Installation instructions for the ACT1030 VRC ACT1030 Proximity Reader Self-tapping Security screw ACT1030 VRC Wiring for Clock and Data / Wiegand Reader 1. Connect the ACT1030 Proximity reader to the controller with the aid of the wiring diagram supplied Remove the plastic caps from the ACT1030 and position the reader in the mounting location. Place the ACT1030 VRC over the ACT1030 reader and using the self-tapping security screws and security driver bit supplied, fix the cover and reader in place. 2. 3. White Green Blue Red Black Brown Yellow Orange Sense Clock / Data1 Data / Data 0 +5v 0v Red Led Grn Led (Buzzer Ctrl) The standard wiring colours for ACT1030 Proximity reader is shown above. Readers should be a maximum of 30m from the controller when powered from +5V and a maximum of 100m when powered from +12V. U nit 8 Tallaght B usiness Centre, W hitestown, Tallaght, Dublin 24, Ireland. Telephone: 353 1 462 2585. Telefax: 353 1 462 2587. E-mail: sales@ accesscontrol.ie W eb: www.accesscontrol.ie ...