CONTENT IMPORTANT SAFETY INSTRUCTIONS............................................................................... ...1 Precautions and Reminders......................................................................................2 Features and Function.............................................................................................4 Front Panel Control.................................................................................................5 Basic Installation.....................................................................................................6 Connection to other equipment..................................................................................7 Remote Control Function ...................................................................................................... ...9 OSD Menu Descriptions Main Menu .................................................................................................................. ....10 Setup Menu................................................................................................................. ....10 Video Menu ................................................................................................................. ....11 Audio Menu....................................................................................................11 Feature Menu..................................................................................................... .............12 EPG..............................................................................................................14 TVChannel arrangement....................................................................................14 Specifications........................................................................................................15 Troubleshooting ......................................................................................................................16 0 IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. Read and follow all instructions. Do not operate this apparatus near water. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not block any of the ventilation openings. Clean only with a dry cloth. Do not defeat the safety purpose of the polarized or grounding-type plug. .A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org Damage Requiring Service -The appliance should be serviced by qualified service personnel when: · The power supply cord or the plug has been damaged; or · Objects have fallen, or liquid has been spilled into the appliance; or · The appliance has been exposed to rain; or · The appliance does not appear to operate normally or exhibits a marked change in performance; or · The appliance has been dropped, or the enclosure damaged. 14. Tilt/Stability- All televisions must comply with recommended international safety standards for tilt and stability properties of its cabinet design. · Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product. · Do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury. 15. Wall or Ceiling Mounting- The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 16. Power Lines- An outdoor antenna should be located away from power lines. 17. Outdoor Antenna Grounding- If an outside antenna is connected to the receiver, make sure the antenna system is grounded so as to provide protection against voltage surges and built up of static charges. Section 810 of the National Electric Code, ANSI/NFPA No.70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure below. 18. Object and Liquid Entry- Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 19. Battery Usage CAUTION ­To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit: · Install all batteries correctly, with + and - aligned as marked on the unit. · Do not mix batteries (old and new or carbon and alkaline, etc.). · Remove batteries when the unit is not used for a long time. 20. Keep this manual for future reference 7. 8. 9. 10. 11. 12. 13. Example of Antenna Grounding as per NEC - National Electric Code Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) (NEC SECTION 810-21) GROUND CLAMPS ELECTRIC SERVICE EQUIPMENT POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) 1 Precautions and Reminders Do not place unit on uneven surfaces. Do not place the TV in confined spaces or in a box when using it. Unplug immediately if there is any malfunction, Unplug immediately if other foreign materials like no video, no audio, smoke or a bad odor. are put inside TV box or if the TV fell down. Do not throw any object like metals or flammable materials into the TV set. Prohibit/Avoid opening TV cabinet 2 Precautions and Reminders DO NOT use liquid cleansers or aerosol Avoid direct sunlight, dusty, high humidity and cleansers to clean the plasma display. Dilute a smoky areas. neutral detergent with water and wipe with a soft cloth or gently clean with some absorbent cotton. Remember to unplug the AC mains cord before cleaning the display. Make sure to unplug the unit when not in use Call service personnel to clean the internal for a long period of time (2 days). part of the TV once a year. Do not cover or block any vents and openings. Do not place the unit near water, such as Inadequate ventilation may shorten the life of bathtub, washbasin, kitchen sink laundry tub, the display unit and cause overheating. swimming pool or in a damp basement. Notice for Remote Control Avoid Dropping Avoid Dropping 1 4 2 3 1 Avoid Liquids 2 5 8 0 3 6 9 Avoid Aerosol Cleaners 1 4 7 2 5 8 0 3 6 9 5 8 0 6 4 9 7 7 3 Features and Function 42 inch107cmLarge Screen Flat Panel Plasma Display Panel Resolution: 1024 x 768 Pixels MAX Brightness of Panel: 1100 Cd/m2 MAX Contrast Ratio of Panel: 10000:1 View Angle: Greater than 160° Internal TV Tuner, Air2~69 channels Cable2~125 channels Frequency Range55.25MHz to 859.25MHz ATSC receiver, MPEG-2 decoder NTSC receiver, Video decoder Dual Video, Dual S-Video Dual Y Pb Pr 480i, 480P, 720P, 1080iHDTV Ready PC D-SUB 15Pin INPUT D-SUB Vertical refresh rate 50Hz to 85 Hz D-SUB Horizontal frequency 31KHz to 80KHz DVI-D SignalTMDSINPUT, Support HDTV, SDTV MIPS controller technology Auto Scan TV Channels Factory Presets Universal Power Supply designed for worldwide application 450 W (Power consumer) Closed Caption / V-chip For USA 4 Front Panel Control MODE MENU - VOL + - CH + IR: Remote Control Sensor. LED: Power Indicator. Power switch: Press to power on or power off the TV set . Mode: Press to select input signal modes or use as Enter in Menu operation. Menu: Press to enter Menu or exit Menu. Left: Press to decrease the sound volume level or move Left in Menu operation. Right: Press to increase the sound volume level or move Right in Menu operation. Down: Press to select the next lower Programme number or move Down in Menu operation. Up: Press to select the next higher Programme number or move up in Menu operation. 5 Basic Installation 1. Connect TV Cable and Power Cord to this PDP TV Set. 2. Plug Power Cord to your home power outlet. 3. Check front panel LED for proper power connection: Blue color indicates this TV set is powered on; Red color indicates this TV set is in standby state. 4. Push POWER on Remote Control or Power switch on Front panel controls to switch the TV from standby state to ON state. This TV will power on and you can see display on screen within a few seconds. 5. Once you see information displayed on screen, press TV button on Remote Control or MODE key on front panel continuously to select TV as input source. TV channel information will be displayed. 6. Use Auto channel search in "Setup Menu" to search all channels in your location. Refer to page 10 for "Setup Menu" operation procedure. 7. After Auto channel search is completed, press "CHup" or "CHdown" key on remote control to select the next lower or higher channel. Refer to the following pages for operating procedures: Remote Control ­ page 9. Setup Menu ­ page 10. TV Channel Arrangement ­ page 14. POWER KEY Ch14.0 12:00AM TV channel information 6 Connection to other equipment Please connect this TV Set to other equipment as picture below. You may have many types of equipment as: DVD, VCD, VCR, Set Top Box, X-Box and so on. (View from back of the TV set,left to right) INPUT CONNECTION OF VIDEO SIGNAL(DVD/VCD/VCR) AV1-INPUT s-video Y W R B s-video Y R W Connection to other equipment 7 Connection to other equipment We have 2 component signal input jacks: Y Cb Cr and Y Pb Pr. The R / L is Audio input for every Y Cb Cr and Y Pb Pr. If your DVD or Set Top Box have Y Cb Cr or Y Pb Pr output, you can connect it to Y Cb Cr or Y Pb Pr input jack. And select to Y Cb Cr or Y Pb Pr source input. Some DVD or Set Top Box need to set to Y Cb Cr or Y Pb Pr output Notice: If you see that display abnormality in screen, you need to check the cable connection and DVD setup. G B R R W INPUT CONNECTION OF PC SIGNAL(PC/DVD) Notice: If you see that display abnormality in screen, you need to check the cable connection and DVD setup. Notice: The PC output can not set out of range.The highest resolution input is 1280 X 1024 / 60Hz. Some PC models cannot be connected to the set. 24PIN DVI R/L INPUT 15PIN VGA R/L INPUT Notice:If your DVD doesn't have 3.5 earphone output jack,Please use cable from RCA to3.5 earphone jack to connect. D-SUB 15 Pin: Connect D-SUB signal cable VGA cable from PC to D-SUB jack at the back of this display. And connect the earphone cable from PC earphone output jack to AUDIO input jack near to the D-SUB jack. Setup: Use the key "Digital" Remote Control Transmitter or "MODE" on Front panel controls in key to select source to "VGA"state. Then turn on the PC. DVI-D: Connect DVI-D 24 Pin signal cableTMDS cablefrom equipment with DVI-D jack to the back of this display. And connect earphone cable from equipment with earphone output jack to AUDIO input jack near the DVI-D jack. Setup: Use the key "Digital" Remote Control Transmitter or "MODE" on Front panel controls in key to select source to "DVI"state. Then turn on the equipment. 8 Remote Control Function "POWER" The TV Set turn on /turn Wide Mode EPG POWER "Wide Mode" Normal, Zoom ,Wide, Cinema display select "EPG" Display the state, source "TV" TV source select, into TV state "SLEEP" Select timer into power down state. of ...