P R O TURNTABLIST DJ M I X E R USER GUIDE Publication AP4500 Limited One Year Warranty This product has been manufactured in the UK by ALLEN & HEATH and is warranted to be free from defects in materials or workmanship for period of one year from the date of purchase by the original owner. To ensure a high level of performance and reliability for which this equipment has been designed and manufactured, read this User Guide before operating. In the event of a failure, notify and return the defective unit to ALLEN & HEATH or its authorised agent as soon as possible for repair under warranty subject to the following conditions Conditions Of Warranty 1. The equipment has been installed and operated in accordance with the instructions in this User Guide 2. The equipment has not been subject to misuse either intended or accidental, neglect, or alteration other than as described in the User Guide or Service Manual, or approved by ALLEN & HEATH. 3. Any necessary adjustment, alteration or repair has been carried out by ALLEN & HEATH or its authorised agent. 4. This warranty does not cover fader wear and tear. 5. The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its authorised agent with proof of purchase. 6. Units returned should be packed to avoid transit damage. In certain territories the terms may vary. Check with your ALLEN & HEATH agent for any additional warranty which may apply. This product complies with the European Electromagnetic Compatibility directives 89/336/EEC & 92/31/EEC and the European Low Voltage Directives 73/23/EEC & 93/68/EEC. This product has been tested to EN55103 Parts 1 & 2 1996 for use in Environments E1, E2, E3, and E4 to demonstrate compliance with the protection requirements in the European EMC directive 89/336/EEC. During some tests the specified performance figures of the product were affected. This is considered permissible and the product has been passed as acceptable for its intended use. Allen & Heath has a strict policy of ensuring all products are tested to the latest safety and EMC standards. Customers requiring more information about EMC and safety issues can contact Allen & Heath. NOTE: Any changes or modifications to the console not approved by Allen & Heath could void the compliance of the console and therefore the users authority to operate it. XONE:02 User Guide AP4500 Issue 1 Copyright © 2001 Allen & Heath Limited. All rights reserved Whilst we believe the information in this guide to be reliable we do not assume responsibility for inaccuracies. We also reserve the right to make changes in the interest of further product development. Manufactured in the United Kingdom by Allen & Heath Limited Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK http://www.allen-heath.com 2 XONE:02 User Guide Important Safety Instructions ­ Read First Read instructions: Do not open: Power sources: Power cord: Retain these safety and operating instructions for future reference. Adhere to all warnings printed here and on the console. Follow the operating instructions printed in this User Guide. Operate the console with its front and crossfader panels correctly fitted. Disconnect mains power by unplugging the power cord if a panel needs to be removed for servicing. Refer this work to competent technical personnel only. Connect the console to a mains power only of the type described in this User Guide and marked on the rear panel. The power source must provide a good ground connection. Use the power cord with sealed mains plug appropriate for your local mains supply as provided with the console. If the provided plug does not fit into your outlet consult your service agent. Route the power cord so that it is not likely to be walked on, stretched or pinched by items placed upon or against it. Do not defeat the grounding and polarisation means of the power cord plug. Do not remove or tamper with the ground connection in the power cord. Do not obstruct the ventilation slots or position the console where the air flow required for ventilation is impeded. If the console is to be operated in a rack unit or flightcase ensure that it is constructed to allow adequate ventilation. To reduce the risk of fire or electric shock do not expose the console to rain or moisture or use it in damp or wet conditions. Do not place containers of liquids on it which might spill into any openings. Do not locate the console in a place subject to excessive heat or direct sunlight as this could be a fire hazard. Locate the console away from any equipment which produces heat such as power supplies, power amplifiers and heaters. Protect from excessive dirt, dust, heat and vibration when operating and storing. Avoid tobacco ash, drinks spillage, and smoke, especially that associated with smoke machines. To prevent damage to the controls and cosmetics avoid placing heavy objects on the control surface, scratching the surface with sharp objects, or rough handling and vibration. Protect the controls from damage during transit. Use adequate packing if you need to ship the unit. Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, objects fallen into the openings, the power cord or plug become damaged, during lightening storms, or if smoke, odour or noise is noticed. Refer servicing to qualified technical personnel only. Install the console in accordance with the instructions printed in this User Guide. Do not connect the output of power amplifiers directly to the console. Use audio connectors and plugs only for their intended purpose. Grounding: Ventilation: Moisture: Heat: Environment: Handling: Servicing: Installation: Important Mains Plug Wiring Instructions The console is supplied with a moulded mains plug fitted to the AC mains power lead. Follow the instructions below if the mains plug has to be replaced. The wire which is coloured Green/Yellow or Green must be connected to the terminal in the plug which is marked with the letter E or with the Earth symbol. This appliance must be earthed. The wire which is coloured Blue or White must be connected to the terminal in the plug which is marked with the letter N. The wire which is coloured Brown or Black must be connected to the terminal in the plug which is marked with the letter L. Ensure that these colour codes are followed carefully in the event of the plug being changed. XONE:02 User Guide 3 Contents Important Safety Instructions.......................3 Introduction and Quick Start........................4 Connectors and Panel Controls ..................6 Installation and Cable Diagrams................10 Operating Instructions ...............................12 Replacing the Faders.................................15 Repositioning the Transform Switches ......15 Using Effects ............................................. 16 Linking Consoles....................................... 17 Recording .................................................. 17 Specification .............................................. 18 Glossary .................................................... 20 Order Codes.............................................. 22 Tips and Troubleshooting ......................... 23 Introduction Welcome to the XONE:02 professional DJ mixer. This stylish and solidly built dual channel performance mixer presents a unique combination of creative tools for the professional turntablist or battle DJ. Above all, it features a sound quality second to none. XONE:02 has been designed and constructed using the same rigorous standards we apply to our large format professional consoles used and respected by top engineers and performers throughout the world. We have had great fun designing this new range. We are sure you will get even more enjoyment using it. We know you want to get started right away. For this reason we have kept this user guide concise and to the point. We recommend you read it through first. However, if even that is too much then at least read the QUICK START page before you plug up and go. This user guide refers to the XONE:02. For further information on the basic principles of audio system engineering and mixing technique please refer to one of the specialist publications available from bookshops and audio equipment dealers. We are able to offer further product support through our world-wide network of approved dealers and service agents. You can also access our Web site on the Internet for information on our product range, assistance with your technical queries or simply to chat about matters audio. To help us provide the most efficient service please keep a record of your console serial number, and date and place of purchase to be quoted in any communication regarding this product. Check out our home site www.allen-heath.com for information on the company and its pedigree, our full product range and our design philosophy. We also have a site dedicated to the exciting XONE console range www.xone.co.uk. Key Features · · · · · · · · · · · · · · · · Dual stereo channels with mixable A and B inputs featuring independent level control and channel reverse A inputs switchable for line and RIAA phono sources 2 microphone inputs with vocal EQ, effect in/out and independent level control Balanced XLR main mix output with VCA master level control Booth output for local stereo monitoring EFFECT loop with silent FET switching to add external effects Link in and out connections for daisy chaining mixers, recording or booth output 3 Band +6/-26 asymmetric EQ with extended cut VCA PAN controls to adjust LR balance or for performance effect Ultra smooth gold contact dual rail conductive plastic VCA crossfader and channel faders All faders are VCA for noise free operation and have reverse and variable contour controls Rotatable TRANSFORM switches for stutter effects Removable face plate for fader servicing and user preferred transform switch positioning Advanced headphones cue system with cue/mix select, cue crossfader and large meters Sensible performance control layout makes it very easy to use Universal internal power supply for any worldwide mains voltage 4 XONE:02 User Guide Quick Start : 1 Ensure your safety First read and understand the Important Safety Instructions printed earlier. Make sure that all your equipment is set for your local mains supply voltage and correctly grounded to ensure your safety. Do not turn anything on until you have checked your wiring and control settings. 2 Set all controls to their starting position Set channel FADERS, LEVELS, HEADPHONES, BOOTH and VCA MASTER controls minimum (anti-clockwise). Set PAN, EQ and CONTOUR controls centre. Set the CROSSFADER to CH1 and CUE fader to CH1. Set all switches up or out. 3 Plug in your sources and outputs Plug in two music sources, one to CH1 the other to CH2 inputs A. Set the rear switches according to line or RIAA turntable source. Plug the LEFT and RIGHT OUT into the amplifiers feeding the main speakers, the LINK (BOOTH) OUT into the amps feeding the local DJ speakers, and plug in your stereo headphones. It is very important that the amplifier levels are turned right down at this stage. 4 Turn the system on Switch on the mixer and music sources first. Check that the blue POWER indicator turns on. The meters may pulse as the power rails stabilise. This is quite normal. Finally switch on the amplifiers with their level controls turned down. The system should be quiet. 5 Adjust the level trims Start the music playing and raise the INPUT A level control for each channel until its meter reads an average `0' with loud moments at `+5'. If the red `PEAK' indicator flashes then back off the trim slightly. Slowly raise the headphones level control. You should hear the CH1 music signal. Slide the CUE fader across to CH2. You should now hear the CH2 music signal. If it sounds distorted, bassy or thin check that you have plugged it into the correct Line or Phono inputs. 6 Route the music to the main speakers With music playing and crossfader set to CH1, raise the CH1 fader to its top `0' position. Next, raise the VCA MASTER control to maximum. Now slowly raise the amplifier level trim. You should start to hear the music through the main speakers. If you do not then check that the TRANSFORM switches are in their normal off position. Set the amplifiers for the loudest volume you want to allow in the room with console meters reading as described above. Now turn back the master for normal listening level. Move the CROSSFADER to the right and check the CH2 music signal. If you hear any hum or buzz check the system for bad wiring, ground loops or missing grounds, in particular those connecting to turntables. 7 Check the microphone If you are using a microphone then plug it into MIC 1. We recommend you use a cardioid vocal dynamic type. Switch it on by pressing MIC ON and raise its LEVEL control until you hear it in the mix. Turn back t ...