R R Voice Navigation System ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF CANADA, INC. Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada Tel.: 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Tel.: (03) 9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7-11 40878 Ratingen, Germany Tel.: 02102-45 50 ALPINE ITALIA S.p.A. Via C. Colombo 8, 20090 Trezzano Sul Naviglio MI, Italy Tel.: 02-48 47 81 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 338 101 280) 98, Rue De La Belle Etoile, Z.I. Paris Nord Il B.P. 50016 F-95945, Roissy, Charles De Gaulle Cedex, France Tel.: 01-48 63 89 89 ALPINE ELECTRONICS OF U.K., LTD. 13 Tanners Drive, Blakelands, Milton Keynes MK14 5BU, U.K. Tel.: 01908-61 15 56 ALPINE ELECTRONICS DE ESPAÑA, S.A. Portal De Gamarra 36, Pabellón 32 01013 Vitoria (Alava)-Apdo. 133, Spain Tel.: 34-45-283588 Designed by ALPINE Japan Printed in Japan (Y) 68P41262Y25-O NVE-N077PS Guide for Installation and Connections Guide d'installation et de connexion Guía de instalación y conexiones Installations- und Anschlußanleitung Guida all'installazione e al collegamento Handleiding voor installatie en aansluiting Installations- och anslutningshandledning Vejledning til installation og tilslutning af forbindelser English Français Español Deutsch Italiano Nederlands Svenska Dansk Yamagata Printing Co., Ltd. 2-6-34, Takashima, Nishi-ku, Yokohama, Kanagawa, Japan PRECAUTIONS I GUIDE FOR INSTALLATION AND CONNECTIONS FOR AUTHORIZED ALPINE DEALERS · Please read this GUIDE FOR INSTALLATION AND CONNECTIONS FOR AUTHORIZED ALPINE DEALERS and the OWNER'S MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope that your new NVE-N077PS will give you many years of enjoyment. In case of problems when installing your unit, please contact your authorized ALPINE dealer. BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts. DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous. DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock. DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER. Doing so may obstruct forward vision or hamper movement etc. and results in serious accident. DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire. DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc. DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR BAG. If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may cause the monitor to spring upwards causing an accident and injuries. MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage. Points to Observe for Safe Usage · For safe operation of this system, please read this manual carefully. We cannot be responsible for problems resulting from failure to observe the instructions in this manual. · Pictorial displays are used to point out safety tips to prevent harm to yourself or others and property damage. Here is what these pictorial displays mean. Knowing them is important to understand this manual. · Meaning of displays This symbol means important Warning instructions. Failure to heed them can result in serious injury or death. This symbol means important instructions. Failure to heed them Caution can result in injury or material property damage. Warning DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc. 2 Caution ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire's insulation from being cut by the metal edge of the hole. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done. USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure. DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure. Precautions IMPORTANT Please record the serial number of your unit in the space provided on the back cover of Owner's Manual and keep it as a permanent record. The serial number plate is located on the bottom of the unit. · For installation of the main unit, avoid areas with a high incidence of dust or moisture. Installing the unit in such locations may result in contamination of the DVD ROM making it unreadable. · Do not install the navigation system near a CD player that may interfere with GPS signal reception. · The optimum locations for installing the GPS aerial are: ­ on the dashboard where no metal piece (such as the defogger wire or aerial wire) is located on the windshield. ­ where no metal cover is located. · Route the Speed Pulse Sensor cable away from the audio cables in order to avoid picking up noises. 3 Contents PRECAUTIONS 1. Preparation 2. Connections 3-1. NVE-N077PS Wiring Diagram With CVA-1003R/TME-M750 3-2. NVE-N077PS Wiring Diagram With IVX-C806/IVA-C800R/ IVX-M706/IVA-M700R/CVA-1006R/CVA-1005R 3-3. NVE-N077PS Wiring Diagram With CVA-1000R 3-4. NVE-N077PS Wiring Diagram With TME-M006SP/TME-M005P 3. Mounting 4. Confirmation 2 5 6 7 8 9 10 11 12 4 1. Preparation 1 Check accessory parts. GPS aerial (5 m) Aerial mounting plate ×3 Cable clamp Parking brake aux. cord ×2 Solderless connector Remote control ×2 Remote control holder (2.5 m) (4.5 m) Power cables 1 Bracket 13P RGB extension cable (6 m) Extension cables 2 Floor base ×2 8 Wing nut (M6) ×4 3 Screw with double washer (M5 × 8) ×4 Battery (AAA) 5 Flanged self-tapping screw (M5 × 15) ×4 4 Hex bolt (M6 × 50) ×4 One each for left and right 6 Spring washer (M6) ×4 7 Flanged hex nut (M6) ×4 9 Velcro fastener ×2 ! Velcro tape " Self-tapping screw (M3 × 12) ×4 2 Prepare tools and mounting information. Screwdriver Electrical tape Mounting the aerial inside the vehicle. 1. Clean the mounting location. 2. Put on the aerial mounting plate. 3. Mount the aerial. Pliers Spanner Pencil and eraser Aerial 3 Park the vehicle in a safe and level location. Notes: · Mount the aerial on a flat plane of the dash board or rear tray. · Some thermal reflection type or thermal absorption type glass may interrupt high frequency waves. If reception is poor with the aerial installed inside the car, try to mount the aerial outside the car. 4 5 Apply the brake and remove the ignition key. Mount the aerial on the roof. Clean dust and oil at the mounting location and mount the aerial. Aerial 6 Routing the aerial cable. 1. Route the cable using the provided cable clamps to take up the cable's slack. 2. Use the waterproof pad when running the cable under the vehicle's rubber gasket. 3. Attach the cable at several points using the remaining cable clamps. Notes: · The magnet of the aerial is very strong. Proceed cautiously to prevent any damage to the vehicle's body. Keep the magnet away from articles susceptible to magnetic fields such as credit cards, watches, etc. · Do not paint the aerial. Reception sensitivity may be decreased. Water proof pad Cable clamp 5 2. Connections 1 Disconnect the battery (­) terminal. 4 Wrap electrical tape around end of leads not used. Note: Some vehicles contain a vehicle control computer etc. in this case, contents of the computer memory may be erased when the battery (­) lead is disconnected. 5 Connect the battery (­) terminal and turn the ignition key to the ACC or ON position. Check to see if operation can be performed properly. (Is the power turned on? Is the illumination turned on?) You can check the language selection menu with the monitor. (Refer to the Owner's Manual for details.) Go to step 6 after checking is completed. 2 Cut terminal leads as required, and attach the solderless connectors to the leads. Note: For leads which need branching to the speed sensor, dimmer, parking brake, etc., use the solderless connectors. ON Preparation Navigation side lead 6 1 Solderless connector (supplied with the unit) Vehicle lead Turn the ignition key to the OFF position to turn off the power after completion of the check. OFF Navigation side lead Stopper 7 Pull out the ignition key and remove the battery terminal (­) again to begin installation procedure. 2 Pliers 3 Connect the power lead to this unit. Insert until a click sound is heard. 6 3-1. NVE-N077PS Wiring Diagram With CVA1003R/TME-M750 Battery Lead (Yellow) (5A) BATTERY ACC (Ignition) (Red) To the Acc power lead (5A) Ground (Black) Connect to a metal part of classis body with screw Dimmer In (Illumination) (+) (White/Blue) To the Illumination signal line Parking Brake (Yellow/Blue) To the parking brake signal line Reverse (+) (Orange/White) To reverse lights (+12V signal) Speed Sensor (Green/White) Connect to VSS (Digital or Analog 0V - 3V) * To the vehicle speed pulse line Mute (Pink/Skyblue) GPS Aerial (Included) Use this to connect a device having the IN-INT function (-) output for Audio Mute A 12345 6 7 8 9 10 Power Connector Pin Configuration Ground (Black) ACC (Ignition) (Red) Mute (Pink/Skyblue) Open Open Battery (Yellow) Dimmer In (Illumination) (White/Blue) Speed Sensor (Green/White) Parking Brake (Yellow/Blue) Reverse (Orange/White) 13P RGB Extension Cable Included 1 2 3 4 5 6 7 8 9 10 A MIC/SW TO DISP. EX-1 EX-2 POWER GPS ANT. 5 10 1 6 System expansion ports To RDS-TMC Receiver (OPTIONAL) NOTE: To connect an Alpine RDS-TMC Receiver, consult your Alpine dealer. * Improper connection of the speed pulse line may cause important safety features of the vehicle to fail (such as the brakes or air bags). Such failures may result in an accident and loss of life. We strongly recommend that the installation be performed by a trained, authorized Alpine dealer. 7 3-2. NVE-N077PS Wiring Diagram With IVX-C806/IVA-C800R/ IVX-M706/IVA-M700R/CVA-1006R/CVA-1005R Battery Lead (Yellow) (5A) BATTERY ACC (Ignition) (Red) To the Acc power lead (5A) Ground (Black) Connect to a metal part of classis body with screw Dimmer In (Illumination) (+) (White/Blue) To the Illumination signal line Parking Brake (Yellow/Blue) To the parking brake signal line Reverse (+) (Orange/White) To reverse lights (+12V signal) Speed Sensor (Green/White) Connect to VSS (Digital or Analog 0V - 3V) * To the vehicle speed pulse line Mute (Pink/Skyblue) GPS Aerial (Included) FM ANNTENA Use this to connect a device having the IN-INT function (-) output for Audio Mute R AUDIO L (MONO) AUX OUTPUT VIDEO 13P RGB Extension Cable Included AUX2 NAVIGATION INPUT DISPLAY OUTPUT AUX1 R AUDIO L (MONO) AUX OUTPUT VIDEO REMOTE OUT Ai- ...