ACTSmart Standalone Installation Diagram +V Default configuration for AUX I/O 2 is Door Alarm. Sounder OM RO N 1AAC 125V 1A 30V DC + BATCH: 01XXPRODUCT : ACTSmart REV1.3 SERIAL NUMBER : 00XXX 0123456789 The ACTSmart may be powered from 12 or 24V AC or DC for Standalone operation. +12V 12V = DC 5A/250V ~AC SCHRACK Door Release Button Aux I/O 2 Programmable Input Default configuration for Programmable Input is Door Release Button. Aux I/O 1 Door Contact Default configuration for AUX I/O 1 is Door Contact. Volt-Free Tamper Contacts Note: To program the various Input and Output operations for the ACTSmart unit, please refer to page 10. OMO RN 5A AC 250V 5A DC 30V B A Tamper The Aux I/O Output is an open collector output capable of sinking 100mAmps. 12-24V DC/AC 0V N/ O COMM N/ C 0V Power Supply Unit - 15 - Important! Always Place Varistor Across Lock Terminals This illustration shows wiring for normally de-energised locks. If normally energised locks are required, use the N/C relay contact. - 15 - ...