SI-2Ps Dual Xeon Server Board Socket 604 User's Manual 4200-0395-01 Rev. 1.00 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are property of their respective owners. This document contains materials protected under International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual. SI-2Ps Table Of Contents Chapter 1. 1.1. 1.2. 1.3. Introduction .................................................... 1-1 Specifications ......................................................................... 1-1 Layout..................................................................................... 1-3 Jumpers & Connectors Description........................................ 1-4 Chapter 2. 2.1. 2.2. 2.3. 2.4. 2.5. 2.6. 2.7. 2.8. 2.9. 2.10. 2.11. 2.12. 2.13. 2.14. 2.15. 2.16. 2.17. Hardware Setup.............................................. 2-1 CPU Socket ............................................................................ 2-1 System Memory....................................................................... 2-2 EPS12V Power Connectors.................................................... 2-3 FAN Power Connectors.......................................................... 2-4 CMOS Memory Clearing Header .......................................... 2-5 Front Panel Switches & Indicators Connection Headers ....... 2-6 IDE Disk Drive Connector ..................................................... 2-7 PCI Expansion Slot ................................................................ 2-8 Additional COM2 Port Connection Header ........................... 2-9 Additional USB Port Connection Header ............................ 2-10 External Keyboard/Mouse Connection Header ................... 2-11 System Management Bus Connection Header ..................... 2-12 VGA Output Connection Header ......................................... 2-13 Compact Flash Memory Card Reader Slot .......................... 2-14 Status Indicators ................................................................... 2-15 Parallel Port Header.............................................................. 2-16 Debug Card Connection Header (Reserved for internal testing) .............................................................................................. 2-17 2.18. External I/O Panel Connectors............................................. 2-18 Chapter 3. 3.1. BIOS Setup...................................................... 3-1 Main Menu ............................................................................. 3-2 User's Manual 3.2. Advanced Menu ..................................................................... 3-5 3.2.1. 3.2.2. 3.2.3. 3.2.4. 3.2.5. Advanced BIOS Features ...................................................3-5 Advanced Chipset Features ................................................3-8 Integrated Peripherals .......................................................3-10 Power Management Setup ................................................3-13 PnP/PCI Configurations ...................................................3-15 3.3. 3.4. 3.5. 3.6. Security Menu ...................................................................... 3-17 PC Health Menu ................................................................... 3-18 Clk/Misc. Menu.................................................................... 3-20 Exit Menu ............................................................................. 3-22 Chapter 4. 4.1. Driver Installation .......................................... 4-1 Setup Items ............................................................................. 4-2 Appendix A. How to Get Technical Support ..................... A-1 SI-2Ps Introduction 1-1 Chapter 1. Introduction 1.1. Specifications Processor · Supports dual Intel Xeon processor with 512K L2 cache FSB 533/400 MHz up to 3.2GHz and higher Intel E7501 Chipset Memory Controller Hub (MCH) 2x 82870P2 64-bit PCI/PCI-X Controller Hub 2 (P64H2) 82801CA I/O Controller Hub 3-S (ICH3-S) Four 184-pin DIMM sockets Supports 144-bit wide dual channel DDR 266/200 memory Up to 8GB, ECC Registered memory capacity Onboard ATi RAGE XL PCI interface VGA Supports Plug-and-Play (PNP) Supports Advanced Configuration Power Interface (ACPI) Write-Protect Anti-Virus function by AWARD BIOS 4MB Flash ROM 3x Intel 82546EB dual ports 64-bit Gigabit Ethernet Controllers Front panel LAN Active/Link LED Cavium CN-1120 1x PCI-X, 64bit/133MHz (3.3V) 1x 44-pin IDE connector 1x VGA Port User's Manual Chipset · · · · · · · · · · · · · · · · · Memory AGP System BIOS LAN Networking Security Extension Slot Internal I/O Connectors 1-2 · · · · · · · · · · · Chapter 1 1x COM port header (COM2) 1x USB 1.1 header (Each header supports two USB 1.1 devices) 1x SM Bus header (For SM Bus and I2C) 2x USB 1.1 ports 1x COM port (COM1) 6x RJ-45 w/Transformer and LED single port LAN connector (GbE) 1x 50-pin IDE interface Compact Flash Type II socket EEB 3.0 form factor (12" x 13") Hardware monitoring ­ Including Fan speeds, Voltages, System environment temperature Chassis intrusion detector header 3.3V 64-bit riser card supported (option) Front Panel I/O Back Panel I/O Miscellaneous Specifications and information contained herein are subject to change without notice. SI-2Ps Introduction 1-3 1.2. Layout User's Manual 1-4 Chapter 1 1.3. Jumpers & Connectors Description Jumpers CCMOS1 Description CMOS Memory Clearing Header Default Setting Pins 1-2 Closed (Normal) Connectors CF1 COM2 DIMM 1~4 EPS12V1 EPSPWR1 FAN1~9 FPIO1 FP-USB1 IDE1 KM1 LPC LPT1 PCI1 SM-BUS1 VGA1 Description Compact Flash Memory Card Reader Slot Additional COM2 Port Connection Header DDR DIMM Slots 8-Pin EPS12V Power Connector 24-Pin EPS12V Power Connector Fan Power Connectors Front Panel Switches & Indicators Connection Headers Additional USB Port Connection Header 2.5" Hard Disk Drive Connector Keyboard/Mouse Connection Header Debug Card Connection Header (Reserved for internal testing) Parallel Port Connection Header 64bit/133MHz PCI-X Slot System Management Bus Connection Header VGA Output Connection Header SI-2Ps Hardware Setup 2-1 Chapter 2. Hardware Setup 2.1. CPU Socket This server board provides dual 604-pin Zero Insertion Force (ZIF) sockets to install the Intel Xeon CPU. You may install either one or two CPUs, but to set up system with only one CPU, it MUST be installed in the primary socket (socket "CPU0" in this model). To install a second processor, you must verify that the second processor is identical to the first processor with same voltage and speed. Using non-identical processors could cause system failure. User's Manual 2-2 Chapter 2 2.2. System Memory This server board provides six 184-pin Double Data Rate (DDR) Dual Inline Memory Module (DIMM) slots for Registered ECC DIMM modules with memory expansion size up to 8GB (DDR266/DDR200). DIMM 1 2 3 4 Registered ECC DIMM Module 128MB, 256MB, 512MB, 1GB, 2GB 128MB, 256MB, 512MB, 1GB, 2GB 128MB, 256MB, 512MB, 1GB, 2GB 128MB, 256MB, 512MB, 1GB, 2GB Total System Memory Total Memory 128MB ~ 2GB 128MB ~ 2GB 128MB ~ 2GB 128MB ~ 2GB 256MB ~ 8GB ATTENTION: Populate the DDR DIMMs in-order and in-pair (of the same type and size) by starting from DIMM1+DIMM2 to DIMM3+DIMM4. SI-2Ps Hardware Setup 2-3 2.3. EPS12V Power Connectors These two connectors connect to EPS12V power supply. WARNING: This server board requires an EPS12V power supplier with 460W capacity at least for Intel Xeon CPU system. DO NOT use ATX 2.x, ATX12V or dual AMD power supplies. NOTE: The auxiliary 12V power (EPS12V1) is necessary to support Intel Xeon CPUs. Failing to provide such extra power will result in the system's booting failure. User's Manual 2-4 Chapter 2 2.4. FAN Power Connectors These 3-pin connectors each provide power to the cooling fans installed in your system. WARNING: These fan connectors are not jumpers. DO NOT place jumper caps on these connectors. SI-2Ps Hardware Setup 2-5 2.5. CMOS Memory Clearing Header This header uses a jumper cap to clear the CMOS memory. · · Pin 1-2 shorted (default): Normal operation. Pin 2-3 shorted: Clear CMOS memory. ATTENTION: Turn the system power off first (including the +5V standby power) before clearing the CMOS memory. User's Manual 2-6 Chapter 2 2.6. Front Panel Switches & Indicators Connection Headers This header provides connection to external switches and indicators. Pin 1-2 3-4 5-6 7-8 9-10 Definition Power LED Power On Reset Case Intrusion HD LED SI-2Ps Hardware Setup 2-7 2.7. IDE Disk Drive Connector This connector provides two 2.5" IDE hard drives connection. User's Manual 2-8 Chapter 2 2.8. PCI Expansion Slot This slot provides one 64bit/133MHz PCI add-on-card connection. SI-2Ps Hardware Setup 2-9 2.9. Additional COM2 Port Connection Header This header provides an additional COM2 connection. Pin 1 3 5 7 9 Definition DCDA SOUTA Ground RTSA RIA Pin 2 4 6 8 10 Definition SINA DTRA DSRA CTSA VCC User's Manual 2-10 Chapter 2 2.10. Additional USB Port Connection Header This header provides two additional USB port connections. Pin 1 3 5 7 Definition VCC - Data 0 + Data 0 Ground Pin 2 4 6 8 10 Definition VCC - Data 1 + Data 1 Ground NC SI-2Ps Hardware Setup 2-11 2.11. External Keyboard/Mouse Connection Header This header provides external Keyboard and Mouse connection. Pin 1 3 5 7 9 Definition VCC NC KB Data Ground KB Clock Pin 2 4 6 8 10 Definition VCC NC Mouse Data Ground Mouse Clock User's Manual 2-12 Chapter 2 2.12. System Management Bus Connection Header This header provides one system management bus (SMBus) connection. Pin 1 3 5 Definition SMBCLK Ground VCC Pin 2 4 Definition NC SMBDATA SI-2Ps ...