User manual AMX RADIA DIMMER ENCLOSURES WITH BREAKERS

Installation Sheet RDA-ENC6B and ENC12B The RDA-ENC6B (FG606-13) and RDA-ENC12B (FG606-14) enclosures provide secure mounting for all AMX Lighting and PROlink controllers, and lighting modules. The enclosures also contain circuit breakers. 0.75" (19.05 mm) 6.0" (152.4 mm) Dimmer Enclosures w/Breakers These enclosures are CE, UL, and C-UL approved. They include circuit breakers and terminals for multi-phase wiring. They also provide 18 knockouts for 1/2", 3/4", and 1" conduits. TOP VIEW RDA-ENC6B Configurations: - ENC6B/120 20 A Breakers - ENC6B/240 10 A Breakers RDA-ENC12B Configurations: SIDE VIEW - ENC12B/120 20 A Breakers - ENC12B/240 10 A Breakers RDK Configurations: - RDK-ENC6B with 1 RDC-PDC - RDK-ENC12B/240 2 RDC-PDC 24.0" (610 mm) RDA-ENC6B 24.0" (610 mm) RDA-ENC12B Sample RDK-ENC12B kit shown with 2 RDC-PDC 18.0" (457.2 mm) Top, side, and bottom views are the same for both enclosures. Note: LINE INPUTS: 140 A MAX PER ENCLOSURE Use 75° C copper conductors only. Torque terminals to 44 in-lbs. BOTTOM VIEW FIG. 1 Top, front, bottom, and side views of the RDA-ENC6B and RDA-ENC12B enclosures Installation Instructions: · · · · · · · · For indoor use only. Mount on vertical surface only. Maintain 12" (304.88 mm) minimum clearance above and below the enclosure. Route class 1 conductors through upper conduit knockouts. Route class 2 conductors through lower conduit knockouts. Use 75°C (167°F) copper conductors only. Install filler plate #28-10500 (RDA-EFP) in all unused openings. Install only UL approved modules (see the UL Number Cross Reference to AMX Lighting ID table on page 2). RDA-ENC6B: 16.5 lbs. (7.48 kg) RDA-ENC12B: 17.5 lbs. (7.94 kg) Configuration for right and left mounting brackets for all Radia enclosures. A to B Top slot B to C Maximum mounting screw size: #12 Bottom slot Enclosure Weights: · · FIG. 2 Bracket configuration Dimensions between center lines (from FIG. 2): RDA-ENC6B: · A to B = 16.0" (406.4 mm) · B to C = 22.88" (581.2 mm) RDA-ENC12B: · · A to B = 16.0" (406.4 mm) B to C = 22.88" (581.2 mm) Specifications · · · · · · · · · Maximum input wire #1/0 AWG (50mm²) Maximum line input is 140 A (per enclosure ) Torque input wire to 44 in-lbs. (5.0 N/m) Wire stripping length: 0.67 inches (17 mm) Input 1 feeds channels 1, 4, 7, and 10 Input 2a feeds channels 5 and 11 Input 2b feeds channels 2 and 8 Input 3 feeds channels 3, 6, 9, and 12 Breakers are UL 489 listed 10,000 AIC, 100% Switching Duty, Hydraulic-Magnetic Radia enclosures must be mounted on a vertical surface with a minimum of 12" (304.8 mm) clearance above and below the enclosure. The following section cross references the UL ID module numbers and AMX Lighting module IDs. The modules identified are the only ones that can be used in the RDAENC6B and RDA-ENC12B enclosures. UL Number Cross Reference to AMX Lighting ID UL ID AMX ID UL ID AMX ID UL ID AMX ID 28-10100 RDC-DC/120 28-10110 RDC-DC/240 28-10120 RDC-DC/277 28-10130 RDC-PDC/120 28-10200 RDM-INC 28-10210 RDM-2INC 28-10220 RDM-INC50 28-10230 RDM-ZC, RDM-2ZC 28-10300 RDM-MR60 28-10310 RDM-MDM 28-10340 RDA-CHK 28-10350 RDM-FDB RDM-2FDB RDM-3FDB RDM-HFDB 28-10360 RDM-DPSM UL Number Cross Reference to AMX Lighting ID (Cont.) UL ID AMX ID UL ID AMX ID UL ID AMX ID 28-10140 RDD-DM6/120 28-10260 RDM-SWM, RDM-2SWM, RDM-3SWM 28-10270 RDM-HSW, RDM-2HSW, RDM-3HSW 28-10370 RDM-DC, RDM-2DC, RDM-3DC RDM-HDC 28-10150 RDD-DM6/240 28-10160 RDD-DM6/277 28-10170 RDA-PSM/120 28-10133 RDC-PDC/240 28-10240 RDM-ZC50 Lighting Application Drawings Note: LINE INPUTS: 140 A MAX PER ENCLOSURE Use 75° C copper conductors only. Torque terminals to 44 in-lbs. FIG. 3 ENC6B and ENC12B Power Distribution FIG. 4 ENC6B and ENC12B Input Terminal Block Wiring AMX Corporation reserves the right to alter specifications without notice at any time. For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s). 043-019-2246 6/04 ©2002 AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 · 800.222.0193 · fax 469.624.7153 · technical support 800.932.6993 · www.amx.com 93-0606-13 REV: A