User manual ALESIS MIDIVERB3 PROGRAMCHART

ALESIS MIDIVERB® III PROGRAM CHART REVERBS 000 Chorus-Reverb-Delay-EQ 001 Small Bright Room 1 002 Small Bright Room 2 003 Small Warm Room 004 Small Warm Chamber 005 Small Dark Plate 006 Small Dark Room 007 Small Diffused Room 008 Small Dark Chamber 009 Small Warm Plate 010 Medium Warm Hall 1 011 Medium Warm Hall 2 012 Medium Warm Room 013 Medium Warm Plate 014 Medium Bright Room 015 Medium Dark Chamber 016 Medium Dark Room Chorus 017 Medium Dark Room 018 Medium Warm Room 019 Medium Warm Plate 020 Large Warm Room 1 021 Large Dark Plate 1 022 Large Warm Plate 1 023 Large Dark Plate 2 024 Large Warm Room 2 025 Large Dark Hall 1 026 Large Dark Chamber 027 Large Dark Hall 2 028 Large Warm Plate 2 029 Ex Large Warm Plate GATED AND REVERSE REVERBS 030 Bright Gate 031 Medium Bright Gate 032 Fast Warm Gate 033 Long Warm Gate W/Chorus 034 Long Dark Gate Chorus 035 Reverse Chorus 036 Reverse Regen Chorus 1 037 Reverse Regen Flange 038 Long Reverse Chorus 039 Reverse Regen Chorus 2 CHORUSES AND FLANGES 040 Slow Mono Flange 041 Deep Slow Mono Flange 042 Stereo Flange 043 Slow Deep Stereo Flange 044 Fast Stereo Flange 045 Slow Mono Chorus 046 Fast Mono Chorus 047 Stereo Chorus 048 Deep Slow Stereo Chorus 049 Ultra Chorus DELAYS 050 30ms Delay 051 100ms Delay Regen 052 300ms Delay 053 490ms Delay 054 490ms Delay Regen 055 Chorus Slap Delay 056 Chorus W/Regen Delay 057 Deep Stereo Chrs W/Rgn Dly 058 Lennon Piano Delay 059 Stereo Flange W/Regen Delay EFFECTS 060 Deep St Flange W/Regen Dly 061 Chorused Reverb 062 Reverse Reverb Flange 063 Reverb Flange 064 Chorus Plate 065 Flanged Repeats 066 Chorus Dark Reverb 067 Chorus W/Regen Delay 068 Reverb Mono Flange 069 Stereo Chorus W/Reverb MIDI CONTROLLED 070 Modwheel Reverb W/Flange 071 Velocity Reverb W/Chorus 072 Negative Velocity Delay 073 Positive Velocity Delay 074 Aftrtch Chrs Speed W/Reverb 075 Positive Velocity Reverb 076 Negative Velocity Reverb 077 Sustain Pdl Reverb W/St Chrs 078 Sus Pdl Dly Level W/St Chrs 079 Sus Pdl Dly Regen W/St Chrs SPECIAL EFFECTS 080 Flanged Echo Sax 081 R&B Room Sax 082 Rock&Roll Sax 083 Fanfare 084 Rocky Trumpet 085 Flanger Reverse Echoes 086 Flange Reverse 087 Chorused Hall 088 Chorused Room 089 Chorused Delay Regen 090 Metallic Flanged Reverb 091 Quick Return 092 Darker Tail 093 Short Chorused Reverb 094 Lots Of Chorused Repeats 095 Slap Reverb 096 Dark Chorused Echoes 097 Nice Chorused Reverb 098 Short Chamber Chorus 099 Bright Chorus Reverb The programs in MIDIVERB III have been carefully chosen for their musical usefulness by a group of experts well versed in the art of signal processing. If, however, you wish to alter these SELECTING PROGRAMS 1) Press the PROGRAM button. The Program button LED will light. 2) Press the Up or Down VALUE button until the desired program is displayed in the 3 digit numeric display. OR: 3) Select a 3 digit program number from the numbered Function Buttons. Each digit must be selected within 4 seconds or the initial program will be restored. programs to better suit your needs, MIDIVERB III has a very simple and logical routine for performing edits. Please follow these easy instructions... EDIT COMPARE For convenience, MIDIVERB III has a powerful feature that allows you to compare your edits to the currently stored program before committing them to memory. 1) Exit the Edit mode by pressing the PROGRAM button. The PROGRAM LED will light. The Numeric Display will show the program number you are editing and the Edit Indicator Dot will light. 2) To hear the unedited program, press the PROGRAM button a second time. The Edit Indicator Dot will flash, indicating that you are hearing the unedited program. You may switch back and forth between the edited and unedited versions of the program until you reach a decision; or you can re-enter EDIT mode to further modify your program. When you are satisfied with your edits, follow the directions for SAVING PROGRAMS. SAVING PROGRAMS 1) Press the STORE button. The STORE button LED will flash. The 3 Digit Numeric Display will indicate the program number you are storing to (see NOTE). 2) Press the STORE button again to save the edited program. 3) After saving, MIDIVERB III will return to EDIT mode (EDIT button LED will light). The 3 Digit Numeric Display will show the newly stored parameter. You may now continue editing or return to PROGRAM mode by pressing the PROGRAM button. NOTE: Program numbers 000-099 are non-erasable factory programs. All edits performed on these programs can only be stored in program locations 100-199. Edits to program numbers 000-999 will automatically appear as the chosen program location plus 100. For example, editing program 29 will appear as storable location 129. However, you may choose numbered storable locations from 100-199 as follows: 1) Press the Up or Down value button to select the desired program location. 2) Press the STORE button to save the program. EDITING PROGRAMS 1) Press the EDIT button. Press one of the Function Buttons: its LED will light. The currently stored parameter value will be displayed in the 3 Digit Numeric Display. 2) The Reverb, Delay, Chorus, EQ and Mix buttons each have two parameter choices. Press the EDIT button to toggle between the two choices. The Upper or Lower Function LEDs will light to indicate your choice. 3) Press the Up or Down VALUE button to adjust the parameter. PRINTED IN USA A 027