775S61 User Manual Version 1.0 Published September 2004 Copyright©2004 ASRock INC. All rights reserved. 1 Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. Disclaimer: Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. With respect to the contents of this manual, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the manual or product. ASRock Website: http://www.asrock.com 2 Contents 1 Introduction .................................................... 4 1.1 Package Contents ........................................................... 1.2 Specifications ................................................................. 1.3 Motherboard Layout ....................................................... 1.4 ASRock I/OTM ................................................................... 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Screw Holes ................................................................... Pre-installation Precautions ............................................ CPU Installation ............................................................... Installation of Heatsink and CPU fan .............................. Installation of Memory Modules (DIMM) .......................... Expansion Slots .............................................................. Jumpers Setup ................................................................ Onboard Headers and Connectors ................................ 4 5 7 8 9 9 10 12 13 14 15 16 18 18 18 19 21 2 Installation ...................................................... 9 3 BIOS Setup ...................................................... 18 3.1 BIOS Setup Utility ............................................................ 3.1.1 BIOS Menu Bar ..................................................... 3.1.2 Legend Bar ........................................................... 3.2 Main Menu ....................................................................... 3.3 Advanced, Security, Power, Boot, and Exit Menus ...... 4 Software Support ........................................... 22 4.1 Installing Operating System ............................................ 22 4.2 Support CD Information ................................................... 22 4.2.1 Running Support CD ............................................. 22 4.2.2 Drivers Menu ........................................................ 22 4.2.3 Utilities Menu ......................................................... 22 4.2.4 ASRock "PC-DIY Live Demo" Program ................. 22 4.2.5 "LGA 775 CPU Installation Live Demo" Program...... 22 4.2.6 Contact Information ............................................... 22 Appendix ........................................................... 23 1. 2. 3. 4. 5. Advanced Menu ............................................................. Security Menu ................................................................. Power Menu ................................................................... Boot Menu ....................................................................... Exit Menu ......................................................................... 23 28 29 30 31 3 Chapter 1 Introduction Thank you for purchasing ASRock 775S61 motherboard, a reliable motherboard produced under ASRock's consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock's commitment to quality and endurance. Chapter 1 and 2 of this manual contain introduction of the motherboard and step-bystep installation guide for new DIY system builders. Chapter 3 and 4 contain basic BIOS setup and Support CD information. For advanced users' reference, the Appendix appearing on page 23 offers more advanced BIOS setup information. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest memory and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com 1.1 Package Contents ASRock 775S61 Motherboard (Micro ATX Form Factor: 9.6-in x 9.0-in, 24.4 cm x 22.9 cm) ASRock 775S61 Quick Installation Guide ASRock 775S61 Support CD (including LGA 775 CPU Installation Live Demo) One 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable One Ribbon Cable for a 3.5-in Floppy Drive One ASRock I/OTM Shield One COM Port Bracket One ASRock MR Card (Optional) 4 1.2 Specifications Platform: CPU: Micro ATX Form Factor: 9.6-in x 9.0-in, 24.4 cm x 22.9 cm 775-Pin Socket supporting Intel® Pentium® 4 / Celeron® processor (in 775-land LGA package) Chipsets: North Bridge: SiS 661FX chipset, FSB @ 800/533MHz, supports Hyper-Threading Technology (see CAUTION 1) South Bridge: SiS 963L chipset, supports USB 2.0, ATA 133 VGA: SiS Real256E, 32MB-64MB VRAM (share memory) Memory: 3 DDR DIMM slots: DDR1, DDR2, and DDR3 PC2100 (DDR266) for 3 DDR DIMM slots, Max. 3GB; PC2700 (DDR333) for 2 DDR DIMM slots, Max. 2GB; PC3200 (DDR400) for 1 DDR DIMM slots, Max. 1GB IDE: IDE1: ATA 133 / Ultra DMA Mode 6; IDE2: ATA 133 / Ultra DMA Mode 6; Supports up to 4 IDE devices Floppy Port: Supports up to 2 floppy disk drives Audio: 6 channels AC'97 Audio LAN: Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN Hardware Monitor: CPU temperature sensing; Chassis temperature sensing; CPU overheat shutdown to protect CPU life (ASRock U-COP) (see CAUTION 2); CPU fan tachometer; Chassis fan tachometer; Voltage monitoring: +12V, +5V, +3.3V, Vcore PCI slots: 3 slots with PCI Specification 2.2, PCI3 slot shared with AMR AGP slot: 1 AGP slot, AGP 3.5 compliant, supports 1.5V, 8X / 4X AGP card (see CAUTION 3) AMR slot: 1 slot, supports ASRock MR card USB 2.0: 6 USB 2.0 ports: includes 4 default USB 2.0 ports on the rear panel, plus one header to support 2 additional USB 2.0 ports (see CAUTION 4) 1 PS/2 keyboard port, 1 PS/2 mouse port; ASRock I/OTM: 1 VGA port; 1 parallel port: ECP/EPP support; 5 BIOS: OS: 1 RJ 45 port; 4 default USB 2.0 ports; Audio Jack: Line Out / Line In / Microphone + Game port AMI legal BIOS; Supports "Plug and Play"; ACPI 1.1 compliance wake up events; CPU frequency stepless control (only for advanced users' reference, see CAUTION 5) Microsoft® Windows® 98SE / ME / 2000 / XP compliant CAUTION! 1. 2. About the setting of "Hyper Threading Technology", please check page 23. While CPU overheat is detected, the system will automatically shutdown. Please check if the CPU fan on the motherboard functions properly before you resume the system. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. 3. 4. Do NOT use a 3.3V AGP card on the AGP slot of 775S61 motherboard! It may cause permanent damage! Power Management for USB 2.0 works fine under Microsoft® Windows® XP SP1/2000 SP4. It may not work properly under Microsoft® Windows® 98/ME. Please refer to Microsoft® official document at http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx 5. Although 775S61 offers stepless control, it is not recommended to perform over clocking. When the CPU frequency of 775S61 is set to perform over clocking, other clocks, such as PCI clock, AGP clock and Memory clock will also be overclocked proportionally. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU and the motherboard. 6 1.3 Motherboard Layout 12 22.9cm (9.0 in) PS2_USB_PWR1 34 5 6 PS/2 Mouse 1 PARALLEL PORT Keyboard PS/2 CPU_FAN1 ATX12V1 DDR DIMM1 (64/72 bit, 184-pin module) DDR DIMM2 (64/72 bit, 184-pin module) VGA LAN USB 2.0 Ports USB 2.0 Ports DDR DIMM3 (64/72 bit, 184-pin module) ATXPWR1 7 8 24.4cm (9.6 in) Prescott 800 DDR400 FSB800 GAME AUDIO1 GAME AUDIO1 Line out Line in In Line SIS 661FX Chipset 2Mb BIOS Super I/O 9 Mic Mic in In ` 25 24 23 22 21 LAN PHY 01 23 45 IDE2 IDE1 1.5V_AGP1 ATA133 PCI 1 CD1 AUX1 AUDIO1 1 PCI 2 SIS 963L CHA_FAN1 1 10 CMOS Battery SPEAKER1 1 775S61 1 USB45 AUDIO CODEC JR1 JL1 PCI 3 AMR1 FLOPPY1 5.1CH USB2.0 IR1 11 PANEL 1 PLED PWRBTN 1 HDLED RST 1 COM1 20 1 2 3 4 5 6 7 8 9 10 11 12 13 19 1817 16 15 14 13 12 14 15 16 17 18 19 20 21 22 23 24 25 Infrared Module Connector (IR1) Serial Port Connector (COM1) USB 2.0 Header (USB45, Blue) AGP Slot (1.5V_AGP1) PCI Slots (PCI1- 3) Floppy Connector (FLOPPY1) AMR Slot (AMR1) JR1 / JL1 Jumpers Front Panel Audio Connector (AUDIO1) Internal Audio Connector: CD1 (Black) Internal Audio Connector: AUX1 (White) Flash Memory PS2_USB_PWR1 Jumper ATX 12V Connector (ATX12V1) 775-Pin CPU Socket North Bridge Controller CPU Fan Connector (CPU_FAN1) 184-pin DDR DIMM Slots (DDR DIMM1- 3) ATX Power Connector (ATXPWR1) Secondary IDE Connector (IDE2, Black) Primary IDE Connector (IDE1, Blue) South Bridge Controller Chassis Fan Connector (CHA_FAN1) System Panel Connector (PANEL1) External Speaker Connector (SPEAKER1) 7 1.4 ASRock I/O TM 1 2 3 4 5 Parallel Port RJ-45 Port Game Port Microphone (Pink) Line In (Light Blue) 6 7 8 9 10 Line Out (Lime) USB 2.0 Ports VGA Port PS/2 Keyboard Port (Purple) PS/2 Mouse Port (Green) 8 Chapter 2 Installation 775S61 is a Micro ATX form factor (9.6" x 9.0", 24.4 x 22.9 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components. 2.1 Screw Holes Place screws into the holes indicated by circles to secure the motherboard to the chassis. Do not over-tighten the screws! Doing so may damage the motherboard. 2.2 Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. 3. Hold components by the edges and do not touch the ICs. 4. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 9 2.3 CPU Installation For the installation of Intel 775-Pin CPU, please follow the steps below. 775-Pin Socket Overview Before you insert the 775-Pin CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Step 1. Open the socket: Step 1-1. Disengaging the lever by depressing down and out on the hook to clear retention tab. Step 1-2. Rotate the load lever to fully open position at approximately 135 degrees. Step 1-3. Rotate the load plate to fully open position at approximately 100 degrees. Step 2. Insert the 775-Pin CPU: Step 2-1. Hold the CPU by the edges where are marked with black lines. black line black line Step 2-2. Orient the CPU with IHS (Integrated Heat Sink) up. Locate Pin1 and the two orientation key notches. Pin1 orientation key notch orientation key notch Pin1 alignment key alignment key 775-Pin Socket 775-Pin CPU 10 For proper inserting, please ensure to match t ...