User manual ALPINE IVA-D105R

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R Mobile Media Station EN IVA-D105R DE DIGITAL VIDEO FR · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. · ISTRUZIONI PER L 'USO Si prega di leggere prima di utilizzare l'attrezzatura. · ANVÄNDARHANDLEDNING Innan du använder utrustningen bör du läsa igenom denna användarhandledning. ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U.K. LTD. Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K. Phone 0870-33 33 763 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 Designed by ALPINE Japan Printed in China (Y) 68-08564Z60-B ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPAÑA, S.A. Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588 ALPINE ELECTRONICS (BENELUX) GmbH Leuvensesteenweg 510-B6, 1930 Zaventem, Belgium Phone 02-725-13 15 ES IT SE YAMAGATA (Wuxi) Co., Ltd. Block 28-25,Changjiang Nanlu, WND, jiangsu, China ENGLISH Contents Operating Instructions WARNING WARNING ................................................. 4 CAUTION .................................................. 4 PRECAUTIONS ........................................ 5 Discs Playable on This Unit ................... 6 CD/MP3/WMA/AAC Playback ..........................................................16 Repeat Play .....................................................17 M.I.X. (Random Play) ....................................17 Selecting Folders (concerning MP3/WMA/AAC) ...................17 About MP3/WMA/AAC .................................17 DVD/Video CD Playing a Disc ................................................19 To display the DVD mode screen ...............19 If a menu screen appears .............................20 Displaying the Top Menu Screen ...............21 Displaying the Menu Screen ......................21 Displaying the Menu Operation Mode Screen ...........................................21 Searching by Programme ...............................21 Searching by Playlist .....................................21 Stopping Playback (PRE STOP) ....................21 Stopping Playback .........................................21 Fast-forwarding/Fast-reversing ......................22 Finding the Beginnings of Chapters/Tracks/Files .................................22 Playing Still Frames (Pausing) .......................22 Forward/reverse frame-by-frame Playback ....22 Slow Motion Playback ...................................22 Selecting Programme (SKIP) .........................23 Selecting Playlist (SKIP) ...............................23 Selecting Folders ............................................23 Repeat Playback .............................................23 Searching by Title/Group/Program/playlist/ Folder Number ............................................24 Searching Directly by Chapter, Track or File Number .......................................................24 Switching the Angle .......................................25 Scroll to Move the Page Forward or Back .....25 Switching the Audio Tracks ...........................25 Switching the Subtitles (Subtitle Language) ....................................25 Switching from the disc menu ....................25 Displaying the Disc Status for DVD/Video CD ..........................................26 About DivX® ..................................................26 Getting Started Accessory List .................................................. 9 Location of Controls ........................................ 9 Detaching and Attaching the Front Panel ...... 10 Initial System Start-Up ................................... 10 Turning Power On or Off ............................... 10 Opening/Closing the Monitor ........................ 10 Moving the Monitor to be Flat ....................... 11 Adjusting the Volume ..................................... 11 Lowering Volume Quickly ............................. 11 How to view the Display ................................ 11 PULSETOUCH operation .......................... 11 Recalling the Source ................................... 11 Displaying the Numeric Keypad Input Screen ............................................. 12 Radio Listening to the Radio .................................... 13 Manual Storing of Station Presets .................. 13 Automatic Memory of Station Presets ........... 13 Tuning to Preset Stations ................................ 13 RDS Operation Turning AF (Alternative Frequencies) On or Off ..................................................... 14 Receiving Traffic Information ........................ 14 PTY (Programme Type) Tuning ..................... 14 Receiving Traffic Information While Playing CD or Radio ........................ 15 Priority News .................................................. 15 Displaying Radio Text .................................... 15 1-EN Other Useful Features Adjusting the Audio (Adjust the Subwoofer/ Bass/Treble/Balance/Fader/Loudness/ NAV. LEVEL/Highpass Filter/Defeat) ........ 26 Search Function .............................................. 27 Rear Selection Function .................................. 28 Switching Display Modes ............................... 28 Switching the Visual Source Only (Simultaneous Function) ............................. 29 Cancelling the Simultaneous Function ........ 29 Blackout Mode On and Off ............................ 29 Setting rear Camera Interruption .................... 29 Setting the Scroll ......................................... 36 Changing the Russian Font ......................... 36 Adjusting the Dimmer of Button Lighting at Night ......................... 36 SYSTEM Setup System Setup Operation ................................. 37 Setting the External Device Interrupt Mode ......................................... 37 Setting the Interrupt Icon Display ............... 37 Switching the function of the remote sensor ..................................... 37 Setting the Navigation Mode ...................... 37 Setting the Navigation Interruption ............ 38 Setting the AUX Mode ............................... 38 Adjusting the External Input Audio Level .................................... 38 Setting the USB Adapter to ON/OFF ......... 38 Setting the Rear Camera Input .................... 38 Setting the Picture/Sound Output ............... 38 Setting the Bluetooth Connection (Bluetooth IN) ......................................... 38 Setting the VISUAL Button ........................ 39 Changing the Lighting Colour of Buttons .................................... 39 Subwoofer On and Off ................................ 39 Setting the Digital Output ........................... 39 DISPLAY Setup Display Setup Operation ................................ 39 Adjusting the Monitor Angle ...................... 39 Setting Automatic Opening/ Closing of the Monitor ............................ 40 Setting the Brightness of the Backlighting ....................................... 40 Adjusting the Minimum Level of Backlight .................................................. 40 Setting Automatic Background Textures .... 40 Switching Background Textures ................. 40 Switching the Font Background Colour ..... 40 Turning the Touch Panel Vibration ON or OFF ............................................... 40 Adjusting the Touch Panel .......................... 40 VISUAL EQTM Visual EQ Setting Operation .......................... 41 Selecting the VISUAL EQ Mode (Maker's setting) ...................................... 41 Adjusting Brightness ................................... 41 Adjusting Colour of Picture ........................ 41 Adjusting Tint of Picture ............................. 42 Adjusting Image Contrast ........................... 42 Adjusting Picture Quality ........................... 42 Storing VISUAL EQ ................................... 42 Setup DVD Setup DVD Setup Operation ..................................... 30 Changing the language setting .................... 30 Setting of the Menu Language .................... 30 Setting of the Audio Language ................... 30 Setting of the Subtitle Language ................. 31 Changing the Country Code Setting ........... 31 Setting the Rating Level (Parental Lock) .... 31 Changing the Digital Output Setting ........... 31 Setting the Downmix Mode ........................ 33 Setting the TV Screen ................................. 33 Setting of the Bonus Code .......................... 33 Setting the DVD-Audio Playback Mode .... 33 Setting the compressed File Playback Data ................................... 33 Playing MP3/WMA/AAC Data ................... 34 Displaying DivX® Disc Information .......... 34 Setting the Video CD Play Mode ................ 34 RADIO Setup Radio Setup Operation .................................... 34 RDS Time Display ...................................... 34 Adjusting Source Signal Levels .................. 34 PI SEEK Setting .......................................... 34 Receiving RDS Regional (Local) Stations .. 35 Switching the Display Language of PTY (Programme Type) ................................... 35 Setting PTY31 (Emergency Broadcast) Reception ................................................. 35 GENERAL Setup General Setup Operation ................................ 35 Displaying the Time .................................... 35 Setting the Time .......................................... 35 Setting Daylight Saving Time ..................... 36 Demonstration Function .............................. 36 Sound (Beep) Guide Function ..................... 36 2-EN Data Download Downloading the BACKGROUND data ........ 43 Auxiliary Device (Optional) Operating Auxiliary Devices (Optional) .........51 Adjusting Sound DVD 5.1CH Operation DVD 5.1CH Operation ................................... 43 External Audio Processor Operation External Audio Processor (Optional) ............. 44 Adjustment Procedure for Dolby Surround ... 44 Setting the Speakers ...................................... 45 Set MX Mode of the External Audio Processor ......................................... 45 Adjusting the Subwoofer Lowpass Filter ....... 45 X-OVER Adjustment .................................... 45 Performing Time Correction Manually (TCR) ......................................... 46 Phase Switching ............................................ 47 Graphic Equalizer Adjustments .................... 47 Parametric Equalizer Adjustments ................ 47 Setting Bass Sound Control .......................... 48 Setting Bass Compressor ........................... 48 Setting Bass Focus ..................................... 48 Speaker Setup ................................................ 48 Setting of Dolby Digital ................................ 48 Adjusting the acoustic image (BI-PHANTOM) .................................... 49 Mixing bass sound to the rear channel (REAR MIX) .......................................... 49 Achieving powerful high volume sound (LISTENING MODE) ............................ 49 Adjusting the speaker levels (OUTPUT LEVEL) ................................ 49 Setting the Output Channel (OUTPUT MODE) ................................. 49 Adjusting the DVD Level .............................. 50 Storing Settings in the Memory .................... 50 Recalling the Preset Memory ...................... 50 Using the Pro Logic II Mode ........................ 50 Linear PCM Setting ....................................... 50 TUE-T200DVB Operation (Optional) Operating the TUE-T200DVB (Optional) ......52 Changer (Optional) Controlling CD Changer (Optional) ...............52 Multi-Changer Selection (Optional) ...............53 iPod® (Optional) Playback ..........................................................53 Searching for a desired Song ..........................54 Searching by artist name .............................54 Direct Search Function ...................................54 Selecting Playlist/Artist/Album/Genre/ Composer/Podcast .......................................54 Random Play Shuffle (M.I.X.) .....................55 Repeat Play .....................................................55 Information About DVDs ...................................................55 Terminology ....................................................56 List of Language Codes ..................................57 List of Country Codes .....................................58 In Case of Difficulty .......................................60 Specifications ..................................................64 Installation and Connections Warning .................................................. 65 Caution ................................................... 65 Precautions ........................................... 65 Installation ......................................................66 Connections ....................................................68 System Example .............................................70 Navigation System (Optional) Switching the Navigation Screen (Optional) .................................................... 51 Portable Navigation System Operation (Optional) .................................................... 51 3-EN Operating Instructions WARNING WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED. It is dangerous for the driver to watch TV/Video while driving a vehicle. Installing this product incorrectly enables the driver to watch TV/Video while driving. This may cause a distraction, preventing the driver from looking ahead, thus causing an accident. The driver or other people could be severely injured. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product. CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. DO NOT WATCH VIDEO WHILE DRIVING. Watching the video may distract the driver from looking ahead of the vehicle and cause an accident. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident. KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT PANEL OR MOVING MONITOR IS IN MOTION. Failure to do so may result in personal injury or damage to the product. KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING. Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE. MINIMIZE DISPLAY VIEWING WHILE DRIVING. Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident. DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc. KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. 4-EN PRECAUTIONS Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic. New Discs To prevent the CD from jamming, "DISC ERROR" is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again. Centre Hole Centre Hole New Disc Temperature Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C (+32°F) before turning your unit on. Moisture Condensation You may notice the disc playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate. Bumps Outside (Bumps) Damaged Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism. Installation Location Make sure the IVA-D105R will not be installed in a location subjected to: · · · · Direct sun and heat High humidity and water Excessive dust Excessive vibrations Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing. Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc. CORRECT INCORRECT CORRECT Inserting Discs Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. "DISC ERROR" will be displayed on your player if you insert a disc incorrectly. If "DISC ERROR" continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player. Disc Cleaning Fingerprints, dust, or soil on the surface of the disc could cause the DVD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc. Irregular Shaped Discs Be sure to use round shaped discs only for this unit and never use any special shaped discs. Use of special shaped discs may cause damage to the mechanism. 5-EN Disc Accessories There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine DVD players. Discs Playable on This Unit Playable discs The discs listed below can be played on this unit. Mark (logo) Recorded content Audio + Video Audio + Video Disc size 12 cm* 8 cm 12 cm* 8 cm DVD Video Transparent Sheet Disc Stabilizer DVD Audio Handling the Detachable Front Panel · Do not expose to rain or water. · Do not drop or subject to shock. · After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal. · In cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal. Alpine products equipped with the Ai-NET bus, connected to the IVA-D105R, can be operated from the IVA-D105R. Depending on the products connected, the functions and displays will vary. For details, consult your Alpine dealer. Operation of some of the functions of this unit is very complex. Because of this, it was deemed necessary to place these functions into a special screen. This will restrict operation of these functions to times when the vehicle is parked. This ensures the focus of the driver's attention will be on the road and not on the IVA-D105R. This has been done for the safety of the driver and passengers. Audio Processor Adjustments cannot be made if the car is moving. The car must be parked and the parking brake must be engaged for the procedure described in the Owner's Manual to be valid. The warning "CAN'T OPERATE WHILE DRIVING," will be displayed if any attempts are made to perform these operations while driving. · The IVA-D105R draws minimal current even when its power switch is turned off. If the switched power (ignition) lead of the IVA-D105R is connected directly to the positive (+) post of the vehicle's battery, the battery may be discharged. An SPST (Single-Pole, Single-Throw) switch (sold separately) can be added to simplify this procedure. Then, you can simply place it in the OFF position when you leave the vehicle. Turn the SPST switch back ON before using the IVA-D105R. For connecting the SPST switch, refer to the "Connection Diagram of SPST Switch (Sold Separately)" (page 67). If the power (ignition) lead is unswitched, it must be disconnected from the battery post should the vehicle be left unused for an extended period of time. Video CD 12 cm Audio + Video 8 cm 12 cm Music CD Audio 8 cm (CD single) * Two-layer DVD disc compatible 6-EN Discs that cannot be played DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA/ AAC files), photo CDs, etc. Tips for making your own CDs The IVA-D105R plays DVD Video, DVD Audio, Video CD, Audio CD, DivX® and has a built in MP3/WMA/AAC decoder. The following information is designed to help you create your own music CDs (either Audio CD or MP3/WMA/AAC encoded CD-R/ RW files). What is the difference between an Audio and MP3/WMA/AAC CD? An Audio CD is the same format as the commercial CDs you buy in the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer 3)/WMA (Windows Media Audio)/AAC (Advanced Audio Coding) is a data file that uses a compression scheme to reduce the size of the music file.* Hybrid Audio CD and Data (MP3/WMA/AAC) CD-R/RW discs: The IVA-D105R can read either sector on the disc. Choose CD-DA to play the CD audio section or MP3/WMA/AAC to play the MP3/ WMA/AAC section.* Multisession CD-R/RW: Once a recording has been stopped, this is considered one session. If the disc is not closed (finalized), additional data may be added. Once this additional data has been recorded, this becomes a "multisession" CD. The IVA-D105R can only read multisession DATA Formatted discs (MP3/WMA/AAC files - Not Audio CD files). Properly formatted MP3/WMA/AAC Discs: Use ISO9660 formatting to insure proper playback. You may use standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32 characters) or Joliet (Windows or Macintosh long filenames) file naming conventions*. *Please consult the Owner's manual for additional information. DualDisc This unit is not compatible with DualDisc. Using a DualDisc may cause unit malfunction, and may cause disc damage when the disc is inserted/ejected. DVD region number (playable region number) This DVD player will play back any disc whose region number is 2 (or All). DVDs with a region number other than those listed below, cannot be played on this DVD player. 2 Video CDs ALL This DVD head unit is compatible with playback control (PBC) compatible Video CDs (version 2.0). "PBC" is a function by which you can use menu screens recorded on the disc to find the scene you want to watch and view various types of information in dialogue style. Using compact discs (CD/CD-R/CD-RW) If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC formatted audio files. · Some of the following discs may not play on this unit: Flawed discs, discs with fingerprints, discs exposed to extreme temperatures or sunlight (e.g., left in the car or this unit), discs recorded under unstable conditions, discs on which a recording failed or a re-recording was attempted, copy-protected CDs which do not conform to the audio CD industry standard. · Use discs with MP3/WMA/AAC files written in a format compliant with this unit. For details, see pages 17 and 18. To customers using CD-R/CD-RW · If a CD-R/CD-RW cannot be played back, make sure the last recording session was closed (finalized). · Finalize the CD-R/CD-RW if necessary, and attempt playback again. On handling compact discs (CD/CD-R/CD-RW) · · · · · · Do not touch the surface. Do not expose the disc to direct sunlight. Do not affix stickers or labels. Clean the disc when it is dusty. Make sure that the disc is smooth and flat. Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the disc and you may not be able to play it again. 7-EN Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs · This unit is compatible discs recorded in the DVD-Video and DVD-VR, DivX® mode. · Note that discs not finalized (processed to enable to play on playback-only DVD players) cannot be played on this DVD player. · Some discs may not play back, depending on the recording device and disc format. · Discs or files utilizing copy protection, may not be playable. Some recording systems may not properly format copied files to enable proper playback. · In the following cases, the disc may not play on this unit: discs recorded by certain DVD recorders, certain irregular discs, flawed discs, dirty discs, when the pickup lens of this DVD player is dirty, or when moisture condensation has occurred inside the unit. · Be sure to follow all cautions included with your DVD-Rs/DVDRWs/DVD+Rs/DVD+RWs discs. · Do not put stickers, seals, or tape on the label side of DVD-Rs/ DVD-RWs/DVD+Rs/DVD+RWs. · Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/ DVD+RWs are more affected by heat, moisture, and direct sunlight. If left in a car, etc., damage may occur and it might not play on this unit. · The operable temperature range for disc playback is as follows: DVD-R/DVD-RW: -25 ~ +70°C DVD+R/DVD+RW: +5 ~ +55°C Disc terminology Title If titles are programmed for the DVD, these are the largest units of division of the information recorded on the disc. Chapter Each Title may also be divided into smaller divisions, called chapters. These can be specific scenes or musical selections. · This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. · Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. · "DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc. · Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. · Apple, the Apple logo and iPod, and iTunes are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. · "MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson" · "Supply of this product only conveys a license for private,noncommercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com" 8-EN Getting Started Accessory List · · · · · · · · · · · · Head unit .............................................................................1 Power Cable ........................................................................1 Pre OUT/AUX cable.............................................................1 Mounting Sleeve ..................................................................1 Mounting Bracket ................................................................2 Flush Head screw (M4 x 3)..................................................8 Hexagon washer-head screw (M4 x 6)................................4 Rubber Cap .........................................................................1 Hex Bolt ...............................................................................1 Front Frame .........................................................................1 Carrying bag .......................................................................1 Owner's Manual .............................................................1 set Remote Sensor Point the optional remote control transmitter towards the remote sensor within a range of 2 meters. VISUAL button Press and hold for at least 2 seconds to recall the VISUAL selection screen. If VISUAL is set in "Setting the VISUAL Button" (page 39), momentarily press to recall the VISUAL selection screen, and if NAV. is set, momentarily press to recall the navigation screen. OPEN/CLOSE/FLAT button Opens the monitor. Closes the monitor by pressing and holding for at least 2 seconds. Press to set the open monitor to the flat position. button Ejects a disc. button Use this button to remove the front panel. DISC IN Indicator Lights up when a disc is inserted in the unit. Power Indicator This indicator is lit when power is on. About the expression of buttons in this Owner's Manual · The buttons on this unit are expressed in bold (e.g. SOURCE/ ). The touch buttons on the display are expressed in bold with [ ] (e.g. [BAND]). Connectable to Remote Control Interface Box You can operate this unit from the vehicle's control unit when an Alpine Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer. Location of Controls Rotary encoder/TA/AUDIO Adjust the volume by turning to the left or right. Press the T. INFO mode to turn on or off. If pressed and held for at least 2 seconds, the audio setup screen is displayed. SOURCE/ button Turns the power on. Press and hold for at least 2 seconds to turn the power off. Monitor open: Recalls the SOURCE selection screen. Monitor closed: Changes the source. BAND/RDS button Radio mode: Changes the band. Visual source (except navigation screen): Changes the display mode. Press this button for at least 2 seconds to recall the RDS selection screen. 9-EN Detaching and Attaching the Front Panel Detaching Turning Power On or Off Some of this unit's functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations. 1 2 3 Turn off the unit power. Press (Release) at the lower right side until the front panel pops out. Grasp the right side of the front panel and pull it out. 1 2 Press SOURCE/ to turn on the unit. · The unit can be turned on by pressing any button on the unit except OPEN/CLOSE, FLAT and (Eject). Press and hold SOURCE/ turn off the unit. for at least 2 seconds to · Some operation of the unit cannot be performed while the vehicle is in motion. In this case, be sure to first stop your vehicle and apply the parking brake, then perform the operation. · The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. · To protect the front panel, place it in the supplied carrying bag. Opening/Closing the Monitor Attaching 1 2 Press OPEN. The unit beeps 3 times and opens the monitor automatically. 1 2 Insert the left side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. Push the right side of the front panel until it locks firmly into the main unit. Press and hold OPEN (CLOSE) for at least 2 seconds. The unit beeps 3 times and closes the monitor automatically. · Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. · Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. Initial System Start-Up Immediately after installing or applying power to the unit, it should be initialized. To do this, first, remove the detachable front panel. Behind the front panel, to the left of the connector, there is a small hole. Using a pencil or other pointed object, press the RESET switch mounted behind this hole to complete the initialization procedure. · Opening/closing the monitor should never be performed manually. It may cause a malfunction. · The monitor's angle is set to 90 degrees at the factory. Depending on the car, the monitor may hit the dashboard when opened. The monitor's angle can be adjusted and stored in memory so that the monitor will not hit the dashboard when opening. For adjusting the monitor, refer to "Adjusting the Monitor Angle" (page 39). Even when the vehicle's battery power is removed, the adjusted monitor angle remains stored in memory. · The IVA-D105R is a precision device. With gentle handling, its unique capabilities can be enjoyed for a long time. · If the monitor touches anything while it is being opened (or closed), the monitor will stop opening (or closing) immediately. Should this occur, remove the obstacle and press and hold OPEN for at least 2 seconds again to lower the monitor. · When the movable monitor is opened, do not place any object on the monitor and be careful not to bump or apply any pressure to the monitor while it is open. This can cause damage to the mechanism. · In low ambient temperature conditions, the display may be dark for a short period of time immediately after the power is turned on. Once the LCD has warmed up, the display returns to normal. · For your safety, some operation of the unit cannot be performed while the vehicle is in motion. In this case, first stop the vehicle and engage the parking brake, then perform the operation. · Any of the buttons does not function while the monitor is closing by reset. 10-EN Moving the Monitor to be Flat When you want to operate some function on the car (air conditioner, etc.) which is hidden by the raised monitor, use this function. Recalling the Source Here is an example explanation for the Radio mode display on how to recall a source. 1 2 When the monitor is open, press OPEN (FLAT). The monitor moves to the flat position. 1 Press SOURCE/ . The SOURCE selection screen is displayed. Display example for SOURCE selection screen Press OPEN (FLAT) again. The monitor returns to the previous angle. · The monitor returns to the previous angle 10 seconds after being moved to the flat position. · If an excessive force is added to the monitor when the monitor is flat, putting an object on the back of the monitor for example, it may cause a malfunction. Adjusting the Volume Adjust the volume by turning the Rotary encoder. Volume: 0 - 35 Displays source modes that can be selected. Changes to the Rear Selection screen when "Setting the Picture/Sound Output" (page 38) is set to ON. Returns to the previous screen. · The kind of source modes that are displayed varies depending on connection and setting Lowering Volume Quickly Activating this function will instantly lower the volume level by 20 dB. Touch and hold the [SETUP] for at least 2 seconds on the main source screen. The audio level decreases by about 20 dB. Touch and hold the [SETUP] for at least 2 seconds on the main source screen again brings the audio back to its previous level. How to view the Display PULSETOUCH operation The display unit is equipped with onscreen, tactile feedback buttons (PULSETOUCH). What is the tactile feedback (PULSETOUCH) ? When you touch a button graphic in the display, you will feel a mild vibration and click on the display panel surface. This feedback enables you to easily identify action areas in the display. · To protect the display, touch the onscreen button with the tip of your finger. · If you touch a button and there is no reaction, remove your finger from the display once, and try again. · If you touch two buttons at the same time, a malfunction may occur. Onscreen buttons are expressed as follows in this Owner's Manual. · Onscreen buttons are shown in bold, enclosed in [ ] (e.g. [BAND]). 11-EN 2 Touch [RADIO]. The screen changes to the Radio mode main display. Main screen example for MW Radio mode Displaying the Numeric Keypad Input Screen The numeric keypad input screen is displayed when the DVD or Video CD mode is selected for searching a title or chapter, and also for entering a country code or password for the DVD setup item. 1 2 Touch [10KEY] on the main source screen. Touch the desired numeric key. Display example for numeric keypad Displays the source name, such as radio band, etc., that is selected Working state indicator Displays volume level Function Guide: The function guide display varies depending on each source. Touching [PAGE1/2]* or [PAGE1/3]* on the function guide will change the contents of the function guide, allowing for many other operations to be performed. Displays time Change to SETUP selection screen. * Display may vary depending on the connected devices. · When an optional DVD player or DVD changer compatible with AiNET is connected, AUX appears as "DVD" or "DVD CHG." on the display. · When both the optional DVD player and DVD changer compatible with Ai-NET are connected, AUX appears as "DVD" and DVD changer as "DVD CHG." in the display. Input screen area Closes numeric keypad input screen All input numbers will be deleted Previous number will be deleted Input number is confirmed Numeric keypad The numeric keypad input screen closes if the area is touched while displayed. 3 Touch [ENT] to confirm your entry. 3 Press SOURCE/ on the unit to change the screen to another source. · Pressing VISUAL on the unit will change to the VISUAL selection screen. Set to VISUAL in "Setting the VISUAL Button" (page 39). 12-EN Radio Display example for MW Radio main screen Manual Storing of Station Presets 1 2 3 4 Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning. Touch [PAGE1/2] to change the function guide. Touch and hold any one of the preset buttons [P-1] through [P-6] for at least 2 seconds. The selected station is stored. Repeat the procedure to store up to 5 other stations onto the same band. To use this procedure for other bands, simply select the band desired and repeat the procedure. A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW). Displays the preset number/frequency. Listening to the Radio 1 2 3 4 Press SOURCE/ . · If a preset memory has already been set in the same preset number, it will be cleared and the new station will be memorized. The SOURCE selection screen is displayed. Touch [RADIO]. The radio mode is activated and the display changes to the Radio Mode screen. Automatic Memory of Station Presets The tuner can automatically seek and store 6 strong stations in the selected band in order of signal strength. Touch [BAND] to select the desired radio band. Each press changes the bands as follows: FM-1 FM-2 FM-3 MW LW FM-1 After selecting the desired band, touch [A.MEMO]. The tuner automatically seeks and stores 6 strong stations into [P-1] to [P-6] in order of signal strength. When the automatic storing has been completed, the tuner goes to the station stored in [P-1]. · If no stations are stored, the tuner will return to the original station you were listening to before the automatic storing procedure began. Touch [TUNE] to choose the tuning mode. Each touch changes the tuning mode display. Distance Local Manual Distance · There are two modes you can select for auto tuning, DX and Local: - DX (Distance) mode (with DX SEEK indicator ON); Both strong and weak stations will be tuned in. - Local mode (with SEEK indicator ON); Only strong stations will be tuned in. The initial setting is DX. Tuning to Preset Stations You can tune in the preset stations in memory on each band using the preset number. 1 2 5 Touch [ ], [ ] or [ ], [ ] to change the radio frequency up or down respectively. When touched and held in the manual mode, the frequency changes continuously. After selecting the desired band, touch [PAGE1/2] to change the function guide. Touch any one of the preset buttons [P-1] through [P-6] that has a station stored to it. The preset station is received. 13-EN RDS Operation Turning AF (Alternative Frequencies) On or Off The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. Receiving Traffic Information Press TA (Rotary encoder) to turn on the Traffic Information mode. When the traffic information station is tuned in, the TA indicator lights up. Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "T. INFO". When traffic information broadcast is over, the unit will automatically set in the standby mode. · If the traffic information broadcast signal falls below a certain level, the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 70 seconds, "TA" blinks in the display. · If you do not want to listen to the traffic information being received, lightly press TA (Rotary encoder) to skip that traffic information message. The T. INFO mode will remain in the ON position to receive the next traffic information message. · If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized. 1 2 3 4 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. Touch [ ] of SOURCE. The SOURCE SETUP screen appears. Touch [ ] of RDS. The display changes to the RDS mode screen. Touch [AF] to select the AF (Alternative Frequency) ON or OFF mode. · When the AF ON mode is selected, the unit automatically tunes to a strong signal station in the AF list. · Use the AF OFF mode when automatic re-tuning is not required. 5 Tips Touch [RETURN] to return to the previous screen. PTY (Programme Type) Tuning · If the unit receives the PTY31 (Emergency Broadcast) signal, the unit will show "ALARM" in the display only when PTY31 is set to on. For operation, refer to "Setting PTY31 (Emergency Broadcast) Reception" (page 35). · The RDS digital data includes the following: PI Programme Identification PS Programme Service Name AF List of Alternative Frequencies TP Traffic Programme TA Traffic Announcement PTY Programme Type EON Enhanced Other Networks · Refer to pages 34 and 35 about "PI SEEK Setting", "Receiving RDS Regional (Local) Stations", "Switching the Display Language of PTY (Programme Type)" and "Setting PTY31 (Emergency Broadcast) Reception". 1 2 3 4 Press and hold BAND/RDS for at least 2 seconds in the FM radio mode. The display changes to the RDS Setting Screen. Touch [PTY] to activate the PTY mode. The Programme Type of the station being currently received will be displayed. Touch [ ] or [ ] after activating the PTY mode to choose the desired programme type while "PTY" (programme type) is displayed. Each press scrolls the programme type by one. Touch [PTY] after selecting the programme type to start searching for a station of the selected programme type. If no station is found, "NO PTY" will be displayed. 14-EN Receiving Traffic Information While Playing CD or Radio The example explained here is how to receive the traffic information broadcast during CD playback. Displaying Radio Text Text messages from a radio station can be displayed. 1 In the CD mode, press TA (Rotary encoder) to turn on the Traffic information mode. The unit automatically starts to search the receivable traffic broadcasts. When the traffic information broadcast is searched out, the CD mode is switched to the Radio mode and the unit receives the traffic information broadcast. · When the traffic information broadcast starts, the unit automatically mutes the CD. · When the traffic information broadcast finishes, the unit automatically returns to the original source you were playing before the traffic information broadcast began. 1 2 3 Tune in a radio station that transmits text messages. Touch [INFO.] in the FM radio mode to activate the Radio Text mode. The display shows "WAIT" for a few seconds. To deactivate the Radio Text mode, touch [INFO.]. · If there is no receivable text message or the unit cannot receive a text message properly, the display shows "NO TEXT". · The receiver is equipped with the EON (Enhanced Other Networks) function so if the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information. 2 When the traffic information broadcast has finished, the unit returns to the CD mode. Priority News This function allows you to preset to give priority to the News programme. You will never miss the News programme as the unit automatically gives priority to the News programme whenever it begins broadcasting, and interrupts the programme you are currently listening. This feature is functional when your unit is set to a mode other than the LW and MW modes. 1 2 3 4 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. Touch [ ] of SOURCE. The SOURCE SETUP screen appears. Touch [ ] of RDS. The display changes to the RDS mode Screen. Touch [NEWS] to activate the PRIORITY NEWS mode. The "NEWS" indicator appears in the display. Touch [NEWS] again to deactivate the Priority News mode and return to the programme you were previously listening. · In the PRIORITY NEWS function, unlike in the T.INFO function, the volume does not increase during operation. 5 Touch [RETURN] to return to the previous screen. 15-EN CD/MP3/WMA/AAC Display example for MP3/WMA main screen Playback 1 2 Press SOURCE/ . The SOURCE selection screen is displayed. Touch [DVD]. The display shows the DVD player mode screen. When a CD/MP3/WMA/AAC is inserted into the DISC SLOT of the IVA-D105R, with the label side facing up, the unit starts to play the CD/MP3/WMA/AAC. 3 CD: Displays track text*1 in the upper line. Displays Disc Text/Artist *1 in the lower line. · If there is neither Track nor Disc name information, "NO TEXT" will be displayed. Touch [ (file). ] or [ ] to select the desired track Returning to the beginning of the current track (file) : Touch [ ]. Fast reverse : Touch and hold [ ]. MP3/WMA/AAC: After displaying the file name in the upper line, the track name is displayed if there is ID3 tag information. After displaying the folder name in the lower line, the album name/artist name are displayed if there is ID3 tag information. Advancing to the beginning of the next track (file) : Touch [ ]. Fast forward : Touch and hold [ ]. To pause playback Touch [ / Touching [ ]. / ] again will resume playback. CD: Displays the disc number*2/track number/elapsed time. MP3/WMA/AAC: Displays the disc number*3/folder number/file number/ elapsed playback time To eject the disc Press . [ ] button: Refer to page 27 · If the disc does not eject, press and hold for at least 3 seconds. · The IVA-D105R models include a built-in MP3/WMA/AAC unit. You can play CD-ROMs, CD-Rs, and CD-RWs containing MP3/WMA/ AAC files on this unit. Use the format compliant with this unit. For further information about playing or storing MP3/WMA/AAC files, refer to pages 17 and 18 before using the unit. · WMA format files that are protected by DRM (Digital Rights Management), AAC format files that have been purchased from iTunes Music Store and files that are copy-protected (copyright protection) cannot be played back on this unit. · The unit can play discs containing both audio data and MP3/WMA/ AAC data. · The MP3/WMA or AAC indicator is lit during MP3/WMA or AAC playback. · The track display for CD audio data playback is the track numbers recorded on the disc. · Three-inch (8cm) CD's can be used. · "Playing MP3/WMA/AAC Data" is mentioned on page 34. · When an MP3/WMA/AAC disc is played, it sometimes takes a few moment until it starts. · Touch [ ] to activate the search mode. For operations, refer to "Search Function" on page 27. However, the search mode function does not work in the CD changer mode. · The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back. · If the disc is left in the unit after pressing , the disc is automatically pulled back into the unit and paused. In this case, start playback by touching [ / ] or eject again and remove the disc within 15 seconds. *1 Displayed when a CD text disc is inserted. *2 Displayed when a CD changer is connected. *3 Displayed when an MP3 compatible CD changer is connected. 16-EN Repeat Play Touch [ ] to play back repeatedly the track currently being played. The track (file) will be played repeatedly. Touch [ CD: RPT ] again and select OFF to deactivate Repeat play. RPT DISC*1 (off) RPT About MP3/WMA/AAC CAUTION Except for private use, duplicating audio data (including MP3/ WMA/AAC data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty. What is MP3? MP3, whose official name is "MPEG-1 Audio Layer 3," is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC. MP3/WMA/AAC: 1 Touch [PAGE1/2]*3 to change the function guide. 2 Touch [ ] and select the desired Repeat play. RPT RPT FLDR*2 RPT DISC*1 (off) RPT *1 If a CD Changer or an MP3 compatible CD changer is connected and the RPT DISC mode is selected, the unit repeatedly plays back all tracks (files) on the disc selected. 2 Only files in a folder are repeatedly played back. * *3 Display may vary depending on the connected devices. M.I.X. (Random Play) Touch [ ] during playback. The tracks (files) on the disc will be played back in a random sequence. To cancel M.I.X. play, touch [ CD: M.I.X. M.I.X. ALL*1 ]. (off) M.I.X. MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds. What is WMA? WMA, or "Windows mediaTM Audio," is compressed audio data. WMA is similar to MP3 audio data and can achieve CD quality sound with small file sizes. What is AAC? AAC is the abbreviation for "Advanced Audio Coding," and is a basic format of audio compression used by MPEG2 or MPEG4. Method for creating MP3/WMA/AAC files Audio data is compressed using software with MP3/WMA/AAC codecs. For details on creating MP3/WMA/AAC files, refer to the user's manual for that software. MP3/WMA/AAC files that can be played back by this device have the following file extensions: MP3: "mp3" WMA: "wma" (ver. 2, 7, 8, 9 are supported, however PRO, VOICE, LOUDNESS are not supported) AAC: "m4a" There are many different versions of the AAC format. Confirm that the software being used conforms to the acceptable formats listed above. It's possible that the format may be unplayable even though the extension is valid. Playback of AAC files encoded by iTunes version 4.8 or earlier is supported. MP3/WMA/AAC: 1 Touch [PAGE1/2]*4 to change the function guide. 2 Touch [ ] and select the desired M.I.X. play. M.I.X. FLDR*3 M.I.X.*2 (off) M.I.X. FLDR*3 *1 If a CD Changer equipped with the M.I.X. ALL function is connected, M.I.X. ALL will also be selectable. In this mode, the tracks on all the CDs in the current magazine will be included in the random playback sequence. *2 If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc. *3 Only files in a folder are played back in random sequence in the M.I.X. FLDR mode. *4 Display may vary depending on the connected devices. Selecting Folders (concerning MP3/ WMA/AAC) Touch [ FLDR] or [FLDR ] to select the folder. 17-EN Supported playback sampling rates and bit rates MP3 Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps WMA Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz, 16 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps AAC Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 11.025 kHz Bit rates: 16 - 320kbps This device may not play back correctly depending on sampling rates. With low level sampling or bit rates set, playback may not function correctly or sound quality may deteriorate. It is recommended to create a disc using as high a level sampling or bit rate as possible, within the range that playback is possible. ID3 tags/WMA tags This device supports ID3 tag v1 and v2, and WMA tag. If tag data is in an MP3/WMA/AAC file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data (maximum 128 characters). This device can only display single-byte alphanumeric characters and the underscore. For non-supported characters, "NO SUPPORT" is displayed. The number of characters may be limited, or not correctly displayed, depending on the tag information. Producing MP3/WMA/AAC discs MP3/WMA/ACC files are prepared, then written to a CD-R or CDRW (DVD-R/DVD-RW) using CD-R writing software. A disc can hold up to 4096 files/256 folders (including Root Folders). Depending on the folder/file structure of the disc, it can take several minutes to read a disc. In this case, it is recommended to reduce the number of folders used. Media supported The media that this device can play back are CD-ROMs, CD-Rs, CD-RWs, DVD-Rs and DVD-RWs. Corresponding File Systems This device supports discs formatted with ISO9660 Level 1 or Level 2. Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file name is limited. Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and `_' (underscore). This device also can play back discs in Joliet, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly. Formats supported This device supports CD-ROM, CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing. Order of files Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what's expected. Verify the writing order in the software's documentation. The playback order of the folders and files is as follows. Root Folder Folder MP3/WMA/AAC File Terminology Bit rate This is the "sound" compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files. Sampling rate This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data. Encoding Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format. Tag Song information such as track titles, artist names, album names, etc., written into MP3/WMA/AAC files. Root folder The root folder (or root directory) is found at the top of the file system. The root folder contains all folders and files. It is created automatically for all burned discs. 18-EN DVD/Video CD Display example for DVD Video main screen Playing a Disc IVA-D105R has a built-in DVD player. When an optional Alpine DVD/ Video CD/CD player (or DVD changer) is connected to the IVAD105R, you can control it from the IVA-D105R. (except some operations) WARNING It is dangerous for the driver to watch the TV/DVD/ Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. Displays the disc (DVD VIDEO, DVD AUDIO, PROGRAM/PLAYLIST (DVD-VR), VIDEO CD) being played back. Displays tag information for DivX®. Install the IVA-D105R correctly so that the driver cannot watch TV/DVD/Video unless the vehicle is stopped and the emergency brake is applied. If the IVA-D105R is not installed correctly, the driver will be able to watch the TV/DVD/Video while driving the vehicle and may be distracted from looking ahead causing an accident. The driver or other people could be severely injured. Displays the title number/chapter number/elapsed playback time for a DVD Video. Displays the group number/track number/elapsed playback time for a DVD Audio. Displays the program or playlist number/chapter number/ elapsed playback time for a DVD-VR. Displays the track number/elapsed playback time for a Video CD (When PBC is turned off). Displays the folder number/file number/elapsed playback time for a DivX®. · If [ ] on the DivX® mode screen is touched, the search list screen is displayed. Refer to "Search Function" (page 27). · Some operations cannot be carried out depending on the disc or playback screen. · Displays of the function guide [PAGE1/2], etc., may vary depending on the connected device(s). To display the DVD mode screen · If you try to activate the auxiliary device while driving, the display will show the warning-PICTURE OFF FOR YOUR SAFETY. Disc types that can be used for each heading are represented by the following marks. DVD Commercial Video discs (used for the distribution of movies, etc.) or a DVD-R/DVDRW, DVD+R/DVD+RW recorded in a video mode can be used. (including discs containing both DVD video and DVD audio data that are played back when "VIDEO" is set in "Setting the DVDAudio Playback Mode" (page 33)). DVD Commercial Audio discs can be used. DVD-R/DVD-RW discs recorded in DVD-VR mode can be used. Video-CD discs can be used. CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/ DVD+RW discs that are recorded in the DivX® mode can be used. Caution · Not all functions will operate for every DVD. See the individual DVD's instructions for details on the features supported. · Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary. · If you switch the power or Ignition Key OFF or change sources during playback, playback will continue where you left off when you resume playback. · If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen: · Play Position Memory Function Even if you turn power off or switch the Ignition Key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again. 19-EN