Instant TV Deluxe PCI Instant TV Deluxe PCI English Watch and Record TV shows on CD or DVD Hardware User's Guide ADS Tech website: www.adstech.com Support: www.adstech.com/support/support.asp Table of Contents Quick Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 IR Blaster Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Service and Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 © 2004 ADS Technologies. All Rights Reserved Revision 4 March 2004 Apple and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, & Windows 98 are registered trademarks of Microsoft Corporation. IBM is a registered trademark of the International Business Machines, Inc. ADS is a registered trademark of ADS Technologies Inc. ADS Technologies (ADS) makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The information furnished within this written document is for information purposes only and is subject to change without notice. ADS Technologies assumes no responsibility or liability for any errors or inaccuracies that may appear herein. ADS makes no commitment to update or to keep current information contained within this document. (rtt) page 3 Quick Installation Guide: Instant TV Deluxe (PCI) This Quick Installation Guide should be used as a reference guide only. It is highly recommended that you read the complete Instant TV Deluxe Manual before using this product to help ensure you get the most of your Instant TV Deluxe. Follow these instructions when using the Instant TV Deluxe for the first time. Instant TV Deluxe Hardware Installation: 1) Insert your Instant TV Deluxe into an open PCI slot on your motherboard. 2) Connect the Coaxial cable or Audio/Video cables from your video source to the Instant TV Deluxe. 3) Insert the Instant TV Deluxe CD into your CD-ROM drive. 4) Wait for the Autorun window to appear and click on "Install Drivers" on the PCI portion. The drivers will automatically install. (Instant TV Deluxe PCI connection diagram image) ADS IR Blaster Hardware Installation: 1) Insert the Instant TV Deluxe CD into your CD-ROM drive. 2) Connect the ADS IR Blaster into an open USB port on the back of your computer. 3) Drivers for the IR Blaster will be located on the Instant TV Deluxe CD. When prompted for drivers, direct the driver installation to your CD-ROM drive. page 4 Step by Step Hardware Installation: 1. Turn your computer off. 4. Insert the Instant TV Deluxe PCI into an open PCI slot on the motherboard and screw in tightly. TURN OFF 2. Take the case off of your computer to have access to the PCI slot of your motherboard. 5. Put the case of your computer back on. 3. Take the Instant TV Deluxe PCI from the packaging. 6. Press the power button to turn the computer on to start the installation of the drivers. TURN ON page 5 Step by Step Instant TV Deluxe (PCI) Driver Installation: Step 1: After you have intalled the Instant TV Deluxe PCI into an open PCI slot, turn on your computer. Step 2: Place the provided Instant TV Deluxe CD into your CD ROM drive and wait for the autorun screen to come up. Once the Autorun sceen has launched click " Install Drivers" and follow the on-screen instructions. Step 3: Click "Start" to begin the installation of the drivers. Step 4: You have now finished installing the drivers for the Instant TV Deluxe PCI, Click "OK" to finish. Step 5: To verify that you have installed your hardware properly, check in the "Device Manager": a. Right-Click on "My Computer" b. Left-Click on "Properties" c. Click on the "Hardware Tab" d. Click on "Device Manager e. Then click on the (+) next to "Sound Video and Game Controllers" * Note: Make sure that there are no Yellow (!) in the "Device Manager" page 6 IR Blaster The IR Blaster is an infra-red transmitter and receiver. As an IR Receiver the IR Blaster acts as a receiver for the Instant TV Deluxe remote control. As an IR Blaster the device gives you the power to control external TV receiver devices. The IR Blaster is a very powerful addition to a TV Capture card. Today many people do not receive TV signals over conventional analog cable systems. Many households today get TV content delivered via digital cable or satellite TV receivers. Instant TV Deluxe, the IR Blaster and included software allow you to schedule recordings of your favorite TV shows and capture those programs to your computer hard drive, no matter how the TV signal is delivered to your home. The IR Blaster communicates with these external tuning devices and allows you to record TV shows to your computer via the RCA or S-Video cables instead of the cable ready tuner. Important Note: The IR Blaster is a powerful IR transmitter/receiver device but please keep in mind that Infra-red signals are a line of sight technology. IR signals cannot pass through walls. The IR Blaster can control devices that are in the same room or proximity to the IR Blaster device. IR Blaster as a Remote Control Receiver The Remote control and IR Receiver function of the IR Blaster gives you complete navigation and control of the Beyond TV and Quick DVD applications. (See the Remote Control overview section for complete remote control review.) Applications supported by IR Blaster receiver and Remote Control SnapStream Beyond TV 3.5 SE ArcSoft Quick DVD CapWiz ­ coming soon via a free internet download. Note: Currently only the on-screen remote control is available for CapWiz. We will have a free download patch that adds remote control to CapWiz in the near future. IR Blaster as an IR Code Transmitter ­ Blaster function Applications supported by IR Blaster function: SnapStream Beyond TV 3.5 SE The IR Blaster is also a transmitter. It has been designed to allow you to control external TV tuning devices such as Cable Set Top boxes and Satellite receivers. When you run the Beyond TV Setup Wizard and choose Cable box or Satellite receiver as your TV source the IR Blaster will send codes to your tuning device to change channels. The Beyond TV setup Wizard lists several remotes in it's database. If your device is not in the list you can "Teach" the IR Blaster your remote control codes. The IR Blaster will learn your TV Remote TV tuning codes so that the IR Blaster can change the channels on your Cable Set Top box or satellite receiver so you can schedule recordings and automatically change channels to record the correct show. (see instructions on Beyond TV Setup Wizard for complete setup instructions) page 7 IR Blaster and the Instant TV Deluxe Remote 1) 2) Once you have programmed the IR Blaster to send TV channel changing codes to your set top box, you can use the Instant TV Remote in conjunction with the IR Blaster to control your set top box. Point the Instant TV Deluxe remote at the IR Blaster ­ press 4 and Enter ­ the IR Blaster will receive the code and then transmit the correct code to change to channel 4 on your set top box. Use the computer keyboard to change channels on your set top box ­ press 4 followed by enter and the IR Blaster will send a code to change your set top box to channel 4. Note: The Instant TV Deluxe Remote is not a learning remote. The IR Blaster is a learning IR Blaster when used in conjunction with the Beyond TV software. The Instant TV Remote cannot directly control your TV or set top box....the IR Blaster does. IR Blaster Installation NOTE: Make sure that you have the Instant TV Deluxe CD inserted into your CD-ROM drive when plugging in your hardware. The ADS IR Blaster is a plug `n' play USB Device, so it's easy to setup. Simply plug it into any PC running Windows and you will automatically be prompted for the driver disk. Step 1: Plug the USB IR Blaster into an open USB port on the back of you computer; and a "Found New Hardware Wizard" window will come up to start the driver install, click "Next" to continue on. Step 2: The Windows Logo testing window will come up, to continue with the driver install click on "Continue Anyways". page 8 Step 3: You are now finished with the hardware driver install of the ADS IR Blaster, click "Finish" to finalize the installation. This USB device creates a wireless, infrared connection between your cable box or satellite receiver and the PC running Beyond TV. The USB IR Blaster," allows any USB-equipped PC to exchange infrared signals with common audio/video equipment. For Beyond TV users who receive their television signal via satellite or cable boxes, the USB IR Blaster completes a critical link: it allows the PC running Beyond TV to tune to the channels received on your receiver box so you can watch live TV and make recordings. Best of all...the infrared signal means that the connection between PC and receiver box is wireless. Additionally, this USB device does away with the hassles of similar devices that use a serial connection. ADS Instant FM With the ADS Instant FM you can now listen to your favorite radio station straight from your computer.You can also record your music from the radio to your computer with just a click of a button. Step 1: Insert the ADS Instant TV Deluxe CD into your CD ROM drive and wait for the Autorun screen to appear. Then click on "Instant FM" to start the installation process of the FM module. page 9 Step 2: You will now see the Instant FM Setup screen, follow the installation instructions and hit "Next". Step 3: Choose the destination where you want to install the software. To proceed with the installation click "Next". Step 4: The setup will now add program icons to the Program Folder, click "Next" to continue. Step 5: You are now finished with the Instant FM installation, click "Finish" to finalize the install. Step 6: To start the application, look on your desktop where you will see an icon named "INSTANT FM" double-click that to open. page 10 ADS Instant FM Functions Adjust Frequency up and down Frequency Next Channel Saved station channels Recall last channel Enter Volume up and down Memo Channel Record Mute Setup Play your recorded file -/+ f g Allows you to adjust the Frequency up and down Skip back and forth from channel to channel 0-9 Preset channel buttons To toggle between the current channel and the previous channel Press the Enter button after inputting a channel Adjust volume up and down Allow you to name your stations that are set on each channel The setup button will take you to the setup page where you can program your favorite stations to each channel, enable recording duration, name your next recording file, and select the location of where you want to save the recordings. page 11 To mute/unmute the volume To start recording your radio tunes To bring up the recorded files you want to playback To stop the recording or playback of your recorded files Rewind the playback Fast Forward the playback To program your favorite stations to each channel Step 1: Step 2: Step 3: Click on the "Setup" button. At the top left hand corner of the Setup page click on Channel tab. One at a time click on each frequency and change to your desired station by either scrolling up and down to your desired station or simply type it in using the number pad on your keyboard. You can also change the name to match the station as well. Once you are finished setting up your channels, press the "OK" button to save the settings. Now you can use the numbers on Instant FM interface to jump right to the station you have setup. To change the destination folder of your captures, time duration, audio format, and audio output format click on the "Capture" tab. Time Duration Saved file location File naming Once you have made your changes, press "OK" to save the changes. page 12 Service and Warranty: If you require assistance with the installation, operation, or application of your ADS Technologies, Inc. product there are several options available to you as described in the technical support section of this manual. Your primary source for information and assistance is always your computer store or computer parts dealer. If your ADS product needs repair or replacement, contact your dealer for on-site repair service. The ADS Technologies technical support and customer service staff can aid in solving many problems. Our technical support department is available to repair any ADS Technologies product. You or your dealer must return products to our factory for repair or warranty replacement. Return/Replacement: If you need to return your ADS Technologies product you should return the product dire ...