MICRO MUSIC SYSTEM QX-D2400 Operator's manual (GB) 1~23 IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product* enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the product is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS - All warnings on the product and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. 5. CLEANING - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. WATER AND MOISTURE - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or lau ndry tub; in a wet basement; or near a swimming pool; and the like. 8. ACCESSORIES - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer* instructions, and should use a mounting accessory recommended by the manufacturer. A Product and Cart Combination Should Be Moved with Care - Quick stops, excessive force and uneven surfaces may cause the product and cart combination to overturn. 9. VENTILATION - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a builtin installation, such as a bookcase or rack, unless proper ventilation is provided or the manufacturer* instructions have been adhered to. 10. POWER SOURCES - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 11. GROUNDING OR POLARIZATION - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature: If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where exit from the product. 13. NONUSE PERIODS - The power cord of the product should be unplugged from the outlet when left unused for long periods of time. 14. LIGHTENING - For added protection for this product during a lightening storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will present damage to the product due to lightening and power-line surges. 15. POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. OVERLOADING - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 18. SERVICING - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. GB 1 19. DAMAGES REQUIRING SERVICE - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a) When the power-supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improving adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e) When the product exhibits a distinct change in performance - this indicates a need for service. 20. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part, Unauthorized substitutions may result in fire, electric shock or other hazards. 21. SAFETY CHECK - Upon completion of any service or repair to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 22. HEAT - The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat. CAUTION! HAZARDOUS LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID EXPOSURE TO BEAM. CLASS 1 LASER PRODUCT PRECAUTIONS FOR UNIT SECURITY · Before operation, check if the voltage of the unit is in line with the local voltage. · Hold the plug to disconnect it from the mains outlet. Do not pull the power cord. · When the plug of the unit is connected to the mains outlet, the unit will be still connected to AC even of the power is turned off. · Disconnect the plug as soon as liquid or objects enter the unit. The unit cannot be used until being checked by experts. · Do not open the cabinet. Laser rays employed by the unit may damage eyes. Any servicing should be done by qualified service personnel. PLACEMENT · Put the unit where ventilation is good enough to prevent overheating. · Never put the unit in direct sunlight or near heat sources. · Put the unit horizontally, never put any heavy object on the unit. · To protect the pickup, do not put the unit where there is much dust. If there is dust on the pickup, use a cleaning disc to clean it. · Refer to the operation instructions of the cleaning disc you bought. CONDENSATION Moisture will appear on the pickup lens in the following cases: · The unit is suddenly moved from a cold place to a warm place. · The unit is put in a room with a heater, or in cold air from an air - conditioner. · Use the unit in a humid place. In these cases, the unit cannot work. Unload the disc and leave the unit on for about one hour evaporates the water. CLEANING · Use soft cloth with a little neutral detergent to wipe the cabinet, panel and controls. Never use abrasive paper, polishing powder or solvent like alcohol and gasoline. PRECAUTIONS FOR DISCS HANDLING DISC · To keep the disc clean, do not touch the play sides of the disc. · Do not attach paper or ape to the disc. · Keep the disc away from direct sunlight or heat sources. · Store the disc in a disc case after playback. CLEANING DISC · Before playback, wipe the disc outwards from the center with clean cloth. · Do not use any type of solvent such as thinner, benzine, commercially available cleaners or anti-static spray. GB 2 IMPORTANT SAFETY INSTRUCTIONS..............................................................................1 PRECAUTIONS FOR UNIT..................................................................................................2 PRECAUTIONS FOR DISCS...............................................................................................2 TABLE OF CONTENTS.......................................................................................................3 IMPORTANT NOTES...........................................................................................................4 PREPARATION FOR USE....................................................................................................5 LOCATION OF CONTROLS.................................................................................................6 OPERATING INSTRUCTIONS.............................................................................................8 CARE AND MAINTENANCE..........................................................................................................20 TROUBLESHOOTING GUIDE.............................................................................................22 TECHNICAL SPECIFICATION.............................................................................................23 BEFORE WE BEGIN Thank you ....................... for purchasing this audio product. This is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this Owner's Manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by inspectors and found to be in perfect working order before it left our factory. However, there is always the chance that some problem may occur because of rough handling during shipment to the retail store or to the final consumer. If, after reading this Manual, you experience any problems with the operation of this product, please refer to the instructions for obtaining services at the end of this Manual. Once again, thanks for purchasing this audio product. For future reference, record the serial number in the space provided. Model No: QX-D2400 Serial Number: CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT APPAREIL Á LASER DE CLASSE 1 PRODUCTO LAESR DE CLASE 1 CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. This product contains a low power Laser Device. GB 3 IMPORTANT NOTES · Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas. · Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a clean dry cloth. · Operate controls and switches as described in the manual. · Before turning on the power, make certain that the connecting cords and power cord are properly installed. · Store your CDs in a cool area to avoid damage from heat. · When moving the set, be sure to first disconnected the power cord and remove cords connected to other equipment. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. GB 4 PREPARATION FOR USE UNPACKING AND SET-UP · Carefully remove the unit from the carton and remove all packing material from the unit. · Remove any labels or stickers which may be on the front or top of the set, but do not remove any labels from the back or bottom. · We suggested that you retain the original carton and packing materials in case it ever becomes necessary to return your unit for service. This is the only sure way to protect the unit from damage in transit. · If you do dispose of the carton and packing materials, please do so properly. We cares about our environment. POWER SOURCE This system is designed to operate on 230V 50Hz AC house current. Connecting this system to any other power supply could result in damage to the unit which is not cove ...