User manual AIRWELL RC4 900087

REMOTE CONTROL ENGLISH A UT O P R O G R A M M I N G A N D O P E R AT I N G M A N U A L CONTENTS Remote Control Operation procedure Turning on the Air Conditioner Ventilating Operation Cooling Operation Cooling Operation with Auto Fan Mode Heating Operation Heating Operation With Auto Fan Mode Auto Cooling / Heating Operation Dry Operation Selecting The Temperature I FEEL/ROOM Temp Function Sleep Function Timer Operation Timer Operating Modes Air Flow velocity and Direction Adjustments Turning off the Air Conditioner Current Clock Time Set Lock Function Ionizer/ E.S.F Operation 1 2 2 2 2 2 2 2 3 3 3 3 3 4 5 8 8 8 8 8 START / STOP button Operation mode selection button AUTO COOLING HEATING FAN DRY I FEEL temperature sensing and Room temperature display button FAN SPEED control button Set point temperature UP and DOWN button AUTO SLEEP button Vertical swing button Horizontal swing button TEMP Ionizer & E.S.F and Fresh-Air button TIME SET button HOUR TIMER button Clear button LCD operation display RM sensor Infrared signal transmitter LOCK Button Transmission sign 18 TIMER UP button TIMER DOWN button 19 1 OPERATION PROCEDURE TURNING ON THE AIR CONDITIONER Press the START/STOP button (1) to turn on the air conditioner. After connecting to the power supply, The indicator (A) on the air conditioner light up, indicating that the air conditioner is in the standby status. Please note that LCD operation display (13) will always show the last mode of operation and the previous function used. If you want to change the control settings, proceed according to the following instructions. Otherwise, the air conditioner will start and operate in the same mode and functions prior to being turned off. VENTILATING OPERATION Select the ventilating mode by pressing MODE button (2). Switch to the desired fan speed by pressing FAN speed button (4). COOLING OPERATION Select the COOLING mode by pressing MODE button (2). Switch to the desired FAN SPEED or to AUTO FAN by pressing button (4). Select suitable temperature setting. By selecting the COOLING mode, the air flap will move automatically to horizontal air delivery position, optimal for cooling. COOLING OPERATION WITH AUTO FAN MODE This operation starts with the highest air flow in order to quickly lower the room temperature. It will then automatically switch to the low air flow to quietly maintain the selected temperature. HEATING OPERATION Select the HEATING mode by pressing MODE button (2). Switch to the desired FAN SPEED or to AUTO FAN by pressing FAN button (4). Select suitable temperature setting. By selecting the HEATING mode, the air flap will move automatically to vertical air delivery position, optimal for heating. The HOT KEEP function is provided. The fan will be turned off when the indoor coil temperature is not sufficiently hot to prevent uncomfortable cold air drafts. In some models the HOT KEEP function is operating in AUTO FAN mode only. HEATING OPERATION WITH AUTO FAN MODE This operation starts with the highest air flow in order to quickly raise the room temperature. It will then automatically switch to a lower air flow to quietly maintain the selected temperature. 2 AUTO COOLING/HEATING OPERATION Select the AUTO mode by pressing MODE button (2). Switch to the desired FAN SPEED or to AUTO FAN by pressing button (4). Select suitable temperature setting. The air flap will automatically move to either horizontal air delivery for cooling or to vertical air delivery for heating. At start, the air conditioner will select its mode of operation according to the room temperature and the temperature setting. DRY OPERATION Select the DRY mode by pressing MODE button (2). Select the suitable temperature setting. While in DRY mode, the air conditioner will operate at low fan speed, regardless of the fan setting on the LCD operation display. Fan might terminate operation from time to time to prevent from over cooling. By selecting the mode, the air flap will move automatically to optimal horizontal air delivery position. SELECTING THE TEMPERATURE Press TEMP button (5) to change the temperature setting in the LCD operation display(13).The temperature setting is shown in degrees centigrade. I FEEL/ROOM TEMP FUNCTION OPERATION Press button (3) to activate the I FEEL function. Thermometer sign will appear on the LCD operation display (13). Select suitable temperature setting. Make sure that the remote control unit is aimed at the air conditioner, with the I FEEL sensor (14) in front. Prevent the I FEEL sensor from being affected by heat sources such as lamps, heaters, direct sun, etc. or from being directly affected by the air conditioner air flow. These may cause the sensor to transmit the Wrong temperature data, thereby disturbing the performance of the I FEEL function. By pressing on ROOM temperature, the measured room temperature and the room temperature sign will be displayed. To cancel the ROOM Temperature display press on one of the following: Press again on ROOM temperature button (3). Change of MODE button (2) Note: Room temperature range is between 6 and 36 in 1 increments. Display should show "HI" or "LO" to represent temperature that is above 36 or below 6 . SLEEP FUNCTION Press the SLEEP button (6) to select the SLEEP function. The sleep icon light while the sleep OFF time icon and the time which is 7 hours after current time blink as default. The default setting can be changed from 3 hr. to 12 hr. by pressing up and down buttons HOUR+(11) and HOUR-(12) respectively. (The sleep timer will display the default time or the setting time plus the current time initially in the display). For example: current time is 23:00 and the sleep mode is set, the sleep mode OFF time will be 6:00. If the sleep off time is set to 10 hr, the sleep mode OFF time will be 9:00. All other timers will temporarily be suspended during the activation of the sleep timer. The other timers will resume operation at the end of the SLEEP time. To cancel the SLEEP function press one of the following: START/STOP button (1) SLEEP button (6) NOTE: In some models the SLEEP icon lights only and the OFF time is set for seven hours as default. 3 TIMER OPERATION There are four timers that can be selected on the remote control. Two daily timers (designated as T1,T2),and two optional weekend timers (designated as WKTI,WKT2).Each timer can be selected by pressing TIMER button (11).To set each timer use time adjust up and down buttons Hour+(18) and Hour-(19) respectively. SET button (10) to enable the timer and/or CLEAR button (12) to disable the timer. Indicator (E)on the air conditioner will light up during timer operation. NOTE: After a power, failure the timer operation is cancelled, timer indicator (E)on the air conditioner will blink, the unit will be automatically turned to stand-by mode and indicator (A) lights. To resume the timer operation, follow the instructions below. A. DAILY TIMER The daily timers T1 and T2 can be set for ON and OFF separately for two different time periods. Once the timer is set it will resume operation when initiated. B. WEEKEND TIMER (OPTIONAL) The weekend timers WKT1 and WKT2 can be set for ON and OFF separately for two different time periods for two days only. It will be effective on the day of setting and on the day after only. At 24:00 on the second day, the WK timer will not be effective anymore and the daily timer will resume its effectiveness. WkT1-effective on the setting day WKT2-effective one day after the setting day. NOTE: 1.During the weekend timer operation, the daily timers will be disabled. 2.The WK timers must be reactivated before every weekend. C. SELECTING A TIMER Press the TIMER button (11) to select a timer. Each time the TIMER button (11) is pressed, one of the four following timer icons will appear on the LCD display. Press TIMER button to select daily timer T1. Press TIMER button to select daily timer T2. Press TIMER button to select weekend timer WKT1 Press TIMER button to select weekend timer WKT2 Icon 1 of Timer T1 will blink Icon 2 of Timer T2 will blink Icons 1 and WK will blink Icons 2 and WK will blink 4 TIMER OPERATING MODES SETTING THE ON TIMER Undertake the following steps after selecting a timer-T1,T2 or WKT1,WKT2,to set a timer for the start time of operation. EXAMPLE: Turning the air conditioner ON at 10:30. Press the SET. button. Set the hours and minutes. Press the SET button Press the CLEAR button. The ON icon & ON time digits will blink 1.Set the ON time at 10:30 2.Press the (HOUR+) up button to advance the time, and press the (HOUR-)down button to retract. 1.The ON time is activated at 10:30(the time ON icon will light) 2.Time OFF icon & OFF time digits will blink. Timer OFF is cleared. SETTING THE OFF TIMER Undertake the following steps after selecting a timer-T1,T2 or WKT1,WKT2,to set a timer for the stop time of operation. EXAMPLE: Turning the air conditioner OFF at 18:30. Press the SET. button. Press the CLEAR button. Set the hours and minutes. Press the SET button The ON icon & ON time digits will blink. 1.The ON time is cleared. 2. OFF time icon & OFF time digits will blink. 1.Set the OFF time at 18:30 2.Press the (HOUR+) up button to advance the time, and press the (HOUR-)down button to retract. OFF time is activated at 18:30 (the (timer OFF icon will light) NOTES: 1.The default setting for the timers are 7:00 and 18:00 for ON and OFF, respectively. 2.The timer mode will display always the last ON and OFF settings on the LCD display 5 SETTING THE ON AND OFF TIMERS Undertake the following steps after selecting a timer-T1,T2 or WKT1,WKT2,to set a timer for the start and stop time of operation. Set the hours and minutes. Press the SET button. EXAMPLE: Press the SET. Turning the air button. conditioner ON at 10:30.and OFF at 18:30. Set the hours and minutes. Press the SET button The ON icon & ON time digits will blink 1.Set the ON time at 10:30 2.Press the (HOUR+) up button to advance the time, and press the (HOUR-) down button retract. 1.The ON time is activated at 10:30(the time ON icon will light) 2.Timer OFF icon & OFF time digits will blink. 1. Set the OFF time at 18:30 2.Press the (HOUR+) up button to advance the time, and press the (HOUR-) down button retract. OFF time is activated at 18:30 (the timer OFF icon will light) TO CHANGE THE TIME SETTING EXAMPLE: To change the ON time setting from 10:30 to 9:20 (while preserving the OFF time 1 setting) Press the TIMER Press the SET button. until the selected timer icon button to enter edit mode blinks. Change the setting Press the SET time to 9:20 by button to save the pressing on new setting. HOUR-. Press the SET button to confirm the previous timer OFF setting 2 3 4 5 Note that the corresponding formerly set timer digits will display without blinking. ON icon & ON time digits blink ON icon & ON time digits blink ON icon & ON time digits light while OFF icon & OFF time digits blink. ON & OFF icons and time digits of the consequent timer light 6 TO CANCEL THE TIMER SETTING FOR A PARTICULAR TIMER To cancel the ON time while keeping the OFF time setting. Press SET. button. Press CLEAR button. Press SET button Press TIMER button to select a timer. 1 The selected timer icon ON icon & ON time digits blink. blinks & the corre spending previous timer ON, OFF settings light. ON time is cleared, OFF icon & OFF time digits blink. Confirm the new setting. TO CANCEL THE ON & OFF TIME SETTIINGS Press TIMER button to select a timer. Press CLEAR button. 1 The selected timer icon blinks & the corre spending previous time ON, OFF settings light. All settings of the selected timer are cleared. NOTES: 1.The default settings for the timers are 7:00 and 18:00,for ON and OFF respectively. 2.The timer mode will always display the last ON and OFF settings on the LCD display. 3.Pressing CLEAR button (12) for 5 seconds will cancel all timer settings and clear timer display. 7 AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT Press button (7) to activate the supply air flap to auto swing; Press button (8) to activate the Horizontal Air Flow to auto swing. Press the two button again, you will cancel auto swing function. To change the AIR FLOW velocity, press the button. Each time the button is pressed, the fan speed is changed in sequence: To change the AIR FLOW blowing direction vertically, press the button. Each time the button is pressed, the mode of the HORIZONTAL VANE is changed in sequence: Auto Swing Auto To change the AIR FLOW blowing direction horizontally, press the button. Each time the button is pressed, the mode of the VERTICAL VANE is changed in sequence: Auto Swing Auto 1) Strong fan will only operation cooling & heating mode 2) Strong fan option is selectable via switch TURNING OFF THE AIR CONDITIONER Press Start /Stop button(1) to turn off the air conditioner. Indicator (A) on the air conditioner will be turned red. Indicating that the air conditioner is in Stand-by mode and ready to accept any new command from the remote control. The remote control LCD will display the clock time. The last operation set-up will kept for the next operation. Ionizer / Fresh Air operation.(optional) Pressing the Ionizer / Fresh air key will cycle in the following manner: Fresh air (continual) & Ionizer Fresh air (continual) Ionizer off Fresh air option is selectable via switch The function will be kept when mode is switch over (E.S.F works together with Ionizer.) CURRENT CLOCK TIME SET Clock setting is performed when batteries are inserted. The remote control displays the setting and the clock display will blink0:00 or 12:00 AM (AM sign will blink, too) till a new time is set. For clock setting, use buttons (18) and (19) for setting the hours and minutes, respectively, and then press timer SET button (10).The clock setting can be also performed by pressing timer SET button (10) for 5 seconds. The clock display will blink, for new setting follow the steps described above. LOCK FUNCTION By pressing LOCK button (16),the remote control will lock the last operation program. All the function buttons will be inoperative, including START/STOP button. By pressing LOCK button (16) again the remote control will be released from its locked position. When lock mode is functioning, the transmission sign (17) will be on. 8 TECHNICAL ENQUIRIES 1800 1800 04 MELBOURNE 745 Springvale Road Mulgrave VIC 3170 SYDNEY Cnr Marion St & Airport Ave (P.O. Box. VQ) Bankstown Airport NSW 2200 BRISBANE Unit 9, 123 Muriel Ave Moorooka QLD 4105 ADELAIDE Offices on the Park Suite 27, 8 Greenhill Road Wayville SA 5034 PERTH Suite 23, 350 Cambridge St Wembley WA 6014 NEWCASTLE PO Box 288 Thornton NSW 2322 NEW ZEALAND 517A Rosebank Road Avondale, Auckland NZ TEL: (09) 820 0333 TEL: (02) 4966 1391 TEL: (08) 9284 0800 TEL: (08) 8372 7866 TEL: (07) 3392 8113 TEL: (02) 9793 3644 TEL: (03) 8544 3505 SERVICE / WARRANTY 1300 553 000 FAX: (03) 8544 3540 FAX: (02) 9793 3688 FAX: (07) 3392 8115 FAX: (08) 8372 7816 FAX: (08) 9284 0600 FAX: (02) 4966 1369 FAX: (09) 820 0332 NZ Tech Support Freecall TEL: 0800 180 094 www.airwell.com.au WITH A CONCERN FOR A CONSTANT IMPROVEMENT, OUR PRODUCTS CAN BE MODIFIED WITHOUT NOTICE. PHOTOS NON CONTRACTUAL. © Copyright 2004