FX· 6021 User's guide Mode d'emploi Guía del usuario Guia do Usuário The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions One-Year Limited Warranty Altec Lansing Technologies, Inc. warrants to the end user that all of its PC audio, TV or gaming speaker systems are free from defects in material and workmanship in the course of normal and reasonable use for a term of one year from the date of purchase. This warranty is the exclusive and only warranty in effect relative to Altec Lansing PC audio, TV or gaming speaker systems and any other warranties, either expressed or implied, are invalid. Neither Altec Lansing Technologies, Inc. nor any authorized Altec Lansing Technologies, Inc. reseller is responsible for any incidental damages incurred in the use of the speakers. (This limitation of incidental or consequential damage is not applicable where prohibited.) Altec Lansing Technologies, Inc.'s obligation under this warranty does not apply to any defect, malfunction or failure as a result of misuse, abuse, improper installation, use with faulty or improper equipment or the use of the speaker systems with any equipment for which they were not intended. The terms of this warranty apply only to PC audio, TV or gaming speaker systems when such speakers are returned to the respective authorized Altec Lansing Technologies, Inc. reseller where they were purchased. Under the terms of this warranty, the original consumer purchaser has certain legal rights and may have other rights, which vary worldwide. CAUTION To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Connecting the Power Cord (AC Wall Socket) Long slot is neutral (ground) side. Insert the wide blade into the ground side slot. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat. 9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The answers to most setup and performance questions can be found in the Troubleshooting guide. You can also consult the FAQs in the customer support section of our Web site at www.alteclansing.com. If you still can't find the information you need, please call our customer service team for assistance before returning the speakers to your retailer under their return policy. Customer service is available 7 days a week for your convenience. Our business hours are: Monday to Friday: 8:00 a.m. to 11:00 p.m. EST Saturday & Sunday: 9:00 a.m. to 5:00 p.m. EST 866-570-5702 Email: csupport@alteclansing.com For the most up-to-date information, be sure to check our Web site at www.alteclansing.com. © 2003 Altec Lansing Technologies, Inc. Designed and engineered in the USA and manufactured in our ISO9002/SA8000 certified factory. United States Patents 4429181 and 4625328 plus other patents pending. 1 FX6021 Three-Piece Powered Audio System PC AUDIO Connect the lime green audio input cable to your PC's sound card output jack (typically colored lime green and usually labeled "1" or "Main") as described in your PC/sound card documentation. PORTABLE AUDIO DEVICE (CD PLAYER, MP3 PLAYER, ETC.) Connect the lime green audio input cable to the line out of your portable device (if it has one) or to the device's headphone jack. GAME CONSOLE (PLAYSTATION® 2, XBOXTM, GAMECUBE®, ETC.) AND TV The primary input jacks are located on the subwoofer. Connect any audio source that has red (right) and white (left) RCA output jacks to the FX6021's red (right) and white (left) RCA input jacks. Note: For the clearest sound, try muting your TV's speakers when using the TV as an audio source. AUXILARY INPUT This auxiliary or secondary input is located on the wired controller. Connect any audio source that has a stereo 3.5mm plug (i.e. headphone style plug), including portable CD or MP3 players. Caution: Make sure the audio source features a line-out jack. This will ensure that the output is not amplified. Check the owner's manual for your audio device for more information. Note: You may need a cable that has RCA plugs on one end and a 3.5 mm stereo male plug on the other or 3.5 mm stereo plugs on both ends. These types of plugs may be purchased at most electronics stores. Welcome to Altec Lansing. We would like to thank you for purchasing the FX6021 Powered Audio System. With the fusion of pro audio linearray and tri-amp technologies, the "In-Concert" TM FX6021 uses three discrete amplifiers to power a total of twelve high performance fullrange micro drivers. To view other Altec Lansing Powered Audio Systems and accessories, please visit our website at www.alteclansing.com. Box Contents · 2 Satellites · 2 Satellite Bases · Subwoofer · Wired Controller · Wireless Remote · 3.5 mm Stereo Audio Cable · Manual Placing Speakers Subwoofer Warning: The subwoofer is NOT magnetically shielded, so it must be kept at least 2 feet (0.6m) from PC monitors, TV sets, computer hard drives or any other magnetic media (floppy disks, computer or audio tapes, etc.). The subwoofer is non-directional, so it doesn' t need to be placed in any particular location. Putting it on the floor close to a wall or in a corner will maximize bass efficiency and be sure to provide it with proper ventilation. Arrange the satellite speakers to suite your listening tastes. The speakers are magnetically shielded and can be placed close to a PC monitor or TV set without distorting the image. For optimal positioning the speakers can also pivot 15 degrees back or 5 degrees forward. Powering On 1. After all other connections are made plug the AC power cord from the back of the subwoofer into an AC outlet. 2. Turn on the audio source 3. Turn on the FX6021 speaker system by pressing the power button on the wired controller or wireless remote. A blue EQ LED on the wired controller will illuminate next to the power button indicating power is on. Push the "Power" button again to turn off the system. Note: To avoid hearing popping sounds when you turn on your FX6021 speaker system, always turn on your audio source first. Making Connections Warning: Do not insert the speaker system's power adapter plug into an AC outlet until all connections are made. Also, turn off your audio source connecting its outputs to the FX6021's inputs. To ensure first-time operation as expected, please carefully follow the connection sequence described below. 1. Locate the right satellite and one (1) satellite base. Insert the metal pins of the satellite base into the corresponding holes on the rear of the satellite. Be sure the groove on the base is facing down before inserting the base into the satellite. Run the cable through the channel on the base. Connect the orange connector into the "RIGHT" input on the rear of the subwoofer. 2. Locate the left satellite and one (1) satellite base. Insert the metal pins of the satellite base into the corresponding holes on the rear of the satellite. Be sure the groove on the base is facing down before inserting the base into the satellite. Run the cable through the channel on the base. Connect the brown connector into the "LEFT" input on the rear of the subwoofer. 3. Connect the grey-colored DIN connector from the wired controller into the grey "CONTROLLER" jack on the rear of the subwoofer. Note that the arrow on the DIN connector must face up. 4. Connect one end of the audio input cable (with lime green connectors at each end) to the matching lime green input plug on the back of the subwoofer, labeled INPUT. 5. Connect the other end of the audio input cable to your desired audio source. Using the Remote Control & Wired Controller Master Volume Control The knob on the wired controller is the master volume control for the speaker system. Turn the knob clockwise to increase the volume and counter-clockwise to decrease the volume. When using the remote press and hold the "+" button to increase the volume or press and hold the "­" button to decrease the volume. Blue EQ LED's will light up on the wired controller to indicate volume level. The number of LED's lit will increase as the volume increases to a maximum of 5 for full volume. Bass Press the bass button on the hardwired controller or wireless remote. A blue EQ LED will illuminate next to the bass button. When using the hardwired controller, turn the master volume knob clockwise to increase the bass and counter-clockwise to decrease the bass. When using the remote, press and hold the "+" button to increase the bass or press and hold the "­" button to decrease the bass. An LED will light up and move on the wired controller to indicate changing bass levels. The LED will reside in the far right position for maximum bass and in the far left position for minimum bass. After a few seconds, bass will default back to main volume. To return to bass control, press the bass button again. 2 Treble Press the treble button on the hardwired controller or wireless remote. A blue EQ LED will illuminate next to the treble button. When using the hardwired controller, turn the master volume knob clockwise to increase the treble and counter-clockwise to decrease the treble. When using the remote, press and hold "+" button to increase the treble or press and hold the "­" button to decrease the treble. An LED will light up and move on the wired controller to indicate changing treble levels. The LED will reside in the far right position for maximum treble and in the far left position for minimum treble. After a few seconds, treble will default back to main volume. To return to treble control, press the treble button again. Stand-by To mute the FX6021 press the stand-by button on the hardwired controller or wireless remote. The blue LED located next to the power button will turn off. To un-mute, press the stand-by button again. It is important to note that while in stand-by mode the system continues to receive power. To completely shut down the FX6021, press the standby button on the hardwired controller or wireless remote and then unplug the unit from the wall. Headphones To use headphones with the system, plug them into the labeled jack on the side of the wired controller. When headphones are connected, both satellites and the subwoofer are muted. WALL MOUNTING Remove the satellite base from the satellite. The satellite can be mounted to the wall using the key holes (top and bottom), or by using the threaded inserts on the rear of the satellite (threaded inserts require the purchase of a universal mounting kit.) System Specifications Sound Pressure Level (SPL): 105 dB Total Continuous Power: Front Speakers: Subwoofer: SUBWOOFER Driver: One 6.5" long-throw woofer 75 Watts RMS 12.5 Watts/channel @ 4 ohms @ 10% THD @ 180 ­ 15000 Hz 2 Channels Loaded 50 Watts @ 4 ohms @ 10% THD @ 40 ­ 180 Hz Single Channel Loaded POWER REQUIREMENTS USA, Canada and applicable Latin American countries: Europe, United Kingdom, applicable ...