User manual AMX AXC-REL8 8 RELAY CARD

Quick Start Guide AXC-REL8 Overview Devices that require a simple momentary or latching contact closure can be controlled with the AXC-REL8 Universal Eight Relay Card (FIG. 1). This card can operate up to 8 relay-controlled functions; cards can be linked together, allowing a larger number of functions. Adjacent relays on the card may be selectively commoned to reduce device wiring. Universal Eight Relay Card Commons The table below lists the commons for the AXC-REL8 if installed in the On position. Commons Commons CO1 - 2 CO2 - 3 CO3 - 4 CO4 - 5 CO5 - 6 CO6 - 7 Description Connects Common #1 to Common #2. Connects Common #2 to Common #3. Connects Common #3 to Common #4. Connects Common #4 to Common #5. Connects Common #5 to Common #6. Connects Common #6 to Common #7. Connects Common #7 to Common #8. FIG. 1 AXC-REL8 Universal Eight Relay Card (side view) CO7 - 8 Specifications The table below provides specification information for the AXC-REL8 (FG715). Specifications Power Consumption: Contact Closures: Relays: · 150 mA, 12 VDC · 8 per card · Single pole double throw (SPDT). · Each relay is individually assignable as normally open (NO) or normally closed (NC) via jumpers provided on the card. · JP1: Installed between center pin and NC, relay 1 is Normally Closed; installed between center pin and NO, relay 1 is Normally Open. · JP2: Same as JP1 for relays 2 - 8, respectively a jumper must be in one of these locations for each relay used. · CR1 - 8: Indicates energized condition of corresponding relay · 1 A @ 24 VAC / 28 VDC · 750 mA MAX resistive load. Relay Status LED Indicators The table below provides a description for the illumination of each relay LED. Refer to FIG. 2 for a visual reference of LED locations. Relay Status LEDs Relay LED # CR1 (top LED) CR2 CR3 CR4 CR5 CR6 CR7 CR8 Description Indicates the energized condition of relay 1. Indicates the energized condition of relay 2. Indicates the energized condition of relay 3. Indicates the energized condition of relay 4. Indicates the energized condition of relay 5. Indicates the energized condition of relay 6. Indicates the energized condition of relay 7. Indicates the energized condition of relay 8. Jumpers: LEDs: Contact Rating: Top LED Connections The table below lists the AXC-REL8 pinout connectors. Pinout Connectors Pinout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Description Common #1 Contact #1 Common #2 Contact #2 Common #3 Contact #3 Common #4 Contact #4 Common #5 Contact #5 Common #6 Contact #6 Common #7 Contact #7 Common #8 Contact #8 FIG. 2 AXC-REL8 Relay status locations AMX Corporation reserves the right to alter specifications without notice at any time. For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s). 060-004-2692 2/05 ©2005 AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 · 800.222.0193 · fax 469.624.7153 · technical support 800.932.6993 · www.amx.com