Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine. For safe and correct use of this machine, please be sure to read the Safety Information in the General Settings Guide before you use it. Important Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Notes Some illustrations in this manual might be slightly different from the machine. Certain options might not be available in some countries. For details, please contact your local dealer. Warning: Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. Notes: The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, see p.2 "Machine Types".) · · · Type 1: DSm622 Type 2: DSm627 Type 3: DSm632 Certain types might not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the metric version. For good copy quality, Nashuatec recommends that you use genuine Nashuatec toner. Nashuatec shall not be responsible for any damage or expense that might result from the use of parts other than genuine Nashuatec parts in your Nashuatec office product. Power Source 220 - 240V, 50/60Hz, 7A or more Please be sure to connect the power cord to a power source as above. For details about power source, see "Power Connection" in the General Settings Guide. Declaration of Conformity "The Product complies with the requirements of the EMC Directive 89/336/EEC and its amending directives and the Low Voltage Directive 73/23/EEC and its amending directives." In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. c means STAND BY. Trademark Acrobat® is a registered trademark of Adobe Systems Incorporated. Copyright © 2003 Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine. For safe and correct use of this machine, please be sure to read the Safety Information in the General Settings Guide before you use it. Important Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Notes Some illustrations in this manual might be slightly different from the machine. Certain options might not be available in some countries. For details, please contact your local dealer. Warning: Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. Notes: The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, see p.2 "Machine Types".) · · · Type 1: IS 2122 Type 2: IS 2127 Type 3: IS 2132 Certain types might not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the metric version. For good copy quality, Infotec recommends that you use genuine Infotec toner. Infotec shall not be responsible for any damage or expense that might result from the use of parts other than genuine Infotec parts in your Infotec office product. Power Source 220 - 240V, 50/60Hz, 7A or more Please be sure to connect the power cord to a power source as above. For details about power source, see "Power Connection" in the General Settings Guide. This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for particular applications. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale. Declaration of Conformity "The Product complies with the requirements of the EMC Directive 89/336/EEC and its amending directives and the Low Voltage Directive 73/23/EEC and its amending directives." In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. c means STAND BY. Trademark Acrobat® is a registered trademark of Adobe Systems Incorporated. Copyright © 2003 Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note Manuals provided are specific to machine type. Adobe Acrobat Reader is necessary to view the manuals as a PDF file. Two CD-ROMs are provided: · CD-ROM 1 "Operating Instructions for Printer/Scanner" · CD-ROM 2 "Scanner Driver & Document Management Utilities" General Settings Guide Provides an overview of the machine and describes System Settings (paper trays, Key Operator Tools, etc.), Document Server functions, and troubleshooting. Refer to this manual for Address Book procedures such as registering fax numbers, e-mail addresses, and user codes. Network Guide (PDF file - CD-ROM1) Describes procedures for configuring the machine and computers in a network environment. Copy Reference (this manual) Describes operations, functions, and troubleshooting for the machine's copier function. Facsimile Reference Describes operations, functions, and troubleshooting for the machine's facsimile function. Facsimile Reference Describes advanced functions and settings for key operators. Printer Reference 1 Describes system settings and operations for the machine's printer function. Printer Reference 2 (PDF file - CD-ROM1) Describes operations, functions, and troubleshooting for the machine's printer function. Scanner Reference (PDF file - CD-ROM1) Describes operations, functions, and troubleshooting for the machine's scanner function. i Manuals for DeskTopBinder V2 Lite DeskTopBinder V2 Lite is a utility included on the CD-ROM labeled "Scanner Driver & Document Management Utilities". · DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2) Describes installation of, and the operating environment for DeskTopBinder V2 Lite in detail. This guide can be displayed from the [Setup] display when DeskTopBinder V2 Lite is installed. · DeskTopBinder V2 Lite Introduction Guide (PDF file - CD-ROM2) Describes operations of DeskTopBinder V2 Lite and provides an overview of its functions. This guide is added to the [Start] menu when DeskTopBinder V2 Lite is installed. · Auto Document Link Guide (PDF file - CD-ROM2) Describes operations and functions of Auto Document Link installed with DeskTopBinder V2 Lite. This guide is added to the [Start] menu when DeskTopBinder V2 Lite is installed. Manuals for ScanRouter V2 Lite ScanRouter V2 Lite is a utility included on the CD-ROM labeled "Scanner Driver & Document Management Utilities". · ScanRouter V2 Lite Setup Guide (PDF file - CD-ROM2) Describes installation of, settings, and the operating environment for ScanRouter V2 Lite in detail. This guide can be displayed from the [Setup] display when ScanRouter V2 Lite is installed. · ScanRouter V2 Lite Management Guide (PDF file - CD-ROM2) Describes delivery server management and operations, and provides an overview of ScanRouter V2 Lite functions. This guide is added to the [Start] menu when ScanRouter V2 Lite is installed. Other manuals · PS3 Supplement (PDF file - CD-ROM1) · Unix Supplement (Available from an authorized dealer, or as a PDF file on our Web site.) ii What You Can Do with This Machine Types of Duplex Copies 1-sided 2 Pages 2-sided 1 Page (see p.43 " 1 Sided 2 Sided") 2-sided 1 Page 2-sided 1 Page (see p.43 " 2 Sided 2 Sided") 1-sided 4 Pages 2-sided 1 Page (see p.46 " 1 Sided 4 Pages Combine 2 Side") 2-sided 2 Pages 2-sided 1 Page (see p.47 " 2 Sided 4 Pages Combine 2 Side") 1-sided 8 Pages 2-sided 1 Page (see p.46 " 1 Sided 8 Pages Combine 2 Side") 2-sided 4 Pages 2-sided 1 Page (see p.47 " 2 Sided 8 Pages Combine 2 Side") Front Front Back Back 1-sided 16 Pages 2-sided 1 Page (see p.47 " 1 Sided 16 Pages Combine 2 Side") 2-sided 8 Pages 2-sided 1 Page (see p.47 " 2 Sided 16 Pages Combine 2 Side") Front Front Back Back Bound Originals 2-sided Pages (see p.48 " Book 2 Sided") Front/Back Bound Originals 2-sided Pages (see p.49 " Front & Back 2 Sided") iii Copying Book Originals 1-sided 4 Pages Open to Left 1 2 3 4 1 4 2 3 3 Booklet (see p.50 " 1 Sided Booklet") 1 Open to Right 1 2 3 4 4 1 3 2 3 1 2-sided 2 Pages Open to Left Booklet (see p.50 " 2 Sided Booklet") 3 1 Open to Right 3 1 1-sided 1 2 Magazine (see p.50 " 1 Sided Magazine") Open to Left 5 2 7 1 8 4 3 6 5 13 7 8 Open to Right 1 2 5 7 2 8 1 5 6 3 4 31 7 8 2-sided Magazine (see p.51 " 2 Sided Magazine") Open to Left 5 13 Open to Right 5 31 iv Combining Multiple Pages onto a Single Page (see p.45 " One-Sided Combine") 1-sided 2 Pages 1-sided 1 Page 2-sided 1 Page 1-sided 1 Page 1-sided 4 Pages 1-sided 1 Page 2-sided 2 Pages 1-sided 1 Page 1-sided 8 Pages 1-sided 1 Page 2-sided 4 Pages 1-sided 1 Page Copying Originals Such as Books (see p.48 "Series Copies") Bound Originals 1-sided Pages Copying 2-Sided Pages onto 1-Sided Pages (see p.43 "2 Sided 1 Sided") 2-sided 1 Page 1-sided 2 Pages Bound Originals 2-sided Pages Front/Back Bound Originals 2-sided Pages v TABLE OF CONTENTS Manuals for This Machine ...................................................................................... i What You Can Do with This Machine.................................................................. iii How to Read This Manual .....................................................................................1 Machine Types .......................................................................................................2 Functions that Require Options ...........................................................................3 Control Panel..........................................................................................................4 Display Panel .............................................................................................................6 1. Placing Originals Originals .................................................................................................................7 Sizes and Weights of Recommended Originals......................................................... 7 Sizes Detectable by Auto Paper Select .....................................................................9 Missing Image Area ................................................................................................. 10 Placing Originals.................................................................................................. 11 Original Orientation .................................................................................................. 11 Placing Originals on the Exposure Glass................................................................. 12 Placing Originals in the Auto Document Feeder ...................................................... 13 2. Copying Basic Procedure................................................................................................... 17 Interrupt Copy .......................................................................................................... 18 Left Original Beeper ................................................................................................. 19 Job Preset ................................................................................................................ 19 Copying from Paper Tray 2 ................................................................................. 20 Using Tray 2 as the Bypass Tray ............................................................................. 20 Copying from the Bypass Tray........................................................................... 23 Copier Functions ................................................................................................. 26 Adjusting Copy Image Density ........................................................................... ...