AC C6606 Pack Contents and Fitting Directions Pack Contents: The AcoustiCaseTM AC C6606 pack contains 15 pieces, of 3 different materials. Acoustic Foam Acoustic Barrier Mass Acoustic Composite Fitting Directions: Fit according to the positions indicated, in the numerical order shown from 1 to 15 . Where self adhesive is on the reverse of the materials, remove the backing paper and adhere lightly to clean and dust-free surfaces, making sure that the material is correctly positioned. If you make a mistake - it can be re-applied for a second attempt - but be aware that excessive re-application will cause a deterioration in the adhesive. Once well positioned, press the materials firmly into place. Ensure you read the important safety information before installing the materials. 20mm 15 11 Opt 10 9 12 20mm 3 Opt 5 14 2 6 Opt 7 1 13 4 Opt Opt 8 Opt Opt The system speaker and accompanying 80mm internal fan bracket is an optional component. The detachable portions indicated on items 4 and 5 can be removed if an internal fan is installed. Opt Optional READ THIS BEFORE INSTALLING THE MATERIALS! ONLY position the materials as directed in the fitting directions and as depicted in the graphics above. DO NOT cover the ventilation holes at the rear of the case with any materials. DO NOT position the rear of the case close to a permanent heat source, such as a radiator, or very close to an airflow obstruction, such as a wall. This may inhibit air circulation required for cooling. Leave a gap at the rear of the case of at least 20cm to allow free movement of air in and out of the case. DO NOT position materials inside the case in such a way that may inhibit the correct functioning of any internal components, especially cooling fans, disc drives and moving parts. These components require adequate space and ventilation. Whilst every care has been taken to produce a set of templates that will be appropriate for the majority of component configurations, it is the responsibility of the machine builder to position the materials appropriately to facilitate normal functioning of internal components. V 1.2 ...