User manual AMX RADIA DIMMER ENCLOSURES

Installation Sheet Dimmer Enclosures RDA-ENC2, RDA-ENC4, and RDA-ENC6 The AMX LightingTM RDA-ENC2, RDA-ENC4, and RDA-ENC6 enclosures provide secure mounting for all Radia controllers/modules. The enclosures are CE, UL, and C-UL approved. RDA-ENC2 RDA-ENC4 RDA-ENC6 0.75" (19.05 mm) 6.0" (152.4 mm) Top View Side View (for all enclosures) 6.0" (152.4 mm) 12.0" (304.8 mm) Internal View 18.0" (457.2 mm) 12.0" (304.8 mm) Bottom View FIG. 1 Top, front, bottom, and side views of the RDA enclosures Installation Instructions: · · · · · · · · For indoor use only. Mount on vertical surface only. Maintain 12" (304.88 mm) minimum clearance above and below the enclosure. Route class 1 conductors through upper conduit knockouts. Route class 2 conductors through lower conduit knockouts. Use 75°C (167°F) copper conductors only. Install filler plate #28-10500 (RDA-EFP) in all unused openings. Install only UL approved modules (see the UL Number Cross Reference to AMX Lighting ID table). Dimensions between center lines (from FIG. 2): RDA-ENC2: · A to B = 5.25" (133.4 mm) · B to C = 11.0" (279.4 mm) RDA-ENC4: · A to B = 10.0" (254.0 mm) · B to C = 11.0" (279.4 mm) RDA-ENC6: · A to B = 16.0" (406.4 mm) · B to C = 11.0" (279.4 mm) Enclosure Weights: · RDA-ENC2: 4.5 lb. (2.04 kg) · RDA-ENC4: 7.5 lb. (3.40 kg) · RDA-ENC6: 9.5 lb. (4.31 kg) Radia enclosures must be mounted on a vertical surface with a minimum of 12" (304.8 mm) clearance above and below the enclosure. Configuration for right and left mounting brackets for all Radia enclosures. A to B Top slot B to C Maximum mounting screw size: #12 Bottom slot FIG. 2 Bracket configuration The following section provides a cross reference between the UL ID module numbers and AMX Lighting module IDs. The modules identified are the only modules that can be used in the RDA-ENC2, RDA-ENC4, and RDA-ENC6 enclosures. UL Number Cross Reference to AMX Lighting ID UL ID AMX ID UL ID AMX ID UL ID AMX ID 28-10100 RDC-DC/120 28-10150 RDD-DM6/240 28-10230 RDM-ZC, RDM-2ZC, RDM-PR, RDM-2PR 28-10110 RDC-DC/240 28-10310 RDM-MDM 28-10160 RDD-DM6/277 28-10120 RDC-DC/277 28-10340 RDA-CHK 28-10300 RDM-MR60 28-10240 RDM-ZC50 28-10170 RDA-PSM/120 28-10260 RDM-SWM, RDM-2SWM, RDM-3SWM 28-10130 RDC-PDC/ 120 28-10350 RDM-HFDB 28-10200 RDM-INC 28-10270 RDM-HSW, RDM-2HSW, RDM-3HSW 28-10133 RDC-PDC/240 10-28410 RDM-FDB, RDM-2FDB, RDM-3FDB 28-10280 RDM-MR, RDM-2MR, RDM-3MR 28-10220 RDM-INC50 10-28400 RDM-DC, RDM-2DC, RDM-3DC 28-10210 RDM-2INC 28-10360 RDM-DPSM 28-10140 RDD-DM6/ 120 28-10370 RDM-HDC 28-10290 RDM-MR35 AMX Corporation reserves the right to alter specifications without notice at any time. For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s). 043-019-2245 8/01 ©2001 AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX Corporation reserves the right to alter specifications without notice at any time. 3000 research drive, richardson, TX 75082 USA · 469.624.8000 · 800.222.0193 · fax 469.624.7153 · technical support 800.932.6993