User manual ALPINE CDA-9883R

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R RDS MP3/WMA/AAC CD Receiver EN CDA-9883R DE · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. · ISTRUZIONI PER L 'USO Si prega di leggere prima di utilizzare il attrezzatura. · ANVÄNDARHANDLEDNING Innan du använder utrustningen bör du läsa igenom denna användarhandledning. ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U.K. LTD. Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K. Phone 0870-33 33 763 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPAÑA, S.A. Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588 ALPINE ELECTRONICS (BENELUX) GmbH Leuvensesteenweg 510-B6, 1930 Zaventem, Belgium Phone 02-725-13 15 FR ES IT SE YAMAGATA (Wuxi) Co., Ltd. Block 28-25, Changjiang Nanlu, WND, jiangsu, China Designed by ALPINE Japan Printed in China (Y) 68-08564Z11-A ENGLISH Contents Operating Instructions WARNING WARNING ................................................. 3 CAUTION .................................................. 3 PRECAUTIONS ........................................ 3 CD/MP3/WMA/AAC Playback .......................................................... 12 Repeat Play ..................................................... 13 M.I.X. (Random Play) .................................... 13 Searching from CD Text ................................. 13 File/Folder Name Search (concerning MP3/WMA/AAC) ................... 13 Quick Search ................................................... 14 About MP3/WMA/AAC ................................. 14 Getting Started Accessory List .................................................. 6 Turning Power On and Off ............................... 6 Detaching and Attaching the Front Panel ........ 6 Initial System Start-Up ..................................... 7 Adjusting Volume ............................................. 7 Sound Setting Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat .......................................................... 16 Setting the Bass Control ................................. 16 Setting the Treble Control ............................... 17 Adjusting the High Pass Filter ........................ 17 Turning Loudness On/Off ............................... 17 Radio Listening to Radio ............................................ 8 Presetting Stations Manually ............................ 8 Presetting Stations Automatically .................... 8 Tuning to Preset Stations .................................. 8 Frequency Search Function .............................. 8 Other Functions Displaying the Text ......................................... 18 SETUP BLUETOOTH IN Setting the Bluetooth Connection ....................19 RDS Setting RDS Reception Mode and Receiving RDS Stations ................................................. 9 Recalling Preset RDS Stations ......................... 9 Receiving RDS Regional (Local) Stations ....... 9 PI SEEK Setting ............................................... 9 Setting PTY31 (Emergency Broadcast) reception ...................................................... 10 Receiving Traffic Information ........................ 10 PTY (Programme Type) Tuning ..................... 10 Receiving Traffic Information While Playing CD or Radio ................................................ 11 Priority News .................................................. 11 Displaying Radio Text .................................... 11 Sound Customizing Adjusting Source Signal Levels .......................19 Subwoofer On and Off .....................................19 Setting the Subwoofer System .........................19 Visual Customizing Changing Lighting Colour ...............................20 Adjusting Display Contrast ..............................20 Dimmer Control ...............................................20 Scroll Type Setting ...........................................20 Scroll Setting (TEXT SCROLL) ......................20 Setting the Language Font ................................20 Demonstration ..................................................20 1-EN MP3/WMA/AAC Playing MP3/WMA/AAC Data (PLAY MODE) ............................................ 20 External Device Connecting to an External Amplifier ............... 21 Turning Mute Mode On / Off (INT MUTE) .... 21 Setting the AUX+ Mode .................................. 21 General Setting the AUX Mode (V-Link) ..................... 21 Setting the External Digital Input (DIGITAL AUX) .......................................... 21 Setting Adaptive Steering Remote Control ...... 21 iPod® (Optional) Playback .......................................................... 22 Searching for a desired Song .......................... 23 Quick Search ................................................... 23 Direct Search Function ................................... 24 Select Playlist/Artist/Album/Podcast/Genre/ Composer .................................................... 24 Random Play Shuffle (M.I.X.) ...................... 24 Repeat Play ..................................................... 25 Displaying the Text ......................................... 25 Changer (Optional) Controlling CD Changer (Optional) ............... 26 Playing MP3 Files with the CD Changer (Optional) .................................................... 26 Multi-Changer Selection (Optional) ............... 26 Information In Case of Difficulty ....................................... 27 Specifications .................................................. 29 Installation and Connections Warning .................................................. 30 Caution ................................................... 30 Precautions ............................................ 30 Installation ...................................................... 31 Connections .................................................... 32 2-EN Operating Instructions WARNING WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident. CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. PRECAUTIONS Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING. Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE. Temperature Be sure the temperature inside the vehicle is between +60°C (+140°F) and ­10°C (+14°F) before turning your unit on. Moisture Condensation You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate. DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc. Damaged Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism. KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product. 3-EN Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc. CORRECT INCORRECT CORRECT Inserting Discs Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. "ERROR" will be displayed on your player if you insert a disc incorrectly. If "ERROR" continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player. Disc Cleaning Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc. New Discs To prevent the CD from jamming, "ERROR" is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again. Centre Hole Centre Hole New Disc Disc Accessories There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players. Bumps Outside (Bumps) Transparent Sheet Disc Stabilizer Irregular Shaped Discs Be sure to use round shape discs only for this unit and never use any special shape discs. Use of special shape discs may cause damage to the mechanism. Installation Location Make sure this unit will not be installed in a location subjected to: · · · · Direct sun and heat High humidity and water Excessive dust Excessive vibrations 4-EN On handling Compact Discs (CD/CD-R/CD-RW) · · · · · · Do not touch the surface. Do not expose the disc to direct sunlight. Do not affix stickers or labels. Clean the disc when it is dusty. Make sure that there are no bumps around the disc. Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again. To customers using CD-R/CD-RW · If a CD-R/CD-RW cannot be played back, make sure the last recording session was closed (finalized). · Finalize the CD-R/CD-RW if necessary, and attempt playback again. · Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. · Apple, the Apple logo, iPod and iTunes are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. · "MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson." · "Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www. mp3licensing.com" About media that can be played Use only compact discs with the label side showing the CD logo marks below. If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordables)/CD-RWs (CDReWritables) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC formatted audio files. · Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), CDs recorded under unstable conditions, CDs on which a recording failed or a re-recording was attempted, copy-protected CDs which do not conform to the audio CD industry standard. · Use discs with MP3/WMA/AAC files written in a format compatible with this unit. For details, see pages 14-15. · ROM data other than audio files contained in a disc will not produce sound when played back. 5-EN Getting Started Rotary encoder (OPEN) SOURCE/ Detaching 1 2 Turn off the unit power. Press (OPEN) to open the front panel. To close the front panel, press the left side until it locks as shown in the figure below. Accessory List · · · · · · · · Head unit ............................................................................1 Power cable........................................................................1 Mounting sleeve.................................................................1 Carrying case .....................................................................1 Rubber Cap ........................................................................1 Hex Bolt ..............................................................................1 Screw (M5 × 8)....................................................................4 Owner's Manual .......................................................... 1 set 3 Grasp the front panel firmly, slide to the left then pull to remove. , and Turning Power On and Off Press SOURCE/ to turn on the unit. · The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. · To protect the front panel, place it in the supplied carrying case. · When detaching the front panel, do not apply excessive force as it may result in malfunction and damages. · Do not leave the front panel open, or drive the car with the panel open as it may result in an accident or malfunction. · The unit can be turned on by pressing any other button except (OPEN) and Rotary encoder. Press and hold SOURCE/ turn off the unit. for at least 2 seconds to · The first time power is turned on, the volume will start from level 12. Detaching and Attaching the Front Panel Be sure to push the Rotary encoder inside the unit before opening the front panel so that the front panel will open completely, otherwise it may be damaged. Attaching 1 2 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. Push the left side of the front panel until it locks firmly into the main unit. Push the Rotary encoder inside When you push the Rotary encoder again, it pops back out. The Rotary encoder pops out · Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. · Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. 6-EN Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 2 3 Turn off the unit power. Press (OPEN) to open the front panel, and then remove it. Press RESET with a ballpoint pen or similar pointed object. RESET switch Adjusting Volume Turn the Rotary encoder until the desired sound is obtained. Controllable With Remote Control This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote control sensor. Remote control sensor Connectable to Remote Control Interface Box This unit may be controlled from the vehicle's audio controls. An optional Alpine Remote Control Interface Box must be used. For details, contact your Alpine dealer. 7-EN Radio / /ENT Rotary encoder TUNE/A.ME SOURCE/ BAND/TA Presetting Stations Automatically 1 2 Press BAND/TA repeatedly until the desired radio band is displayed. Press and hold TUNE/A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No. 1. /ESC FUNC./ SETUP Preset buttons (1 through 6) · If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Listening to Radio Tuning to Preset Stations 1 2 3 Press SOURCE/ to select the TUNER mode. 1 2 Press BAND/TA repeatedly until the desired band is displayed. Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. Press BAND/TA repeatedly until the desired radio band is displayed. F1 F2 F3 MW LW F1 Press TUNE/A.ME to select the tuning mode. DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK · If the audio function mode is activated, press FUNC./SETUP to return to preset mode. · The initial mode is Distance mode. Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning). Frequency Search Function You can search for a radio station by its frequency. 1 2 3 Press and hold /ESC for at least 2 seconds in Radio mode to activate Frequency search mode. Turn the Rotary encoder to select the desired frequency. Press / /ENT to receive the selected frequency. 4 Press or to tune in the desired station. or will change the frequency Holding down continuously. Presetting Stations Manually · Press and hold /ESC for at least 2 seconds in the search mode to cancel. Or, the search mode will be cancelled if no operation is performed for 10 seconds. 1 2 Select the radio band and tune in a desired radio station you wish to store in the preset memory. Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The selected station is stored. The display shows the band, preset number and station frequency memorized. · A total of 30 stations can be stored in the preset memory (6 stations for each band; F1, F2, F3, MW and LW). · If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. · If the audio function mode is activated, press FUNC./SETUP to return to preset mode. 8-EN RDS Rotary encoder BAND/TA FUNC./SETUP Recalling Preset RDS Stations 1 2 3 4 Press FUNC./SETUP to activate the function mode. Press 1 AF to activate the RDS mode. Press FUNC./SETUP to activate the preset mode. Make sure that the function mode returns to preset mode, and then press the preset button in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list. / /ENT AUDIO/RTN 1 AF NEWS 2 3 PTY TITLE 5 If the preset station and the stations in the AF list cannot be received: When the PI SEEK setting is on (refer to "PI SEEK Setting" on page 10), the unit searches again for a station in the PI (Programme Identification) list. If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset No. disappears. If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district. Setting RDS Reception Mode and Receiving RDS Stations The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. 1 2 3 4 5 Press FUNC./SETUP to activate the function mode. Press 1 AF to activate the RDS mode. Press station. or to tune in the desired RDS · For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the F1, F2 and F3 bands only. · Operate the unit while the indicator lights up. If no operation is performed for 10 seconds, the indicator goes out. Press 1 AF again to deactivate the RDS mode. Press FUNC./SETUP to activate the preset mode. Receiving RDS Regional (Local) Stations 1 2 3 4 · When the "Setting PTY31 (Emergency Broadcast) reception" (refer to page 10) is set to on, if the unit receives the PTY31 (Emergency Broadcast) signal, the unit will show "ALARM" in the display automatically. · Operate the unit while the indicator lights up. If no operation is performed for 10 seconds, the indicator goes out. The RDS digital data includes the following: PI Programme Identification PS Programme Service Name AF List of Alternative Frequencies TP Traffic Programme TA Traffic Announcement PTY Programme Type EON Enhanced Other Networks Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP mode. Turn the Rotary encoder to select RDS Regional, and then press / /ENT. Turn the Rotary encoder to select ON or OFF. In the OFF mode, the unit automatically keeps receiving the related local RDS station. Press and hold FUNC./SETUP for at least 2 seconds to return to normal mode. · Pressing AUDIO/RTN during the procedure will return to the previous mode. · If no operation is performed for 60 seconds in the SETUP mode, the setting mode is cancelled. 9-EN PI SEEK Setting 1 2 3 4 Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP mode. Turn the Rotary encoder to select PI Seek, and then press / /ENT. Turn the Rotary encoder to select ON or OFF. Press and hold FUNC./SETUP for at least 2 seconds to return to normal mode. · If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the "TA" indicator blinks. · If you do not want to listen to the traffic information being received, lightly press BAND/TA to skip that traffic information message. The TA mode will remain in the ON position to receive the next traffic information message. · If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized. · In the TA mode, the SEEK tuning selects only the TP stations. · Pressing AUDIO/RTN during the procedure will return to the previous mode. · If no operation is performed for 60 seconds in the SETUP mode, the setting mode is cancelled. PTY (Programme Type) Tuning Setting PTY31 (Emergency Broadcast) reception Turn PTY31 (Emergency Broadcast) reception ON/OFF. 1 2 Press FUNC./SETUP to activate the function mode. Press 3 PTY to activate the PTY mode, while the unit is in Radio (FM receiving) mode. The Programme Type of the station being currently received will be displayed for 10 seconds. If there is no receivable PTY broadcast, "NO PTY" will be displayed for 10 seconds. If no RDS station can be received, the display shows "NO PTY". 1 2 3 4 Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP mode. Turn the Rotary encoder to select Alert PTY31, and then press / /ENT. Turn the Rotary encoder to select ON or OFF. If you set to ON, emergency broadcasts are received regardless of source. "ALARM" is displayed during reception. · If no operation is performed for 10 seconds after pressing 3 PTY, the PTY mode will be automatically cancelled. 3 Press or within 10 seconds after activating the PTY mode to choose the desired programme type while the PTY (programme type) is being displayed. Each press scrolls the programme type by one. Press and hold FUNC./SETUP for at least 2 seconds to return to normal mode. When an emergency broadcast is received, the volume level will be automatically changed to the memorized level in the traffic information mode. For details, refer to "Receiving Traffic Information" on page 10. 4 Press 3 PTY within 10 seconds after selecting the programme type to start searching for a station in the selected programme type. The chosen programme type display blinks during searching and lights when a station is found. If no PTY station is found, "NO PTY" will be displayed for 10 seconds. · Pressing AUDIO/RTN during the procedure will return to the previous mode. · If no operation is performed for 60 seconds in the SETUP mode, the setting mode is cancelled. 5 Press FUNC./SETUP to activate the preset mode. · Operate the unit while the indicator lights up. If no operation is performed for 10 seconds, the indicator goes out. Receiving Traffic Information 1 2 Press and hold BAND/TA for at least 2 seconds so that the "TA" indicator lights up. Press or to select your desired traffic information station. When a traffic information station is tuned in, the "TP" indicator lights up. Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRF-INFO". When the traffic information broadcast is over, the unit will automatically set in the standby mode. 10-EN Receiving Traffic Information While Playing CD or Radio Displaying Radio Text Text messages from a radio station can be displayed. 1 2 Press and hold BAND/TA for at least 2 seconds so that the "TA" indicator lights up. Press or to select a traffic information station if necessary. When a traffic information broadcast starts, the unit automatically mutes the CD player/changer or the regular FM broadcast. When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. Press TITLE while receiving FM in the radio mode to select the Radio Text display. The display will change every time the button is pressed. If there is PS (Programme Service Name) PS (Programme Service Name)* PS (Programme Service Name) Radio Text * Press and hold TITLE for at least 2 seconds if PS is displayed in the radio mode, frequency will be displayed for 5 seconds. If there is no PS (Programme Service Name) FREQUENCY Radio Text FREQUENCY When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received for over 1 minute, the "TA" indicator blinks. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. · The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. The "EON" indicator lights up while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. The display shows "WAITING" for a few seconds, then starts scrolling the text message. · If there is no receivable text information or the unit cannot receive text information properly, the display shows "NO TEXT". 3 Press and hold BAND/TA for at least 2 seconds to deactivate the Traffic Information mode. The "TA" indicator goes out. Priority News This function allows you to preset to give priority to the News programme. You will never miss the News programme as the unit automatically gives priority to the News programme whenever it begins broadcasting, and interrupts the programme you are currently listening. This feature is functional when your unit is set to a mode other than the LW and MW modes. 1 2 Press FUNC./SETUP to activate the function mode while the unit is in Radio (FM receiving) mode. Press NEWS 2 to activate the PRIORITY NEWS mode. The "NEWS" indicator appears in the display. To disable the PRIORITY NEWS function, press NEWS 2. · In the PRIORITY NEWS function, unlike in the TA function, the volume does not increase automatically. 3 Press FUNC./SETUP to activate the preset mode, while the unit is in Radio (FM receiving) mode. · Operate the unit while the indicator lights up. If no operation is performed for 10 seconds, the indicator goes out. 11-EN CD/MP3/WMA/AAC Rotary encoder 5 6 To pause playback, press Pressing / / /ENT. /ENT again will resume playback. After pressing (OPEN) to open the front panel, press to eject the disc. / /ENT (OPEN) SOURCE/ AUDIO/RTN /ESC FUNC./ SETUP 4 5 TITLE Playback · Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. · If the CD does not eject, press and hold for at least 2 seconds. · The "DISC IN" indicator lights up when a disc is inserted. · The CD-player can play discs containing audio data, MP3 data, WMA data and AAC data. · "MP3" is displayed during MP3 playback. · "WMA" is displayed during WMA playback. · "AAC" is displayed during AAC playback. · WMA format files that are protected by DRM (Digital Rights Management), AAC format files that have been purchased from iTunes Music Store and files that are copy-protected (copyright protection) cannot be played back on this unit. · The track display for MP3/WMA/AAC data playback is the file numbers recorded on the disc. · The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back. 1 2 MP3/WMA/AAC Play Display Press (OPEN). The front panel will open. The folder number and file number will be displayed as described below. Insert a disc with the label side facing up. The disc will be pulled into the unit automatically. 101 Folder number display 103 File number display Close the front panel manually and the "DISC IN" indicator lights up. When a disc is already inserted, press SOURCE/ to switch to the DISC mode. The mode will change every time the button is pressed. TUNER DISC iPod*1 CHANGER*2 TUNER · Press TITLE to switch the display. See "Displaying the Text" (page 18) for information about display switching. *1 Only when the iPod is connected. *2 Only when the CD changer is connected. 3 4 While playing back MP3/WMA/AAC, press select the desired folder. Pressing and holding continuously. or will change folders or to Press or to select the desired track (file). Returning to the beginning of the current track (file): Press . Fast backward: Press and hold . Advancing to the beginning of the next track (file): Press . Fast forward: Press and hold . 12-EN Repeat Play Press played. Press CD mode : : Only a track is repeatedly played back. : A disc is repeatedly played back. MP3/WMA/AAC mode : 4 to play back repeatedly the track being : Only files in a folder are played back in random sequence. : The files are played back in random sequence. If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc. The track (file) will be played repeatedly. 4 again and select off to deactivate repeat play. · If a CD changer or an MP3 compatible CD changer is connected: After pressing FUNC./SETUP to select the function mode (RPT/ M.I.X.), perform the operation within 10 seconds. *1 When a CD changer is connected. · If RPT is set to ON during M.I.X. play in CD changer mode, M.I.X. will apply to the current disc only. MP3/WMA/AAC mode : : Only a file is repeatedly played back. : Only files in a folder are repeatedly played back. : A disc is repeatedly played back. Searching from CD Text Tracks can be searched and played by using the CD text on the disc. If a disc is not compatible with text, or a disc is in the changer, searches can be made by track number. 1 2 Press /ESC during play. This will set the search mode. Turn the Rotary encoder to select the desired track, and then press / /ENT. This will play the selected track. *2 When an MP3 compatible CD changer is connected. · If a CD changer or an MP3 compatible CD changer is connected: After pressing FUNC./SETUP to select the function mode (RPT/ M.I.X.), perform the operation within 10 seconds. · Press and hold /ESC for at least 2 seconds in the search mode to cancel. Or, the search mode is cancelled if no operation is performed for 10 seconds. · CD text search cannot be made during M.I.X. play. M.I.X. (Random Play) Press 5 in the play or pause mode. The tracks (files) on the disc will be played back in random sequence. To cancel M.I.X. play, press 5 CD mode : again. File/Folder Name Search (concerning MP3/WMA/AAC) Folder and file names may be searched and displayed during playback. 1 2 Press /ESC to activate Search selection mode during MP3/WMA/AAC playback. Turn the Rotary encoder to select Folder Name Search mode or File Name Search mode, and then press / /ENT. : The tracks are played back in random sequence. : The tracks on all the CDs in the current magazine will be played back in the random sequence. Folder Name Search mode 3 4 Turn the Rotary encoder to select the desired folder. Press and hold / /ENT for at least 2 seconds to play back the first file in the selected folder. *3 When a CD changer equipped with the ALL M.I.X. function is connected. · If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD changer mode, M.I.X. will apply to the current disc only. 13-EN · Press and hold /ESC for at least 2 seconds in the search mode to cancel. Or, the search mode is cancelled if no operation is performed for 10 seconds. · To search for files in the Folder Name Search mode, press / /ENT. Files in the folder may be searched. · Press AUDIO/RTN to exit Folder Name Search mode in step 3 in order to select File Name Search mode. · The root folder is displayed as " ". · Folder Name Search cannot be made during M.I.X. play. About MP3/WMA/AAC CAUTION File Name Search mode Except for private use, duplicating audio data (including MP3/ WMA/AAC data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty. What is MP3? MP3, whose official name is "MPEG-1 Audio Layer 3," is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC. MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realises such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds. What is AAC? 3 4 5 Press or to select another Folder. Select the desired file by turning the Rotary encoder. Press / /ENT to play back the selected file. · Press and hold /ESC for at least 2 seconds in the search mode to cancel. Or, the search mode is cancelled if no operation is performed for 10 seconds. · Press AUDIO/RTN in the search mode to return to the previous mode. · File Name Search cannot be made during M.I.X. play. Quick Search You can search for tracks (files). AAC is the abbreviation for "Advanced Audio Coding", and is a basic format of audio compression used by MPEG2 or MPEG4. What is WMA? WMA, or "Windows MediaTM Audio," is compressed audio data. WMA is similar to MP3 audio data and can achieve CD quality sound with small file sizes. Method for creating MP3/WMA/AAC files Audio data is compressed using software with MP3/WMA/AAC codecs. For details on creating MP3/WMA/AAC files, refer to the user's manual for that software. MP3/WMA/AAC files that can be played back by this device have the following file extensions: MP3: "mp3" WMA: "wma" (ver. 7.1, 8 and 9 are supported) AAC: "m4a" There are many different versions of the AAC format. Confirm that the software being used conforms to the acceptable formats listed above. It's possible that the format may be unplayable even though the extension is valid. Playback of AAC files encoded by iTunes version 7.0 or earlier is supported. Supported playback sampling rates and bit rates MP3 Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps WMA Sampling rates: 48 kHz, 44.1 kHz, 32 kHz Bit rates: 48 - 192 kbps AAC Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 16 - 320 kbps This device may not play back correctly depending on sampling rates. 1 2 Press and hold /ESC for at least 2 seconds in the CD/Changer/MP3/WMA/AAC mode to activate Quick Search mode. Turn the Rotary encoder to select a desired track (file). The selected track is played back immediately. · Press and hold /ESC for at least 2 seconds in the search mode to cancel. Or, the search mode is cancelled if no operation is performed for 10 seconds. 14-EN ID3 tags/WMA tags This device supports ID3 tag v1 and v2, and WMA tag. If tag data is in an MP3/WMA/AAC file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data. This device can only display single-byte alphanumeric characters (up to 30 for ID3 tags and up to 15 for WMA tags) and the underscore. For non-supported characters, the display is blank. The tag information may not be correctly displayed, depending on the contents. Producing MP3/WMA/AAC discs MP3/WMA/AAC files are prepared, then written to a CD-R or CD-RW using CD-R writing software. A disc can hold up to 510 files/folders (including Root Folders), and the maximum number of folders is 255. Playback may not be performed if a disc exceeds the limitations described above. Media supported The media that this device can play back are CD-ROMs, CD-Rs, and CD-RWs. Corresponding File Systems This device supports discs formatted with ISO9660 Level 1 or Level 2. Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file name is limited. Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and `_' (underscore). This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly. Formats supported This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing. Order of files Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what is expected. Verify the writing order in the software's documentation. The playback order of the folders and files is as follows. Root folder Folder MP3/WMA/AAC File * The folder No./folder Name will not be displayed if no file is contained in the folder. Terminology Bit rate This is the "sound" compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files. Sampling rate This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data. Encoding Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format. Tag Song information such as track titles, artist names, album names, etc., written into MP3/WMA/AAC files. Root folder The root folder (or root directory) is found at the top of the file system. The root folder contains all folders and files. It is created automatically for all burned discs. 15-EN Sound Setting Rotary encoder Setting the Bass Control You can change the Bass Frequency emphasis to create your own tonal preference. /ESC SOURCE/ BAND/TA 1 Press A.SEL to select the BASS (bass Centre frequency) control mode. BASS TREBLE HPF BASS Setting the Bass Centre Frequency 2-1 Press BAND/TA to select the desired bass centre AUDIO/RTN (LOUD) A.SEL frequency. 80 Hz 100 Hz 200 Hz 60 Hz 80 Hz Emphasizes the displayed bass frequency ranges. Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat Setting the Bass Bandwidth 2-2 Press SOURCE/ bandwidth. to select the desired bass 1 Press AUDIO/RTN repeatedly to choose the desired mode. Each press changes the mode as follows: SUBWOOFER* BASS DEFEAT VOLUME Subwoofer: 0 ~ +15 Bass level: ­7 ~ +7 Treble level: ­7 ~ +7 Balance: L15 ~ R15 Fader: R15 ~ F15 Defeat: ON/OFF Volume: 0 ~ 35 TREBLE BALANCE SUBWOOFER FADER (Narrow) (Wide) Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the centre frequency. A narrower setting will boost only frequencies near the centre frequency. Setting the Bass Level · If no operation is performed for 5 seconds after selecting the SUBWOOFER, BASS, TREBLE, BALANCE, FADER or DEFEAT mode, the unit automatically returns to normal mode. * When the subwoofer mode is set to OFF, its level cannot be adjusted. 2-3* Turn the Rotary encoder to select the desired 1 bass level (­7~+7). You can emphasize or weaken the bass level. 3 2 Turn the Rotary encoder until the desired sound is obtained in each mode. By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults. Press and hold /ESC for at least 2 seconds to return to normal mode. · If the Rotary encoder is not turned for 5 seconds after selecting the SUBWOOFER BASS, TREBLE, BALANCE, FADER or DEFEAT mode, the unit automatically returns to normal mode. · Depending on the connected devices, some functions and display indications do not work. · If no operation is performed for 15 seconds, the unit will return to normal mode automatically. · The bass level settings will be individually memorized for each source (FM, MW (LW), CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, MW (LW), CD etc.). · Depending on the connected devices, some functions and display indications do not work. However, Bass Level is still adjustable if an audio processor with the Bass function is connected. · The function is inoperable when DEFEAT is set to ON. *1 The adjustment can also be made by pressing AUDIO/RTN. Refer to "Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat" (page 16). 16-EN Setting the Treble Control You can change the Treble Frequency emphasis to create your own tonal preference. Turning Loudness On/Off Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound. 1 Press A.SEL to select the TREBLE (treble Centre frequency) control mode. BASS TREBLE HPF BASS Press and hold AUDIO/RTN (LOUD) for at least 2 seconds to activate or deactivate the loudness mode. · When an external audio processor is connected, this setting cannot be made. · The function is inoperable when DEFEAT is set to ON. Setting the Treble Centre Frequency 2-1 Press BAND/TA to select the desired treble Centre frequency. 10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz Emphasizes the displayed Treble frequency ranges. Setting the Treble Level 2-2* Turn the Rotary encoder to select the desired 2 treble level (­7~+7). You can emphasize the treble level. 3 Press and hold /ESC for at least 2 seconds to return to normal mode. · If no operation is performed for 15 seconds, the unit will return to normal mode automatically. · The treble level settings will be individually memorized for each source (FM, MW (LW), CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, MW (LW), CD, etc.). · Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if an audio processor with the Treble function is connected. · The function is inoperable when DEFEAT is set to ON. *2 The adjustment can also be made by pressing AUDIO/RTN. Refer to "Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat" (page 16). Adjusting the High Pass Filter The High Pass Filter on this unit can be adjusted to suit your personal taste. 1 2 3 Press A.SEL to select the HPF (High Pass Filter) mode. BASS TREBLE HPF BASS Turn the Rotary encoder to select the HPF frequency.