User manual ARISTON AQXL 85

AQXL 85 Installation GB Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual remains with the machine so that the new owner may benefit from the advice contained within it. contains important information regarding the safe installation, use and maintenance of the appliance. the installation process in the bag containing this booklet. If positioned on a fitted carpet or a rug, adjust the feet in such a way as to allow room for air to circulate and provide ventilation beneath the washing machine. Please read this instruction manual carefully it Connecting the cold water and electricity supplies Connecting the water inlet hose You will find the guarantee and other details relating to Unpacking and levelling Unpacking Before connecting the inlet hose to the cold water supply, allow the water to flow from the tap until it runs clear. 1. Connect the inlet hose to the machine, by screwing it into the cold water inlet on the upper right hand side of the back of the machine (see figure). 1. Once the washing machine has been removed from the packaging, check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process. 2. Remove the 4 transit bolts used during transportation and the corresponding spacers on the back of the machine (see figure). A 3. Having removed the 4 bolts use the 4 plastic blanking plates to cover the 4 holes. 4. Keep all the pieces; if the washing machine is transported in future, the transit bolts and spacers will have to be replaced in order to avoid damaging the inside of the machine. 2. Place the seal A (provided in the bag) on the end of the inlet hose and screw it to a cold water tap with a 3/4 BSP threaded connection (see figure). 3. Make sure there are no kinks or bends in the inlet hose. Packaging materials should not be used as toys by children. Levelling The water pressure at the tap must fall within the values indicated in the Technical data table (see next page). 1. Position the washing machine on a level and sturdy floor, without resting it against walls or cabinets. 2. If the floor is uneven, the feet of the appliance may be adjusted until it reaches a perfectly horizontal position (the angle of inclination must not exceed 2 degrees). If the water inlet hose is not long enough, contact a specialist store or an authorised technician. the machine. Always use the new water inlet hoses supplied with If the appliance is levelled correctly it will be more stable and much less likely to cause vibrations and noise during the spin cycle. 2 65 - 100 cm AQXL 85 up to 800 rotations per minutes Description of the machine EN DOOR DOOR HANDLE CONTROL PANEL KICK STRIP ADJUSTABLE FEET DOOR DETERGENT DISPENSER: Always use the handle to open the door (see figure). This is inside the machine and may be accessed by opening the door. For information relating to detergents, please refer to the chapter entitled Detergents and laundry. 20 1. pre-wash compartment: use powder detergent. 1 2. main wash compartment: use 2 powder or liquid detergent. If you intend to use liquid detergent, we recommend that it is poured into the compartment immediately before the wash cycle is started. compartment for additives: for fabric softener or other liquid washing additives. Do not exceed the maximum level indicated by the grille, and dilute concentrated fabric softeners. Detergents and additives must be specific to frontloading machines. 4 Control panel OPTION WASH CYCLE PHASE icons GB buttons and indicator lights PROGRAMME knob START/PAUSE button with indicator light ON-OFF/CANCEL button with indicator light TEMPERATURE button DELAYED START button button ECO indicator light DOOR indicator light CHILD LOCK button and indicator light SPIN SPEED LOCK ON-OFF/CANCEL button with indicator light : press the button briefly to switch the machine on or off. The green indicator light shows that the machine is switched on. To switch the washing machine off during a wash cycle, press and hold the button for approximately 2 seconds; pressing the button quickly or accidentally will not switch the machine off. If the machine is switched off during a wash cycle, the programme will be cancelled. PROGRAMME knob: this can be rotated in both directions. To set a more suitable programme, please refer to the Table of Programmes. The knob is locked into position during the wash cycle. button: press this button to TEMPERATURE adjust the temperature; the value will be identified by the indicator lights above it (see Running a wash cycle). button: press this button to adjust SPIN SPEED the spin value or to exclude this part of the programme; the value will be identified by the indicator lights above it (see Running a wash cycle). button: press to set a delayed DELAYED START start time for the selected programme; the delay time will be identified by the indicator lights above (see Running a wash cycle). OPTION buttons and indicator lights: may be used to select any of the available options. The indicator light corresponding to the selected option will remain lit (see Running a wash cycle). WASH CYCLE PHASE icons: these light up to provide an indication of the progress of the wash - Rinse - Spin - Final draining cycle (Wash ). phase lights up when the cycle has finished. The text START/PAUSE button with indicator light: when the green indicator light flashes slowly, press the button to start the wash cycle. When the cycle has started, the indicator light is illuminated in a fixed manner. To pause the wash cycle, press the button again; the indicator light will turn orange and begin to flash indicator light is off, again. If the Door Locked the porthole door may be opened. To restart the wash cycle from the point at which it was interrupted, press the button again. indicator light: this indicates that DOOR LOCK the porthole door is locked. To open the door, pause the wash cycle (see following page). button and indicator light: this is CHILD LOCK used to enable or disable the Child lock function, by pressing the button for approximately 2 seconds. When the indicator light is illuminated, the control panel is locked. This avoids accidental changes being made to the wash cycles, especially where children are at home. icon lights up when the ECO indicator light: the electricity saving reaches at least 10% (this can be achieved by adjusting the wash cycle settings). 5 Running a wash cycle GB NOTE: the first time you use the washing machine, add detergent and run an empty 90°C cotton wash cycle without the pre-wash phase. 1. SWITCH ON THE MACHINE. Press the button. All the indicator lights will illuminate for 1 second, after which the light corresponding to the button will remain lit constantly, while the START/PAUSE indicator light will flash slowly. 2. LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure that the maximum load quantity indicated in the table of programmes (below) is not exceeded. 3. MEASURE OUT THE DETERGENT. Pull out the drawer and pour the detergent into the relevant compartments as described in Description of the machine. 4. CLOSE THE PORTHOLE DOOR. 5. CHOOSE THE PROGRAMME. Turn the PROGRAMME knob left or right to select the required programme, to which a set temperature and spin speed are linked (these values may all be modified). 6. PERSONALISE THE WASH CYCLE. Use the relevant buttons on the control panel: Modify the temperature and/or the spin speed. The machine automatically selects the temperature and the maximum spin speed for the programme set and these values may not be button, the tempeincreased. By pressing the rature can be progressively reduced or even set to cold wash . By pressing the button, the spin speed can be progressively reduced or even . If the buttons are pressed eliminated altogether again the maximum values are restored. Modify the cycle caracteristics. Press the OPTION buttons to personalise the wash cycle according to your own requirements. Press the button to activate the option; the corresponding indicator light will illuminate. Press the button again to deactivate the option; the indicator light will switch off. If the selected option is not compatible with the set programme, the indicator light will flash and the option will not be activated. If the selected option is not compatible with another previously selected option, the indicator light corresponding to the first option will flash and only the second option will be activated (the corresponding indicator light will remain lit in a fixed manner). 7. START THE PROGRAMME. Press the START/ PAUSE button. The corresponding indicator light remains lit in a fixed manner and the porthole door locks (the DOOR LOCK indicator light illuminates). The icons corresponding to the different wash phases will light up during the cycle, indicating the progress. To change a programme while a cycle is in progress, pause the washing machine by pressing the START/PAUSE button; then select the desired cycle and press the START/PAUSE button again. To open the door while a cycle is in progress press the START/PAUSE button; if the DOOR LOCK indicator light switches off it is possible to open the door. Press the START/PAUSE button again to restart the programme from the point at which it was interrupted. 8. PROGRAMME END. The text END lights up to indicate that the programme has ended. The porthole door may be opened immediately. If the START/PAUSE button flashes, press the button to end the cycle. open the door, unload the laundry and switch off the machine. Exception: if the WHITE COTTON programme is selected, the temperature can be increased up to a value of 90°C. Setting a delayed start. To set the "delayed start" option for the program you have selected, press the button until the indicator light for the desired delay time is illuminated. On pressing the button four times, this function will deactivate. N.B.: once the START/PAUSE button is pressed the "delayed start" indicator light will flash (the time delay value may only be changed by decreasing the time). If you wish to cancel a cycle that has already begun, press and hold the button. The cycle will be stopped and the machine will switch off. BAG FOR QUILTS, CURTAINS AND DELICATE GARMENTS Ariston has made it easier for you to wash even the most valuable and delicate garments in complete confidence thanks to the special bag which protects the laundry (this is supplied with the machine). We recommend that the bag is used every time you wash quilts and padded items with an outer layer made using synthetic material. 6 800 800 Detergents and laundry EN Detergent The type and quantity of detergent used depends on the type of fabric (cotton, wool, silk...), its colour, the temperature of the wash, the level of soiling and the hardness of the water in the area. Measuring out the detergent carefully will avoid accidental spills and help to protect the environment: although they may be biodegradable, detergents contain elements that alter the balance of nature. We recommend: the use of powder detergents for white cotton garments and for pre-wash phases; Use only detergents designed for Front Load washing machines, otherwise too much foam may be produced resulting in poor wash performance and possible damage to the internal components of your machine. Liquid detergents must clearly state Low Suds and be suitable for Front Load Washers. Dosage: Due to their lower water consumption, front loaders do not require as much detergent as top loaders. The detergent must be measured out into the relevant compartment, or into the detergent dosing ball which will be placed directly into the drum of the machine. In this case the Cotton cycle with pre-wash phase may not be selected. Wool: Ariston is the only washing machine to have obtained the prestigious Woolmark Platinum Care mark of recognition (M.0508) from The Woolmark Company, which certifies the machine washing of woollen garments, where the label states "hand wash (max. 1kg). The wool programme offers you only" peace of mind when washing woollen garments with optimal performance. Wool detergents not specifically stating use with front loading machines should be used only in very small quantities (less than stated) as they can cause too much foaming which will reduce washing performance. Duvets: to wash single duvets (the weight of which should not exceed 2 kg), cushions or clothes padded with goose down such as puffa jackets, use the special "Duvets" programme. We recommend that duvets are placed in the drum with their edges folded inwards (see figure) and that no more than ¾ of the total volume of the drum is used. To achieve the best results, we recommend that a liquid detergent is used in conjunction with the detergent dispenser drawer. Preparing the laundry Unfold all items of laundry before placing them in the machine. Divide the laundry according to type of material (the symbol on the garment label) and colour, making sure that whites are separated from coloured garments. Empty all pockets and check for loose buttons. Do not exceed the values indicated in the Table of Programmes, which refer to the weight of the laundry items when they are dry. 1 1 1 1 1 1 1 sheet pillowcase tablecloth bathrobe towel pair of jeans shirt 400 150 400 900 150 400 150 500 g 200 g 500 g 1200 g 250 g 500 g 200 g How much does your laundry weigh? Quilts: to wash quilts with a synthetic outer layer, use the bag provided and set the programme to "Duvets". Stubborn stains: for stubborn stains we recommend pre-treating fabric with a commercial fabric stain remover, carefully following the instructions on the product label. Load-balancing system Before every spin cycle, to avoid excessive vibrations and to distribute the load in a uniform manner, the drum rotates continuously at a speed which is slightly faster than the normal washing speed. If, after several attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set frequency. If the load is excessively unbalanced, the washing machine continues at distribution speed only instead of the full spin speed. In order to achieve better load distribution and balance, we recommend that large and small garments are mixed when placing the laundry in the machine. Washing advice for laundry type Shirts: use a suitable programme to wash shirts made from different fabrics and in different colours. This will guarantee that these garments are looked after properly. Silk: use the gentle "Silk" programme designed for silk and delicate garments as this helps to avoid damaging your delicate fabric. We recommend the use of special detergents designed for silk or delicate garments. Curtains: these should be folded and placed inside the bag provided. Use the "Silk" programme. 8 Precautions and tips This machine was designed and manufactured in compliance with current international safety standards. The following advice is provided for safety reasons and should be read carefully. Opening the door manually If it is not possible to open the porthole door due to a powercut and you wish to hang out the laundry, proceed as follows: 1. Remove the plug from the electricity socket; 2. Make sure that the water level inside the machine is lower than the door opening; if this is not the case remove excess water using the water outlet hose, collecting it in a bucket as shown in the figure; 3. Remove the kick strip on the front of the washing machine using a screwdriver (see figure); EN General safety This appliance was designed for domestic use inside the home and is not intended for commercial or industrial use. The washing machine must be used by adults only, in accordance with the instructions provided in this booklet. Do not touch the machine when barefoot or with wet or damp hands or feet. When unplugging the appliance, always pull the plug from the mains socket; do not pull on the cable. Do not touch the drained water as it may reach extremely high temperatures. Never force the porthole door: doing so may damage the safety lock mechanism designed to prevent the door being opened accidentally. If the appliance breaks down, under no circumatances must you attempt to carry out the repairs yourself. Keep children well away from the machine while it is in operation. If the machine must be moved, work in a group of two or three people and handle it very carefully. Never attempt to move the appliance without the help of another person, because it is very heavy. Make sure that the drum is empty before loading laundry into the appliance. 20 Disposal When disposing of the packaging material: observe local legislation so that the packaging may be reused. Disposing of an old washing machine: before scrapping your appliance, cut the power supply cable and remove the appliance door. 4. Using the tab shown in the figure, pull outwards until the plastic brace comes away; pull it downwards until you hear a click, which indicates that the door is unlocked; 5. Open the door; if this is still not possible, repeat the process; 6. Replace the kick strip, making sure that the hooks are positioned in the right slots before pushing the panel towards the machine. 9 Care and maintenance EN Turning off the water and electricity supplies Turn off the water tap after every wash. This limits wear and tear on the machines water supply and prevents leaks. Disconnect the appliance from the electricity supply before cleaning it and before performing any maintenance work on it. remove the plug from the socket. To access the filter-chamber: 1. Remove the kick strip on the front of the machine using a screwdriver (see figure); Cleaning the machine The exterior of the appliance and all rubber parts may be cleaned using a cloth soaked in warm soapy water. Do not use solvents or abrasive products. 2. Position a container under the screw cap to collect the drained water correctly (see figure). Expect approximately 1.5 litres if the cycle has finished completely; 3. Unscrew the cover, turning it in an anticlockwise direction (see figure); 4. Clean the inside thoroughly; 5. Screw the cover back on; 6. Replace the kick strip, making sure that the hooks are positioned in the right slots before pushing the panel towards the machine. Cleaning the detergent dispenser drawer 1 To remove the drawer, press the lever (1) and pull it outwards (2) (see figure). Wash the drawer under running water; this should be done regularly. 2 Drum maintenance Always leave the porthole door ajar to prevent unpleasant odours from forming. Checking the water inlet hose Check the water inlet hose at least once a year. If there are any cracks, replace it immediately: the high water pressure used by the wash cycles could cause a cracked hose to split open. Cleaning the pump The washing machine is fitted with a self-cleaning pump which does not require regular maintenance. However, it may become blocked due to foreign objects (coins, buttons, hair clips, etc) falling into the filter-chamber that protects the pump. This situation will normally be indicated by Temperature LED 1 (No Heat) & LED 3 (40°) been lighted up simultaneously. To clear the blockage, follow the below steps. Make sure that the wash cycle has finished and 10 Troubleshooting From time to time your machine may not operate as it should. Before calling for Assistance (see Assistance), make sure that the problem cannot be resolved easily using the following list. EN Malfunction: The washing machine will not switch on and no lights appear on the control panel. The wash cycle does not begin. The washing machines fails to fill with water. Possible causes / Solutions: The plug has not been inserted into the electrical socket properly or there is no power in the house or electrical socket. There is no power in the house. The porthole door has not been shut properly. The START/PAUSE button has not been pressed. The water tap has not been turned on. The water inlet hose is not connected to the tap. The hose is kinked. The water tap has not been turned on. There is no water in the house. The water pressure is insufficient. The START/PAUSE button has not been pressed. The machine continuously fills and drains water. The end of the outlet hose has not been fitted at a height between 65 and 100 cm from the floor (see Installation). The free end of the hose is underwater (see Installation). If If the dwelling is on one of the upper floors of a building, there may be problems relating to water drainage, causing the washing machine to load and drain water continuously. Special anti-draining valves are available in shops and help to avoid this inconvenience. The water drainage system is not fitted with a breather pipe. The programme does not include a draining phase: some programmes require manual draining (see Programmes and options). The Reduced creases option is enabled: to complete the programme, press the START/PAUSE button (see Programmes and options). The outlet hose is bent (see Installation). The drainage duct is clogged. The drum was not unlocked properly when the appliance was installed (see Installation). The washing machine is not level (see Installation). The washing machine is trapped between cabinets and a wall (see Installation). The load is not balanced properly (see Description of the machine). The water inlet hose is not screwed on to the tap correctly (see Installation). The detergent dispenser drawer is blocked (for instructions on how to clean it, see Care and maintenance). The outlet hose has not been secured properly (see Installation). Switch off the machine and unplug the appliance; wait for approximately 1 minute then switch it on again. If the problem persists, contact Assistance. The detergent is not designed for machine washing (the packaging should state that the product is for washing by machine, for washing by hand or machine or similar). Too much detergent was used. Follow the manual unlocking procedure (see Precautions and tips). Drain pump may be blocked, see Cleaning the pump under the Care and Maintenance chapter. If the problem persists after the above checks have been carried out, shut off the water tap, switch off the machine and contact Assistance. 11 The machine does not drain or spin. The washing machine vibrates too much during the spin cycle. The washing machine leaks. The icons corresponding to the Wash Cycle Phase flash rapidly at the same time as the ON/OFF indicator light. There is too much foam. The washing machine door remains locked. Temperature LED 1 (No Heat) & LED 3 (40°) been lighted up simultaneously. Assistance EN Before contacting Assistance: Check whether you can resolve the problem on your own (see Troubleshooting); Restart the programme to check whether the problem has been overcome; If this is not the case, contact the Authorised Technical Assistance Centre; 195056732.01 12/2006 - Xerox Business Services If the machine has been installed or used incorrectly, you may be charged for the maintenance callout service. Never use the services of an unauthorised technician. Have the following information ready: The type of problem experienced; The appliance model (Mod.); The serial number (S/N); This information can be found on the appliance data label. The label can be located on the machine behind the door, or behind the product itself, and may also be found on labels that come with installation documents. For ease of service, having all the information noted from the data plate will aid customer service staff in assisting to your call. 12