MPEG-2 / DVB(Digital Video Broadcasting ) compliant MP Layer I and II, CD quality audio sound Supports RS-232 port for S/W upgrade (115,200 bps) Separated TV/Radio/All List & Favorite Group List Offering 8,000 TV and radio channels DiSEqC 1.0/1.1/1.2 and USALS Supports multi-channel screen (Mosaic) Variable kind of utilities (Calendar, Calculator, Zoom In) Channel change effect mode (Blank, Fade-In/Out, Freeze) Two tuners PVR with PIP Supports Switching Rooms and Watching the Other Room Multi-channel recording(the recorded files of TV1 and TV2 are summed up to 4 files simultaneously. ) with 1 channel playback Watch two live streams or 1channel playback & 1 channel live stream MP3, PCM playback Time shift playback( Playback( . This function is supported to only TV1.) . This function isn't supported to TV1 and TV2 simultaneously.) and edit the recorded file Connects to PC via USB 2.0 Supports 2 CAMs of DVB Common Interface Standard 1 IR Remote(hereafter "RC1") X 1 RF Remote(hereafter "RC2") Control for TV2 viewers Vacuum Fluorescent Display(VFD) Supports Multi-Picture Screen(Mosaic) Simple message transmition function Ch1. Before You Begin | 7 Capable of receiving both SCPC and MCPC channels Powerful and easy functions for editing (Lock, Delete, Move, Rename Channel & Favorite group) Electronic Program Guide (EPG) for On Screen Channel Information 17 OSD Languages and 16Bit RGB OSD menu Auto searching & manual searching function Parental lock function (Install Lock/Menu Lock/ IRD Lock) Ergonomic full functions remote control & 8 buttons on the front panel Teletext and subtitle supported by VBI and OSD Channel editor & channel loader in PC environment Software transfer from receiver to receiver Total 40 configurable timer control S/PDIF for digital audio Picture In Graphics(PIG) Supports Game : Tetris, Block Out, Sokoban User Friendly OSD in your language with Help Sentence Free voltage (SMPS : AC100~240V/50~60Hz) 8 | AF-9400PV2R Users' Manual 1.2 Package Contents Please check to make sure the following contents are in the product package. Product contents may be subject to change. Cables not specified above must be purchased separately. Ch1. Before You Begin | 9 1.3 Names of Each Part 1.3.1 Front Panel 1. Power Switches the product on/off. 2. CH / Changes the TV/Radio channel Up/Down. 3. VOL / Increases or decreases TV/Radio volume level or change the value of an item in menu mode. 4. OK Selects a menu or confirms the user's action and displays the channel list during watching a TV. 5. MENU Displays the menu OSD. 6. EXIT Exits from the current menu or cancels the current operation in menu mode. 7. CI Slots Inserts two CI modules. 8. LED STANDBY: Lights in red to indicate that AF-9400PV2R is in Standby mode. This light is turned off when the product is in operation. Normal: Lights in green to indicate that the channel is searched properly. RCU: Lights in orange to indicate that the remote control is operated properly. 10 | AF-9400PV2R Users' Manual 1.3.2 Rear Panel 1. LNB IN 1, 2 Connect a coaxial cable of your LNB to this connector up to two cables. 2. LNB OUT 1, 2 Connect LNB OUT to another set-top box or LNB OUT1 to LNB IN2 via a Loop-through cable 3. USB ( ) Connect USB to your PC to copy MP3 file on PC. 4. AUDIO L/R ( ) Connect AUDIO L/R to the matching Audio Inputs of your TV/VCR via a RCA cable. 5. VIDEO ( ) Connect VIDEO to video input of your TV or VCR via a RCA cable. 6. 0/12V Connect 0/12V adapter to control output voltage for external switch. 7. VCR SCART ( ) Connect this connector to your VCR via a SCART cable. 8. TV SCART ( ) Connect this connector to your TV via a SCART cable. 9. RS-232C Connect RS-232C to your PC via a serial cable to upgrade AF-9400PV2R software. 10. SVHS ( ) Connect S-VHS to S-VHS video input of your TV or VCR via a S-VHS cable. Ch1. Before You Begin | 11 11. S/PDIF ( ) Connect S/PDIF to audio input of your amplifier with optical digital port via an optical cable. ) 12. ANT IN ( Connect ANT IN to your TV antenna or cable TV system. ) 13. TV OUT ( Connect TV OUT to your TV antenna input, and then the room changing function is in operation. 14. RF RCU RECEIVER ( ) Connect the port to the phone-jack of RF receiver. 15. VIDEO ( ) Connect VIDEO to video input of TV2 or VCR via a RCA cable. 16. AUDIO L/R ( ) Connect AUDIO L/R to the matching Audio Inputs of your TV2/VCR via a RCA cable. 17. POWER Turn the AF-9400PV2R On/Off. 12 | AF-9400PV2R Users' Manual 1.4 Names of Remote Button 1.4.1 Names of Remote Button STANDBY To switch the product On or Standby. MUTE ( ) To mute the sound. NUMERICAL BUTTONS To enter a TV/Radio channel number or characters. HELP To display all help icons. TV/RAD To switch the product TV or Radio. SAT To select the specific satellite. FAV You can register the favorite channels by pressing the "MENU" button, and then change the channel mode by pressing the "FAV" button. TV/STB To select the input source between satellite and TV. Recall ( ) To return to the previous chosen channel. MENU To display the menu OSD. EPG To display the Electronic Program Guide. Press again to return to the normal mode. Ch1. Before You Begin | 13 CH / To change the TV/radio channels Up/Down. VOL / To increase or decrease TV/Radio volume level or change the value of an item with preprogrammed values. The "" button can be used as a backspace to cancel the numerical input. OK To select a menu or confirm the user's action and display the channel list during watching a program. You can watch all channels using the channel list. EXIT/ZOOM To exit from the current menu or cancel the current operation in menu state. To zoom in/out the screen during watching a program. INFO To display the information about the channel. PAGE ( ) Teletext ( , hereafter "Yellow") To display the teletext information about the channel if applicable. Subtitle ( , hereafter "Blue") To display the provided subtitle language lists of the current channel. PVR To show the recorded file or MP3 file list. Fast Rewind/Forward ( ) To rewind/forward the playback during the recorded , the file playback. Whenever you press forward playback speed increases by 4 steps (x 2, x , the 4, x 8, x16). And whenever you press rewind playback speed increases by 4 steps (x 1, x 2, x 4, x8). If you press the button in the progress bar state, AF-9400PV2R resumes to the playback with normal speed after 20 seconds backward/forward rewind. Playback ( ) To change the TV/Radio channel lists by the page. VOL (+ - ) To change the TV/Radio volume without displaying the OSD. CH (/) To change the TV/Radio channels without displaying the OSD. Audio Language ( , hereafter "Red") To show the progress bar. If you press the button in the trick mode or paused state, AF-9400PV2R resumes to the playback with normal speed. Slow Rewind/Forward ( ) To change the playback speed into the slow motion mode. Pause ( ) To pause the playback. Stop ( ) To display the provided audio language lists of the current channel. Sound Mode ( , hereafter "Green") To stop the playback or the recording. Recording ( ) To select the sound mode(stereo, left, or right). To record the current channel or show the record menu in the recording state. 14 | AF-9400PVR Users' Manual Repeat ( ) To show the PIP channel list. Swapping PIP and Main Screen ( ) Whenever you press the button, the repeat mode changes sequentially such as a specified block repeatall block repeat the repeat mode Off. Cutting Data ( ) To swap between the PIP screen and the Main screen. Changing the Position of the PIP ( To change the position of the PIP screen. ) To cut the desired section from the recorded file. Bookmark ( ) To add or delete the current position as a bookmark. Up to 64 bookmarks for one recorded file can be set up. Changing the Position of the Bookmark ( ) To go to the next bookmark position. Showing and changing the Size of the PIP ( ) Whenever you press the button, the Picture in Picture(PIP) mode changes sequentially such as showing the PIP on the screenchanging the size of the PIP screenthe PIP mode Off. Showing the PIP List ( ) Switching Rooms ( ) To switch rooms between the TV1 and the TV2. Whenever you press the button, you can watch the other room's program and exchange the various configuration of TV such as Favorite channel, Lock, Language, and etc. At the other room, they can also watch your program. Watching the Other Room (RC1: RC2: ) , Whenever you press the button, you can watch the other room's(TV1 or TV2) program. MESSAGE ( ) Users can choose and send a short message from the list for a simple dialogue : How to use of 2 RF battery 2 RF remote control is supplied two battery and RF module. You can show these under the RF receiver unit. You should open the cover under the RFreceiver. One is battery only, the other is battery unit. You must use the battery unit and only battery is have to charge over 8H (Actually all of battery are have to charge before using) : Angle of remote control use The IR remote control can be used at a distance of up to 7 to 10 meters, and at an angle of 30 degrees from the remote control led. The RF remote control(hereafter RC2) can be used at Maximum 30meters distance from the RF receiver. Ch1. Before You Begin | 15 1.4.2 Remote Control Extender 1) Introduction This Remote Control Extender uses the smartest and easiest technology in extending the remote control operation. By installing the transmitter in the battery pocket only, your remote control now detects the key signals and transmits them far away. This extender kit (called Remote Control Extender) includes transmitter (battery type), receiver (UFO shape), two 2/3 rechargeable batteries and AAA sleeve. *3/2 AAA *RF transmitter Rechargeable battery *RF receiver Then, the upgraded remote controls with RF transmitter can operate through door, windows, floors and walls. And this extender kit removes the worry about line of sight requirements. When the RF transmitter is installed, the remote control still transmits the normal infrared signal like a normal remote control. That is, your remote control will transmit radio frequency (RF), regardless of distance or line or sight. 2) Installing and Operating Cases. 1. living to bed room - control satellite / cable in living room from bed room 16 | AF-9400PV2R Users' Manual 2. floor to floor - control satellite / cable in living room from the second floor 3) Installing the RF Transmitter Your remote control will use several AAA size batteries, normally 2 to 4. Please install RF transmitter instead of a battery (one of batteries only). Below shows the battery AAA size using in normal remote control. AAA battery : Install AAA size transmitter like a normal AAA battery 4) Installing the Receiver Ch2. Connections | 17 5) Function Switch Selection (A, B, C) You will find slide switch on the bottom of receiver if you remove the plastic case. The positions A, B, C are used to set the receiver to different remote controls. The factory setting is on position C (Most of remote control use position C) A: 56KHz (a few special remote) B: 38KHz (most of remote controls) C: sensitivity lower (external interference etc) 6) erference To determine whether your extender is causing the interference. If your receiver does not function properly, the two LEDs(A&B) will blink continuously or one LED will blink even without you using a remote control. IF THIS OCCURS PLEASE SEE BELOW. 1. Move your extender away from the receiver and check + realign. 2. Connect your extender to an outlet on a different electrical circuit from the receiver 3. Reduce the antenna length. 4. Select position "C" of slide switch on the back of the receiver. Please remove the plastic cover first. 5. If you cannot eliminate the interference, please contact your dealer. 7) echarging Battery Your RF transmitter is installed with small recharging battery (2/3 AAA size), and the performance of the extender deteriorates (the LEDs do not blink when you press the remote control), you need to recharge (replace) the battery. 1. Remove the RF transmitter from your remote control and take rechargeable battery out. 2. Find the recharging pocket on the bottom of receiver. There should be an extra battery, fully charged already in the pocket. 18 | AF-9400PV2R Users' Manual 3. Install the full-charged battery in transmitter and insert old battery into the 2/3 AAA pocket for recharging. Lose the cover. While the battery is recharging, the LED CHG (BAT) will blink in the receiver. LED will blink when the recharging battery is inserted in the pocket. Full recharging time is approx. 12 hours and 6-8 hours when the battery is not fully flat. After replacement of rechargeable battery, you need to test the function. If you feel the same distance or working problem, replace normal battery (AAA) with new one. -- Caution -1. 2. Do not use a normal battery in recharging pocket. Only use a rechargeable battery. 8) Care Keep the extender dry, if it gets wet, wipe it dry immediately. Use and store the extender only in normal temperature environments. Handle the extender carefully and do not drop it. Keep the extender away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Specifications Operating range: Up to 30+netres(100 feet) Operating frequency: 433.92MHz Battery (included): two 1.2V 2/3AAA (Rechargeable) Worldwide patents pending. CE certificate: EMC directive 89/336/EEC FCC ID#: SB7AAA IC#: 5216A-AAA Ch2. Connections | 19 Chapter 2 Connections 20 | AF-9400PV2R Users' Manual This chapter describes how to connect the product to your home entertainment system. Choose the most appropriate procedure depending on your environments. : If you encounter with any problems or have any questions during connecting the product, please contact your local product distributor. 2.1 Connecting a TV & VCR [ For TV1 ] 1. Connecting a TV with RF ( ) 1) Connect the TV antenna to the ANT IN of the product. 2) Connect the RF-IN of TV to the TV OUT of the product. 3) Connect the Video and Audio of TV to the VIDEO and AUDIO L/R of the product. 4) Go to 2.2 Connecting to Dish, and then connect your dish.