User manual ALPINE CDA-9831R

ENGLISH Contents Operating Instructions WARNING WARNING .................................................. 3 CAUTION ................................................... 3 PRECAUTIONS ......................................... 3 CD/MP3/WMA Playback .......................................................... 11 Playing back a Playlist .................................... 12 Repeat Play ..................................................... 13 M.I.X. (Random Play) .................................... 13 Scanning Programmes .................................... 14 Searching from CD Text ................................... 14 File/Folder Name Search (concerning MP3/ WMA) ........................................................... 14 Quick Search ................................................... 14 About MP3/WMA .......................................... 14 Getting Started Turning Power On and Off ............................... 6 Initial System Start-Up ..................................... 6 Opening and Closing the Movable Display ...... 6 Display Tilt Adjustment .................................... 6 Adjusting Volume ............................................. 6 Lowering Volume Quickly (CDA-9830R only) ........................................ 6 Changing the Display Type (CDA-9831R only) ........................................ 7 Detaching and Attaching the Front Panel ......... 7 Sound Setting Adjusting Balance (Between Left and Right)/ Fader (Between Front and Rear)/Defeat ...... 16 Adjusting and Storing the built-in Crossover ... 16 Recalling the Stored built-in Crossover Settings ....................................... 17 Equalizer Presets ............................................. 17 Adjusting and Storing the Equalizer Curve .... 17 Recalling the Stored Equalizer Curve ............. 17 About Time Correction ................................... 18 Bass Focus ...................................................... 18 Adjusting and Storing the Time Correction .... 20 Recalling the Stored Time Correction Settings ........................................................... 20 Setting the MX Mode ..................................... 20 Radio Listening to Radio ............................................. 7 Manual Storing of Station Presets .................... 8 Automatic Memory of Station Presets .............. 8 Tuning to Preset Stations .................................. 8 Station Title Search Function ............................ 8 Frequency Search Function .............................. 8 RDS Setting RDS Reception Mode and Receiving RDS Stations ................................................. 9 Recalling Preset RDS Stations .......................... 9 Receiving RDS Regional (Local) Stations ....... 9 PI SEEK Setting ................................................ 9 Receiving Traffic Information ........................ 10 PTY (Programme Type) Tuning ..................... 10 Receiving Traffic Information While Playing CD or Radio ................................................. 10 Priority PTY (Programme Type) .................... 11 Displaying Radio Text .................................... 11 Other Functions Displaying the Title/Text ................................. 21 Titling Discs/Stations ...................................... 22 Erasing Disc Title/Station Title ....................... 22 Blackout Mode On and Off ............................. 22 Setting the Multicolour Illumination (CDA-9831R only) ...................................... 22 Changing the Lighting Colour of All the Buttons (CDA-9831R only) ............. 23 Verifying the Software Version ....................... 23 Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and /or other countries. 1-EN SETUP Sound Customizing Adjusting Source Signal Levels ...................... 24 Switching the Tuner Mode .............................. 24 Subwoofer On and Off .................................... 24 Sound (Beep) Guide Function ........................ 24 Visual Customizing Dimmer Control (CDA-9831R only) .............. 24 Scroll Setting ................................................... 24 Adjusting Display Contrast (CDA-9831R only) ...................................... 24 Demonstration ................................................. 24 MP3/WMA Playing MP3/WMA Data ................................ 24 External Device Turning Mute Mode On/Off ........................... 24 Setting the AUX Mode (V-Link) ..................... 24 Connecting to an External Amplifier .............. 25 Setting the Tone Defeat for External Devices ........................................................ 25 Installation and Connections Warning ........................................................... 32 Caution ............................................................ 32 Precautions ...................................................... 32 Installation ...................................................... 33 Connections ...................................................... 34 MobileHubTM Link Operation (Optional) About MobileHubTM Link .............................. 26 Telephone Mode ON/OFF .............................. 26 Incoming Calls ................................................ 26 Setting the Automatic Calling ......................... 26 Calling ............................................................. 27 SMS (Short Message Service) Operation ....... 27 Changer (Optional) Controlling CD Changer (Optional) ............... 28 Playing MP3 Files with the CD Changer (Optional) .................................................... 28 Multi-Changer Selection (Optional) ............... 28 Information In Case of Difficulty ....................................... 29 Specifications .................................................. 31 2-EN Operating Instructions WARNING WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident. DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY. When inserting the batteries, be sure to observe proper polarity (+ and ­) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury. KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING. Failure to do so may result in an accident. KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT PANEL OR MOVING MONITOR IS IN MOTION. Failure to do so may result in personal injury or damage to the product. DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc. PRECAUTIONS Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. Temperature Be sure the temperature inside the vehicle is between +60°C (+140°F) and ­10°C (+14°F) before turning your unit on. DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire. Moisture Condensation You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. Damaged Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism. DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product. Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing. 3-EN PRECAUTIONS Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc. CORRECT INCORRECT CORRECT Inserting Discs Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. Your player will automatically eject any disc that is inserted incorrectly. If the player continues to eject a correctly inserted disc, push the RESET switch with a pointed object such as a ballpoint pen. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player. Disc Cleaning Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc. New Discs As a protective measure to prevent the CD from jamming, the CD player will automatically eject discs with irregular surfaces or inserted incorrectly. When a new disc is inserted into the player and ejected after initial loading, using your finger, feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again. Centre Hole Centre Hole New Disc Disc Accessories There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players. Bumps Outside (Bumps) Transparent Sheet Disc Stabilizer Irregular Shaped Discs Be sure to use round shape discs only for this unit and never use any special shape discs. Use of special shape discs may cause damage to the mechanism. Installation Location Make sure the CDA-9831R/CDA-9830R will not be installed in a location subjected to: · · · · Direct sun and heat High humidity and water Excessive dust Excessive vibrations 4-EN On handling Compact Discs (CD/CD-R/CD-RW) · · · · · · Do not touch the surface. Do not expose the disc to direct sunlight. Do not affix stickers or labels. Clean the disc when it is dusty. Make sure that there are no bumps around the disc. Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again. To customers using CD-R/CD-RW · · If a CD-R/CD-RW cannot be played back, make sure the last recording session was closed (finalized). Finalize the CD-R/CD-RW if necessary, and attempt playback again. About media that can be played. Use only compact discs with the label side showing the CD logo marks below. If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA formatted audio files. · Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted, copyprotected CDs which do not conform to the audio CD industry standard. Use discs with MP3/WMA files written in a format compatible with this unit. For details, see page 14-15. · 5-EN Getting Started SOURCE/ POWER DISP/B.OUT (CDA-9831R) MUTE/B.OUT (CDA-9830R) Rotary encoder Display Tilt Adjustment Movable display The movable display may be adjusted to 3 different tilt angles depending upon user preference. Press TILT 98 to adjust the tilt angle of the movable display. · The display will close a half minute after the ignition key is turned to the OFF position. · The adjusted tilt angle of the display is stored in memory. There is no need to re-adjust the tilt angle when the power is turned back on. Caution Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch. RESET TILT 98 c Turning Power On and Off Press SOURCE/POWER to turn on the unit. · The unit can be turned on by pressing any other button except eject c. Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit. · The first time power is turned on, the volume will start from level 12. Adjusting Volume Turn the Rotary encoder until the desired sound is obtained. Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, after changing the car battery, etc. Lowering Volume Quickly (CDA-9830R only) Activating the Audio Mute function will instantly lower the volume level by 20 dB. 1 2 Turn off the unit power. Press RESET with a ball-point pen or similar pointed object. Press MUTE/B.OUT to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing MUTE/B.OUT again will bring the audio back to its previous level. Opening and Closing the Movable Display Press c. The movable display will open. Controllable With Remote Control The CDA-9831R/CDA-9830R can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote control sensor. Remote control sensor To close the movable display, press c again. The movable display will close. · Do not apply shock to the movable display when it is open as it may result in malfunction of the unit. · The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses. · The display will stop at the set tilt angle when closing. Caution Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch. Connectable to Remote Control Interface Box You can operate this unit from the vehicle's control unit when an Alpine Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer. 6-EN Changing the Display Type (CDA-9831R only) There are three selectable display types. You can also deactivate the display. Radio SOURCE/ POWER TUNE/ A.ME BAND/ TEL. Rotary encoder Press DISP/B.OUT to switch the display type. Type1 Type2 Type3 OFF Type1 Type1 : The indicator on the left changes in a fixed sequence. Type2 : The indicator on the left changes according to the setting (see "Setting the Multicolour Illumination" on page 22). Type3 : The indicator on the left changes according to audio level. Detaching and Attaching the Front Panel Detaching g f SEARCH/Q.S. F Preset buttons (1 through 6) 1 2 3 Turn off the unit power. Press (Release) at the upper left side until the front panel pops out. Grasp the left side of the front panel and pull it out. Listening to Radio 1 2 3 Press SOURCE/POWER until a radio frequency appears in the display. Press BAND/TEL. repeatedly until the desired radio band is displayed. FM1 (F1) FM2 (F2) FM3 (F3) MW LW FM1 (F1) · The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction. · To protect the front panel, place it in the supplied carrying case. Press TUNE/A.ME to select the tuning mode. DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK · The initial mode is Distance mode. Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning). Attaching 1 2 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. Push the left side of the front panel until it locks firmly into the main unit. 2 1 4 Press g or f to tune in the desired station. Holding down g or f will change the frequency continuously. · The ST indicator appears on the display when a stereo FM station is tuned in. · Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. · Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. 7-EN Manual Storing of Station Presets Station Title Search Function If the title of a radio station is entered, you can search for that radio station by its title while listening to the currently received radio station. 1 2 Select the radio band and tune in a desired radio station you wish to store in the preset memory. Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) that you want to store the station on. The selected station is stored. The display shows the band, preset no. and station frequency memorized. 1 2 3 Press SEARCH/Q.S. Title Search mode. in Radio mode to switch to The first title input blinks in the display. Select the desired title by turning the Rotary encoder within 10 seconds. Press the Rotary encoder to receive the frequency of the selected title. · A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW). · If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. · If the "FUNC" indicator is illuminated, turn off the indicator by pressing F, then you can perform the operation. Automatic Memory of Station Presets · Search mode in Title Search mode is cancelled by pressing and holding SEARCH/Q.S. for at least 2 seconds. · If a station has no title, "NO TITLE" is displayed for 2 seconds. · Any radio station can be searched by the Station Title Search function. The station titles are displayed in the order they were input. 1 2 Press BAND/TEL. repeatedly until the desired radio band is displayed. Press and hold TUNE/A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location no. 1. Frequency Search Function You can search for a radio station by its frequency. 1 2 3 Press and hold SEARCH/Q.S. for at least 2 seconds in Radio mode to activate Frequency Search mode. Turn the Rotary encoder within 10 seconds to select the desired frequency. Press the Rotary encoder to receive the selected frequency. · If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Tuning to Preset Stations · Search mode in Frequency Search mode is cancelled by pressing and holding SEARCH/Q.S. for at least 2 seconds. 1 2 Press BAND/TEL. repeatedly until the desired band is displayed. Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. · If the "FUNC" indicator is illuminated, turn off the indicator by pressing F, then you can perform the operation. 8-EN RDS g f TITLE Rotary encoder 4 Make sure that the "FUNC" indicator light goes out, then press the preset button in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. 5 If the preset station and the stations in the AF list cannot be received: When the PI SEEK setting is on (refer to "PI SEEK Setting" on this page), the unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset no. disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district. MENU T.INFO F 1/AF 2/P.PTY 3/PTY Setting RDS Reception Mode and Receiving RDS Stations The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. · For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the FM1, FM2 and FM3 bands only. Receiving RDS Regional (Local) Stations 1 2 3 4 Press MENU to select the SETUP mode. SETUP mode is activated. 1 2 3 4 5 Press F so that the "FUNC" indicator lights up. Press 1/AF to activate the RDS mode. Press g or f to tune in the desired RDS station. Press 1/AF again to deactivate the RDS mode. Press F to activate the normal mode. The "FUNC" indicator goes out. Press g or f to select the RDSREG (REG for CDA-9830R) mode. Turn the Rotary encoder to select ON or OFF. In the OFF mode, the unit automatically keeps receiving the related local RDS station. Press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode. · When the unit receives the PTY31 (Emergency Broadcast) signal, the unit will show "ALARM" in the display automatically. The RDS digital data includes the following: PI Programme Identification PS Programme Service Name AF List of Alternative Frequencies TP Traffic Programme TA Traffic Announcement PTY Programme Type EON Enhanced Other Networks PI SEEK Setting 1 2 3 4 Press MENU to select the SETUP mode. SETUP mode is activated. Press g or f to select "PI"("PISK" for CDA9830R). Turn the Rotary encoder to select ON or OFF. Press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode. Recalling Preset RDS Stations 1 2 3 Press F so that the "FUNC" indicator lights up. Press 1/AF to activate the RDS mode. Press F to activate the normal mode. The "FUNC" indicator goes out. 9-EN Receiving Traffic Information 4 1 2 Press T.INFO so that the "T.INFO" indicator lights up. Press g or f to select your desired traffic information station. When a traffic information station is tuned in, the "TP" indicator lights up. Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRF-INFO" for a few seconds and returns to the PS display. When the traffic information broadcast is over, the unit will automatically set in the standby mode. Press 3/PTY within 5 seconds after selecting the programme type to start searching for a station in the selected programme type. The chosen programme type display blinks during searching and lights when a station is found. If no PTY station is found, "NO PTY" will be displayed for 5 seconds. 5 Press F to activate the normal mode. The "FUNC" indicator goes out. · Operate the unit while the "FUNC" indicator lights up. If no operation is performed within 5 seconds, the "FUNC" indicator goes out. Receiving Traffic Information While Playing CD or Radio · If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 70 seconds. If the signal remains below a certain level for over 70 seconds, the "T.INFO" indicator blinks. · If you do not want to listen to the traffic information being received, lightly press T.INFO to skip that traffic information message. The T.INFO mode will remain in the ON position to receive the next traffic information message. · If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized. · In the T.INFO mode, the SEEK tuning selects only the TP stations. 1 2 Press T.INFO so that the "T.INFO" indicator lights up. Press g and f to select a traffic information station if necessary. When a traffic information broadcast starts, the unit automatically mutes the CD player/changer or the regular FM broadcast. When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. PTY (Programme Type) Tuning When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received for over 70 seconds, the "T.INFO" indicator blinks. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. · The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. The "EON" indicator lights up while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. 1 2 Press F so that the "FUNC" indicator lights up. Press 3/PTY to activate the PTY mode, while the unit is in Radio (FM receiving) mode. The Programme Type of the station being currently received will be displayed for 5 seconds. If there is no receivable PTY broadcast, "NO PTY" will be displayed for 5 seconds. If no RDS station can be received, the display shows "NO PTY." · If no operation is performed within 5 seconds after pressing PTY, the PTY mode will be automatically cancelled. 3 Press g and f within 5 seconds after activating the PTY mode to choose the desired programme type while the PTY (programme type) is being displayed. Each press scrolls the programme type by one. LIGHT M CLASSICS OTHER M 3 Press T.INFO to deactivate the Traffic Information mode. The "T.INFO" indicator goes out. 10-EN Priority PTY (Programme Type) This function allows presetting of a programme type such as music category, news, etc. You can listen to a programme in the preset programme type as the unit automatically gives priority to the preset programme type when it begins broadcasting, and interrupts the programme you are currently listening. This feature is functional when your unit is set to a mode other than the LW and MW. CD/MP3/WMA SOURCE/ POWER -/J TITLE 8 SEARCH/Q.S. c 1 2 Press F so that the "FUNC" indicator lights up. Press 2/P.PTY to activate the PRIORITY PTY mode. "PRIO-PTY" is displayed for 2 seconds and then the programme type for 3 seconds. The initial setting is "NEWS." g f Rotary encoder F 9 4( ) 5( ) 6( ) · If no operation is performed within 5 seconds after pressing 2/P.PTY, the PRIORITY PTY mode is automatically cancelled. 3 4 Playback Press g or f within 5 seconds while "NEWS" is being displayed to choose a desired programme type. Then press 2/P.PTY. The PRIORITY PTY function will activate. 1 2 Press c. The movable display will open. Press 2/P.PTY to activate the PRIORITY PTY mode again. To change the programme category, perform the step 3. To disable the PRIORITY PTY function, press and hold 2/P. PTY for at least 2 seconds. Insert a disc with the label side facing up. The disc will be pulled into the unit automatically. · In the PRIORITY PTY function, unlike in the T.INFO function, the volume does not increase during operation. 5 Press F to activate the normal mode. The "FUNC" indicator goes out. · Operate the unit while the"FUNC" indicator lights up. If no buttons are pressed within 5 seconds, the "FUNC" indicator goes out. The movable display will close and playback will begin. When a disc is already inserted, press SOURCE/POWER to switch to the CD mode. The mode will change every time the button is pressed. TUNER CD CD CHANGER* TUNER Displaying Radio Text Text messages from a radio station can be displayed. * Only when the CD changer is connected 3 4 1 While playing back MP3/WMA, press 8 or 9 to select desired folder. Holding down 8 or 9 will change folders continuously. Press TITLE while receiving FM in the radio mode to select the Radio Text display. The display will change every time the button is pressed. PS (Programme Service Name) Radio Text STATION TITLE FREQUENCY PS (Programme Service Name) Press g or f to select the desired track (file). Returning to the beginning of the current track (file): Press g. Fast backward : Press and hold g. Advancing to the beginning of the next track (file) : Press f. Fast forward : Press and hold f. The display shows "WAITING" for a few seconds, then starts scrolling the text message. · If there is no receivable text message or the unit cannot receive a text message properly, the display shows "NO TEXT." 5 To pause playback, press -/J. Pressing -/J again will resume playback. Continued 11-EN 6 To eject the disc, press c. Playing back a Playlist You can play playlists you have prepared in advance on the computer. Both MP3 and WMA playlists can be played. Playlists that can be played back by this device have the file extension "m3u"/"asx." · Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. · If the CD does not eject, press and hold c for at least 2 seconds with the movable display open. · The CD-player can play discs containing audio data, MP3 data and WMA data. · A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit. · "MP3" is displayed during MP3 playback. · "WMA" is displayed during WMA playback. · The track display for MP3/WMA data playback is the file numbers recorded on the disc. · If the HDA-5460 model is connected to the unit, some operations (for example changing the source, selecting the file by holding buttons up or down, etc.), can be carried out on this unit. Press 8 or 9 to select a playlist. By pressing and holding 8 or 9, the playlists move up or down continuously. · If there is a playlist and folder on the disc, the playlist starts to play back prior to the folder. · Up to 5 playlist can be played back. Playlists from the 6th onwards cannot be played back. · Refer to the software instruction manual on how to create a playlist. MP3/WMA Play Display CDA-9831R The folder number, file number, sampling rate, and bit rate will be displayed as described below. File number display Playlist Display While playing back a playlist, the folder and file numbers that are stored in the playlist are displayed. CDA-9831R P-LIST 44.1kHz 01 03 CDA-9830R 03 05 Sampling rate Folder number display display The sampling rate and the bit rate (frame display) are alternately displayed. P-L F03 T05 File number display 160 kbps Bit rate display 01 03 Folder number display CDA-9830R The folder number and file number will be displayed as described below. F01 T03 Folder number File number display display · Press TITLE to switch the display. Please see "Displaying the Title/Text" (page 21) for information about display switching. 12-EN Repeat Play Press 4( played. Press 4( M.I.X. (Random Play) Press 5( ) in the play or pause mode. The tracks (files) on the disc will be played back in random sequence. To cancel M.I.X. play, press 5( ) again. ) to play back repeatedly the track being The track (file) will be played repeatedly. ) again and select OFF to deactivate repeat play. CD mode : RPT : Only a track is repeatedly played back *1 RPT : A disc is repeatedly played back (off) CD mode : M.I.X.: *3 Track are played back in random sequence. *1 When a CD changer is connected · If REPEAT is set to ON during M.I.X. play in CD changer mode, M.I.X. will apply to the current disc only. (off) M.I.X.:The tracks on all the CDs in the current magazine will be included in the random playback sequence. MP3/WMA mode : RPT : Only a file is repeatedly played back RPT : Only files in a folder are repeatedly played back *2 RPT : A disc is repeatedly played back (off) *2 When an MP3 compatible CD changer is connected · If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F to illuminate the "FUNC" indicator, and go to the step above within 5 seconds. · If a 12-disc CD changer is connected: In CD changer mode, press F twice to illuminate the "FUNC" indicator, and go to the step above within 5 seconds. *3 When a CD changer equipped with the All M.I.X. function is connected · If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD changer mode, M.I.X. will apply to the current disc only. MP3/WMA mode : M.I.X.: Only files in a folder are played back in random sequence. M.I.X.: Files are played back in random sequence. If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc. (off) · If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F to illuminate the "FUNC" indicator, and go to the step above within 5 seconds. · If a 12-disc CD changer is connected: In CD changer mode, press F twice to illuminate the "FUNC" indicator, and go to the step above within 5 seconds. · When playing back a playlist, M.I.X. cannot be played. 13-EN Scanning Programmes Press 6( ) to activate the Scan mode. The first 10 seconds of each track (file) will be played back in succession. To stop scanning, press 6( mode. ) and deactivate the Scan Folder Name Search mode 2 3 Turn the Rotary encoder within 10 seconds to select the desired folder or playlist. Press the Rotary encoder to play back the first file in the selected folder or playlist. · If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F to illuminate the "FUNC" indicator, and go to the step above within 5 seconds. · If a 12-disc CD changer is connected: In CD changer mode, press F twice to illuminate the "FUNC" indicator, and go to the step above within 5 seconds. · Search mode is cancelled by pressing and holding SEARCH/Q.S. for at least 2 seconds in Folder Name Search mode. · While in Folder Name Search mode, press SEARCH/Q.S. to switch to File Name Search mode. · "NO FILE" is displayed for 2 seconds if the folder or playlist that is selected by the Folder Name Search mode contains no files. · "0 (zero)" is displayed for the root folder. · Folder Name search cannot be made during M.I.X. play. Searching from CD Text Tracks can be searched and played using the CD text on the disk. In the case of discs and changers that do not support text, searches can be made using the track numbers. Quick Search You can search for tracks (files). 1 2 1 2 Press SEARCH/Q.S. during play. Press and hold SEARCH/Q.S. for at least 2 seconds in the CD/Changer/MP3/WMA mode to activate Quick Search mode. Turn the Rotary encoder within 10 seconds to select a desired track (file). The selected track is played back immediately. This will set the search mode. Turn the Rotary encoder to select the desired track, then press the Rotary encoder. This will play the selected track. for at least 2 seconds in the · Press and hold SEARCH/Q.S. search mode to cancel. Or, the search mode will be cancelled when an operation has not been performed in 10 seconds. · CD text search cannot be made during M.I.X. play. · Search mode is cancelled by pressing and holding for at least 2 seconds in Quick Search mode. SEARCH/Q.S. About MP3/WMA CAUTION Except for private use, duplicating audio data (including MP3/ WMA data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty. What is MP3? File/Folder Name Search (concerning MP3/ WMA) You can display and search for the folder and file name while listening to the file currently being played back. 1 Press SEARCH/Q.S. to select File Name Search mode or Folder Name Search mode in MP3/WMA mode. File Name Search mode MP3, whose official name is "MPEG-1 Audio Layer 3," is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC. MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds. 2 3 4 Press 8 or 9 to select another Folder or playlist. Select the desired file by turning the Rotary encoder within 10 seconds. Press the Rotary encoder to play back the selected file. What is WMA? WMA, or "Windows MediaTM Audio," is compressed audio data. WMA allows you to create music files and store them at higher ratios of compression than MP3 audio data (approx. half original size). This is achieved while still maintaining CD quality sound. · File Name Search mode is cancelled by pressing and holding SEARCH/Q.S. for at least 2 seconds. · While in File Name Search mode, press SEARCH/Q.S. to switch to Folder Name Search mode. · File Name Search cannot be made during M.I.X. play. · File Name Search cannot be made while playing back a playlist. Method for creating MP3/WMA files Audio data is compressed by using MP3/WMA specified software. For details on creating MP3/WMA files, refer to the user's manual for that software. MP3/WMA files that can be played back by this device have the file extension "mp3" / "wma". Files with no extension cannot be played back. (WMA ver. 7.1 and 8 are supported) 14-EN Supported playback sampling rates and bit rates MP3 Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps WMA Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz Bit rates: 48 - 192 kbps Note that for sampling rates, this device's frame display (Page 21) may not display correctly. This device may not play back correctly depending on sampling rates. Order of files The unit plays the files in the order that the writing software writes them. Therefore, the playing order may not be the same as the order you input. The playback order of the folders and files is as follows. However, the folder and file playback order differs from the folder no. and file no. indicated on the display. 0 Root Folder 1 2 ID3 tags/WMA tags This device supports ID3 tag v1 and v2, and WMA tag. If tag data is in an MP3/WMA file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data. This device can only display single-byte alphanumeric characters (up to 30 for ID3 tags and up to 15 for WMA tags) and the underscore. For non-supported characters, "NO SUPPORT" ("NO SUPRT" for CDA-9830R) is displayed. 2 3 4 3 4 5 5 7 1 6 Producing MP3/WMA discs MP3/WMA files are prepared, then written to a CD-R or CDRW using CD-R writing software. A disc can hold up to 256 folders and 999 files (including Root Folders). Media supported The media that this device can play back are CD-ROMs, CDRs, and CD-RWs. Corresponding File Systems This device supports discs formatted with ISO9660 Level 1 or Level 2. Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). File/folder names are limited to 30 characters (including the extension). Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and `_' (underscore). This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly. Folder MP3/WMA File Terminology Bit rate This is the "sound" compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files. Sampling rate This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data. Encoding Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format. Tag Song information such as track titles, artist names, album names, etc., written into MP3/WMA files. MP3: ID3 tag WMA: WMA tag Root folder The root folder is found at the top of the file system. The root folder contains all folders and files. Formats supported This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing. 15-EN Sound Setting SOURCE/ POWER BAND/ TEL. Rotary encoder Adjusting and Storing the built-in Crossover The High and Low Pass Filters on this unit can be adjusted to suit your personal taste. 1 2 3 Press and hold MENU for at least 2 seconds. Press MENU to select HPF/LPF. Press BAND/TEL. to change the setting mode. HPF LPF* * When the subwoofer output of this unit is turned off, LPF and phase are deactivated. g MENU MX f Preset buttons (1 or 2) 4 Turn the Rotary encoder to select the desired setting. Adjusting Balance (Between Left and Right)/ Fader (Between Front and Rear)/Defeat HPF (Setting the High Pass Filter): FLAT (OFF) 80Hz 120Hz 160Hz All frequencies above the selected cutoff are output. 1 Press Rotary encoder repeatedly to choose the desired mode. Each press changes the modes as follows: SUBWOOFER*1 BALANCE FADER DEFEAT VOLUME SUBWOOFER*1 Subwoofer : 0 ~ +15 Balance : L15 ~ R15 Fader : R15 ~ F15 Defeat : ON/OFF Volume : 0 ~ 35 LPF (Setting the Low Pass Filter): FLAT (OFF) 80Hz 120Hz 160Hz All frequencies below the selected cutoff are output. (Only available when using the subwoofer output from this unit.) To store the adjusted contents 1) Press and hold, for at least 2 seconds, the preset buttons (1 or 2) into which you wish to store the adjusted contents. 5 6 Press the Rotary encoder to confirm the adjusted contents. The adjusted contents are not stored if the Rotary encoder is not pressed. Press g or f after selecting the Subwoofer mode, and the subwoofer output phase is toggled NORMAL (PHASE 0°) or REVERS (PHASE 180°). · If the Rotary encoder is not pressed within 5 seconds after selecting the BALANCE, FADER, DEFEAT or SUBWOOFER mode, the unit automatically returns to normal mode. *1 When the subwoofer mode is set to OFF, its level and phase cannot be adjusted. After setting, press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode. 2 Turn the Rotary encoder until the desired sound is obtained in each mode. By setting Defeat ON, previously adjusted setting of EQ will return to the factory defaults and MX is turned off. · The setting mode returns to normal mode if no buttons are pressed within 15 seconds. · These functions are inoperative when an external, Ai-NET processor is connected. · Except when the HPF and LPF are turned to OFF, the subwoofer is in monaural mode. · When the subwoofer is set to OFF, LPF mode and change of phase does not work. · Depending on the connected devices, some functions and display indications do not work. 16-EN Recalling the Stored built-in Crossover Settings 4 Press g or f to select your desired frequency. Adjustable frequency bands: BAND1 : 40Hz, 60Hz, 90Hz BAND2 : 100Hz, 150Hz, 200Hz BAND3 : 500Hz, 700Hz, 1kHz, 2kHz, 4kHz, 6kHz BAND4 : 10kHz, 12.5kHz, 15kHz 1 2 3 4 Press and hold MENU for at least 2 seconds. Press MENU to select HPF/LPF. Press the preset button (1 or 2) to which your desired built-in crossover settings are assigned. Press and hold MENU for at least 2 seconds to return to normal mode, or press MENU and select RETURN to return to normal mode. 5 6 Turn the Rotary encoder to adjust the level. Press SOURCE/POWER to select your desired band width (Q). Adjustable band width: BAND1 : 1.0, 2.0, 3.0, BAND2 : 1.0, 1.5, 2.0 BAND3 : 1.0, 2.0, 3.0 BAND4 : 1.0 (fixed band width) · The setting mode returns to normal mode if no buttons are pressed within 15 seconds. Equalizer Presets 10 typical equalizer settings are preset at the factory for a variety of musical source material. To store the adjusted curve 1) Press and hold, for at least 2 seconds, the preset buttons (1 or 2) into which you wish to store the adjusted curve. 1 2 Press MENU to select Factory's EQ (P-EQ for CDA9830R). Press either g or f. With each press of the button, the equalizer mode will display the selected equalizer characteristic.