PYRO 1394DV for Notebooks Hardware Installation 1. Plug the 1394 CardBus cable into the PYRO Cardbus card. 2. Locate the Carbus slot on your laptop computer and insert the PYRO Cardbus card. 3. Power on your laptop computer and install the software drivers. ADS Technologies - Shannon Industrial Estate Shannon Co. Clare, Ireland Phone: +353.61.702042 www.adstech.com Driver Installation for Windows Step 1 To the left is a picture of the dialog box that will notify you that Windows has detected your new hardware. Step 2 Windows will now automatically run the "Add New Hardware Wizard." Select the first option "Search for the best driver..." and click the "Next" button. Step 3 You will now see a box that asks where you would like to search for the drivers. Select the "CD-ROM" option. Make sure you have the Windows 98 SE, Windows 2000, or Windows ME CD inserted in your CD-ROM drive. After you have done this, click on the "Next" button. Step 4 After Windows locates your new driver on the Windows 98 SE, Windows 2000, or Win ME CD, it will ask if you would like to install the driver. Select the first option that says "The Updated Driver" then click the "Next" button. Step 5 Windows will now inform you it is ready to install your new driver. Verify that the path is the same as the picture to the left. It should read "C:\WINDOWS\INF\1394.INF" Now click the "Next" button. Step 6 Congratulations! You are now done with the driver installation. All that is needed from you now is to click the "Finish" button. ...