User manual ALCATEL-LUCENT SPEEDTOUCH 190

SpeedTouchTM190 SIP Gateway Setup and User's Guide Release R1.0 SpeedTouchTM 190 Setup and User's Guide Release R1.0 Status Reference Short Title Copyright v1.0 E-DOC-CTC-20040401-0004 Setup and User's Guide ST190 R1.0 © 2004 THOMSON. All rights reserved. Passing on, and copying of this document, use and communication of its contents is not permitted without written authorization from THOMSON. The content of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by THOMSON. THOMSON assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. Contents 1 1.1 1.2 SpeedTouchTM190 Installation ...................................... 5 Getting acquainted with the SpeedTouchTM190............................................... 6 Setting Up the SpeedTouchTM190...................................................................... 8 2 SpeedTouchTM190 Web Interface ................................ 9 3 SpeedTouchTM190 Calling Services ............................ 13 E-DOC-CTC-20040401-0004 v1.0 3 4 E-DOC-CTC-20040401-0004 v1.0 1 SpeedTouchTM190 Installation 1 SpeedTouchTM190 Installation Introduction Thank you for purchasing the SpeedTouchTM190 SIP gateway. The SpeedTouchTM190 SIP analog telephone adapter allows regular phones, fax or modems to call a compatible peer SIP User over a broadband Internet connection. Contents This Setup and User's Guide will assist you in getting acquainted with the SpeedTouchTM190 SIP Gateway and will learn you how to make calls with your regular phone using the Session Initiation Protocol (SIP). Before connecting the SpeedTouchTM190, please carefully read the SpeedTouchTM190 Quick Installation Guide, and the Safety Instructions and Regulatory Information booklet. THOMSON continuously develops new solutions, but is also committed to improve its existing products. For more information on THOMSON's latest technological innovations, documents and software releases, please visit the SpeedTouchTM web site at: http://www.speedtouch.com Safety Instructions Updates E-DOC-CTC-20040401-0004 v1.0 5 1 SpeedTouchTM190 Installation 1.1 Getting acquainted with the SpeedTouchTM190 Package Checklist The SpeedTouchTM190 package includes: · · · · · · SpeedTouchTM190 SIP Gateway Ethernet cable Telephone cable Power adapter Quick Installation Guide Safety Instructions and Regulatory Information booklet. Please inform your product dealer if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the original packing materials in case there is a need to return it. Front panel layout Front panel LEDs The SpeedTouchTM190 is equipped with five LEDs on its front panel, indicating the state of the device during normal operation: Indicator Name Power Color Green State On Off VOIP Green On Off LAN Green On Off Power On, normal operation Power Off Registration successful to the SIP server Registration failed to the SIP server Ethernet connectivity to the local network No Ethernet connectivity to the local network Description 6 E-DOC-CTC-20040401-0004 v1.0 1 SpeedTouchTM190 Installation Indicator Name WAN Color Green State On Off TEL Green On Off Description Ethernet connectivity to the Internet Gateway Device No Ethernet connectivity to the Internet Gateway Device Phone off hook Phone on hook Back panel layout A B C D E A B C TEL port WAN port LAN port D E Recessed Reset button Power inlet E-DOC-CTC-20040401-0004 v1.0 7 1 SpeedTouchTM190 Installation 1.2 Setting Up the SpeedTouchTM190 Connect the VOIP line Plug the telephone cable (RJ11) provided into the SpeedTouchTM190's VOIP socket. Plug the other end into your telephone's RJ11 line socket. Use an Ethernet cable to wire the SpeedTouchTM190 LAN port to your PC's Ethernet card. Use the Ethernet cable provided to wire the SpeedTouchTM190 WAN port to your Internet Gateway Device. Always check first whether the power supply adapter provided is suitable for the local power specifications. Contact your product dealer in case of any doubt. The power inlet on the SpeedTouchTM190 is marked "12V AC". Plug the adapter's coaxial jack into the SpeedTouchTM190's power inlet and plug the power supply into a power socket outlet. The SpeedTouchTM190 is ready for service as soon as the Power LED on the front panel is constantly lit green. Connect the LAN line Connect the WAN line Connect the power supply 8 E-DOC-CTC-20040401-0004 v1.0 2 SpeedTouchTM190 Web Interface 2 SpeedTouchTM190 Web Interface Introduction The SpeedTouchTM190 comes with an integrated web interface facility. It allows you to monitor the SpeedTouchTM190 simply by using a web browser from any local computer attached to the SpeedTouchTM190. The SpeedTouchTM190 is correctly configured for Internet Telephony via the appropriate configuration profile/file. No further configuration on the web interface is possible. Preconditions Before you can access the SpeedTouchTM190's web pages, make sure that: · The SpeedTouchTM190 and your computer share the same IP subnet (192.168.1.0/ 24). By default the SpeedTouchTM190 has a local IP address 192.168.1.190. To be able to access the web pages, your computer needs to be configured for an IP address in the same subnet, e.g. 192.168.1.1. Your web browser is not using a proxy server and/or the SpeedTouchTM190's IP address is not submitted to a proxy server. · To configure your computer with an IP address, please consult the Operating System's Help. For more information on how to disable your web browser's proxying, please consult the web browser's Help. Browsing the SpeedTouchTM190 web pages To access the SpeedTouchTM190's web pages: 1 2 Start the web browser on your computer. Browse to the SpeedTouchTM190 at http://192.168.1.190/. 192.168.1.190 is the SpeedTouchTM190 default IP address in the very most cases. If not, please contact your product dealer for more information. E-DOC-CTC-20040401-0004 v1.0 9 2 SpeedTouchTM190 Web Interface The SpeedTouchTM190 Start Page The Incoming Call Log page is the SpeedTouchTM190's home page: Topic menu and links On the top of each of the SpeedTouchTM190 web pages a topics menu is provided. This menu navigates you via links through all aspects of the SpeedTouchTM190. The following table list all topic links: Click ... Call Log Security To ... view a logging of incoming, outgoing and missed calls. configure the SpeedTouchTM190 user name and password. 10 E-DOC-CTC-20040401-0004 v1.0 2 SpeedTouchTM190 Web Interface Call Logs The Call Log page is the SpeedTouchTM190 home page. It consist of three sections: · Select Incoming Call Log to view the incoming calls. The SpeedTouchTM190 will only remember the 10 last entries. Note · Each time the SpeedTouchTM190 is restarted, the call log will be cleared. Select Outgoing Call Logs to view the outgoing calls. The SpeedTouchTM190 will only remember the 10 last entries. Note · Each time the SpeedTouchTM190 is restarted, the call log will be cleared. Select Missed Call Logs to view the missed calls. The SpeedTouchTM190 will only remember the 10 last entries. Note Each time the SpeedTouchTM190 is restarted, the call log will be cleared. E-DOC-CTC-20040401-0004 v1.0 11 2 SpeedTouchTM190 Web Interface Security Select Security to configure the SpeedTouchTM190 user name and password: By default the SpeedTouchTM190 is not protected by a password. However, for security reasons, setting a pssword may be useful. To set a user name and password, proceed as follows: 1 2 3 4 Type a user name in the User name text box. Type a password in the New password text box Retype the password in the Confirm new password text box. Click Save User Password to save the new password. Note Note Use the same procedure to change your user name and password. To clear your user name and password, clear the textboxes and click Save User Password. 12 E-DOC-CTC-20040401-0004 v1.0 3 SpeedTouchTM190 Calling Services 3 SpeedTouchTM190 Calling Services Supported telephone calling services The SpeedTouchTM190 supports the following telephone calling services: · · · Basic Call with Calling Line Identification This feature allows you to see the number of whom is calling you. Call Transfer When there is a call active this feature allows you to transfer an active call. Call Hold and Call Retrieve When there is a call active this feature allows you to put a call on hold and retrieve it back. Call waiting with Calling Line Identification When there is a call active, it is possible that another person calls.This feature allows you to get the waiting call and put the other one automatically on hold and to see the number of whom is trying to call you. Three-way Call When there is a call active and there is another call waiting or on hold it is possible to start a conference call by adding the call on hold to the conversation. · · R key or Flash hook The "R" key is also known as "flash" key and can be emulated by a short tap on the hook. This feature allows you to see the number of whom is calling you. Note This feature is only possible if your phone is Calling Line Identification Presentation (CLIP) enabled and your provider supports it as well. Basic Call with Calling Line Identification Call Transfer To transfer an active call: 1 2 3 4 Press the "R" key on your phone. Press the "4" key on your phone. Wait until you hear a dial tone. Dial the number to transfer the call to. Call Hold and Retrieve To put an active call on hold: 1 2 Press the "R" key on your phone. Press the "1" key on your phone. Note As soon as you hear the dial tone you can dial the second number. When you have put a call on hold, to retrieve the call on hold back: 3 4 Press the "R" key on your phone. Press the "1" key on your phone. E-DOC-CTC-20040401-0004 v1.0 13 3 SpeedTouchTM190 Calling Services Call waiting with Calling Line Identification To get the waiting call and put the other one automatically on hold: 1 2 Press the "R" key on your phone. Press the "*" key on your phone. Press the "R" key on your phone. Press the "*" key on your phone. To toggle between the two calls: 3 4 Three-way Call To start a three-way conference call: 1 2 Press the "R" key on your phone. Press the "7" key on your phone. 14 E-DOC-CTC-20040401-0004 v1.0 © 2004 THOMSON. All rights reserved. E-DOC-CTC-20040401-0004 v1.0 Need more help? Additional help is available online at www.speedtouch.com.