference only) 78-8120-2941-7 78-8064-1515-0 Description Top Cover Assembly, Single (Beige color) Top Cover Assembly, Dual (Beige color) Fresnel Lens (See note below) Bracket, Hinge Actuator Switch Qty. 1 1 1 1 1 NOTE: If the machine currently has a single-element fresnel lens and a new fresnel is needed, two options are available: 1. Replace the top cover with the appropriate assembly listed in Section 7. 2. Install Kit #78-8121-4740-9. This kit adapts single-element top covers to accept a dual-element fresnel lens. Refer to Technical Bulletin #10 for additional information. © 3M 2005. All Rights Reserved. 14 3MTM Overhead Projector 1700 Series Illustrated Parts Breakdown Section 7. Top Cover Assembly (Serial Number 170000989 and above) 2 1 3 NOTE: Screws, nuts, bolts, clips, and other small hardware are contained in the Hardware Kit: 78-8114-9023-0 (See Section 15). Top Cover Assembly Parts List (Serial Number 170000989 and above) Item No. 1A 1B 2 3 4 3M Part Number 78-8120-8572-4 78-8120-8573-2 78-8120-4156-0 XO-0038-0820-1 78-8064-1515-0 Description Top Cover Assembly (Basic - Gray color) Top Cover Assembly (Lamp Changer - Gray color) Stage Glass Fresnel Lens, Dual-Element Actuator Switch Qty. 1 1 1 1 1 15 © 3M 2005. All Rights Reserved. 3MTM Overhead Projector 1700 Series Section 8. Illustrated Parts Breakdown Base Enclosure 1 9 8 8 2 6, 7 3 5 4 NOTE: Screws, nuts, bolts, clips, and other small hardware are contained in the Hardware Kit: 78-8114-9023-0 (See Section 15). © 3M 2005. All Rights Reserved. 16