32 TFT LCD TV INSTRUCTION MANUAL MODEL: LTV-3201 Please read all the safety and operating instructions carefully before you begin. Safety class This is an IEC safety class I product and must be grounded for safety. CONTENTS IMPORTANT SAFETY INSTRUCTION....................................................................................................................... 1-2 PREFACE................................................................................................................................................................... 3 WARNING AND CAUTIONS...................................................................................................................................... 4-6 SPECIFICATIONS...................................................................................................................................................... 7 INSTALLATION TV ASSEMBLY DRAWINGS............................................................................................................................... 8 FRONT....................................................................................................................................................... ....... BACK................................................................................................................................................................. PC...................................................................................................................................................................... ANTENNA.......................................................................................................................................................... AV EQUIPMENT ASSESSORIES................................................................................................................... BATTERY INSTALLATION (REMOTE CONTROL UNIT)......................................................................................... REMOTE CONTROL DESCRIPTION..................................................................................................................... OPERATION INTRODUCTIONS TURN ON/OFF TV........................................................................................................................................... 18 19 20-21 22-23 24 25 26 27 9 10 11 12 13 14 15-17 PICTURE SETTING SOUND......................................................................................................................... CLOSED CAPTION.......................................................................................................................................... SETUP............................................................................................................................................................... CHANNEL SETTING........................................................................................................................................ ANALOG RGB AND DVI PICTURE SETTING PICTURE POSITION.................................................... TROUBLESHOOTING GUIDE................................................................................................................................. PERSONAL COMPUTER....................................................................................................................................... IMPORTANT SAFETY INSTRUCTION 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8.Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including Amplifiers) that produce heat. 9.Do not defeat the safety purpose of the polarized or grounding type plug.A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles, and the point where they exit from the apparatus. 11.Only use attachments/accessories specified by the manufacturer. 12.Unplug this apparatus during lightning storms or when unused for long periods of time. 13.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. important safety instruction. 15.Splashing The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, splashing and no objects filled with liquids such as vases, shall be placed on the apparatus. 16.A warning that an apparatus with class I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 17.where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. -1- IMPORTANT SAFETY INSTRUCTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN! CAUTION TO REDUCE THE RISK OF ELECT RIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. POWER SUPPLY: Connect AC100--240V,50/60Hz,220W output to this unit's power socket. The core of the socket is positive pole. Sheet metal outside is cathode. -2- PREFACE Thank you very much for purchasing this TV. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference. INSTALLATION Locate the TV in the room where light does not strike the screen directly. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the TV and the wall to permit ventilation. Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure. This AC power can be connected to AC 100-240 volts. 50/60Hz. Do not cover the ventilation openings when using the TV. CAUTION Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD PANEL or CABINET the , power cord should be pulled out from the receptacle, then wipe the receiver with dried soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by the TV service personnel. -3- WARNINGS AND CAUTIONS Caution Carry the set requires two or more people. Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Caution Do not insert anything in the ventilation holes. If metal or something flammable enters, it may result in fire or electric shock. Caution Do not place objects on this unit, it may damage the screen surface. Caution Do not squash power supply cord under the television receiver. Caution Do not throw anything at the set. The screen glass may explode by impact and cause serious injury. -4- WARNINGS AND CAUTIONS Caution Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall. Caution Do not place your television on an unstable cart , stand , shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall. Caution When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet . Caution Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical component. Warning Avoid exposing the television receiver to direct sunlight and other source of the heat. Do not stand the television receiver directly on other produces which give off heat .E.g.video cassette players. Audio amplifiers. Do not place naked flame sources, such as lighted candle on the television. Do not expose the LCD screen surface to the sun, it may damage the screen surface. -5- WARNINGS AND CAUTIONS Warning Take care not to connect many appliances to the same mains socket as this could result in fire or elecric shock. Do not place objects on this unit. it may damage the screen surface. Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set.Refer servicing to qualified service personnel. Warning To prevent fire or electrical shock hazard, Do not expose the television receiver to rain or moisture. Warning For you own safety, Do not touch any part of the set, main lead or aerial lead during lighting storms. Caution If the television is to be built into a Compartment or similarly enclosed, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous. Dim:515*320mm( -6- SPECIFICATONS Model LCD panel Television system LTV-3201 32 INCHES TFT LCD NTSCM PAL-4.43MHz-50Hz NTSC-3.58MHz-60Hz AV system SECAM-4.29MHz-50Hz NTSC-4.43MHz-60Hz PAL-3.58MHz-50Hz PAL-3.58MHz-60Hz PAL-4.43MHz-60Hz Channel coverage VHF-L: 46.25~163.25MHz VHF-H: 158.25~466.25MHz UHF: 461.25~865.25MHz Analog RGB mode 640X480/ 60Hz, 800X600/ 60Hz, 1024X768/ 60Hz,1280X768/60Hz Y Pb/Cb Pr/Cr mode 480P,576P,720P,1080i Resolution 1366X768 Display Color 16.7 million colors Comb Filter Adaptive 2/4 line Contrast 800:1 Brightness 500cd/m2 Viewing angle 170° (H)/170° (V) OSD language English/French/Italian/Spanish/German/Portuguese Power source AC 100-240V , 50/60Hz Power consumption 220W Audio power 6W+6W Lamp life 50,000 hours RF input: Cable/ antenna RFx1 VIDEO input: VIDEOx2 Video/Audio S-VIDEOx1 terminals Y Pb/Cb Pr/Cr x1 GRAPHIC input: Analog RGB 15pin x1 DVIx1 AUDIO input: AV audio x2 HDTV audiox1 AUDIO output: Tv1 audiox1 Supplied accessories Remote control, AC cord, Instruction Manual,Batteries. Design and specifications are subject to change without notice. Accessories: One Remote Control Two size AAA batteries One AC cord -7- TV ASSEMBLY DRAWINGS Hang the TV on the wall Step1: Disassemble the pedestal. Step2: Install part A on the wall. Step3: Hang the TV on the wall. Note: 1.Installation of the display unit on the wall should be carried out by qualified servicemen. Improper installation may render the unit unsafe in the event of an earthquake.etc. 2.Hang the TV on the wall requires two or more people. 3.The unit must be installed concrete wall. Refer to drawings below: A Wall A -8- INSTALLATION FRONT IR KEYS: 1.CH+: channel up select, it is equivalent . 2.CH-: channel down select, it is equivalent . 3.VOL+: volume up adjust, it is equivalent . 4.VOL-: volume down adjust, it is equivalent . 5.MENU: to enter into menu operation. 6.AUTO/EXIT: automatically adjust picture/exit OSD. 7.POWER/ SIGNAL SELECT: press the key at least 5 seconds to turn off the set (standby). Press the button once is 3 seconds to select a signal source. 8.(Power on/standby)indicator:Lights up in green when the set is working.when the standby mode, the indicator lights up flash. -9- INSTALLATION BACK Power Input Software upgrade SCALE 1.000 Stop output after standby for 3 minutes VIDEO output is fixed TV signal AUDIO output is fixed MONO signal VIDEO output and Audio output Power switch VIDEO input and Audio input HDTV Audio Input YC Input Analog RGB Input DVI Input S-VIDEO Input Av2 Input CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN C LISTED US Audio/Video Apparatus E 58WJ 221338 -10- INSTALLATION PC STEPS: 1. a. b. 2. 3. 4. Connect Video Cable Make sure both the TV and computer are powered-OFF. Connect the video cable to the computer. Connect the Audio cable. Connect power cord Power-ON Computer Power-ON the TV first, then Power-ON the computer. This sequence is very important. 5. If the TV still does not function properly, please refer to the troubleshooting section to diagnose the problem. * Please don't open the Cover Connector lug SCALE 1.000 HDTV Audio Input YC Input Analog RGB Input DVI Input S-VIDEO Input Av2 Input CAUTION: Hold on to the connector lug when you unplug any one of the connectors, Do not pull direct pull on the cord as it is prone to damage. -11- INSTALLATION ANTENNA -12- INSTRUCTION AV EQUIPMENT This TV provides 2 group of AV input terminal including one S-Video and one group of YCbCr terminal for connection to VCR,DVD or other video equipment. To enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well. You can use the AV input terminals on TV set rear as follows. Y Yellow (video) W White(audol L,mono input) R Red(audio R) W VIDEO EQUIPMENT R Y with terminal To audio inputs To video inputs W R Y with S-video terminal W R Y VIDEO EQUIPMENT W with terminal VIDEO EQUIPMENT R W R Y R Y To S-VIDEO output B VIDEO EQUIPMENT To audio outputs G B R G B R G W R Y You can also the S-VIDEO terminal if your video equipment has S-VIDEO. It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc..... If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to component video input on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals. *Please keep AC cord unplugged when connecting TV system. -13- BATTERY INSTALLATION (REMOTE CONTROL) Insert Batteries Into the Remote Control 1. Remove the battery cover. 2. Insert the 2 AAA 1.5V batteries,ensurecorrect polarity (+ or -) 3. Replace the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady, erratic or when TV set shows no response to the remote control. Remark: 1. Alkaline battery recommended 2. Remove batteries when they are exhausted or if the remote control has not been used for a long time. 3. Do not mix new and old batteries of different types/brands. -14- REMOTE CONTROL DESCRIPTION 1 10 2 6 3 5 20 18 19 13 14 9 12 4 11 8 17 7 16 15 1.POWER (STAND BY) BUTTON ( ) Press this button to turn on or turn off (Standby mode).Press Power Button, picture and sound will appear on within a few seconds. 2.PROGRAM SELECTION BUTTON (0-9 BUTTONS) Push the number for your desired program and the program indicator will be displayed on the screen. 1.To input a one-digit number(0-9):press button to display"-",then press 0-9 digit button. 2.To input a two-digit number(10-99):press button to display "--",then press two digit button in order to input the channel number.For example, you need channel 25, please input "2" button followed "5" button. 3.To input a three-digit number(100-135):press button to display "---", then press three digit button in order to input the channel number. 3.VOL+/- BUTTONS (VOL+/-)(TV top control key) Press VOL+/- buttons to adjust sound level. -15- REMOTE CONTROL DESCRIPTION 4.CH+/- BUTTON(TV top control key) 1.Press the CH+/- button to select the program forwards. 2.Press the CH+/- button to select the program backwards. (Use these two buttons for Page Up/Down to increase/decrease page number in TELETEXT mode,option) 5.MENU BUTTON(TV top control key) Use "MENU" button for the tuning procedure, please refer to page18-25 for the details. 6.SLEEP BUTTON This key is used to set the sleep timer from 10 minutes to 240 minutes. Time will display on bottom-right corner and decrease in second when one minute left. Monitor will go into stand by mode when time off. To switch off this function, Press this key step by step until "off" display. 7.DISPLAY BUTTON Press this button to recall program number, system etc on the screen. 8.RECALL BUTTON Press this button to return to the previously viewed program. 9.SOURCE SELECT BUTTON ( ) (TV top control key) Press this button to display external video signal such as VCR or DVD player. *Remark: PC DVI TV AV1 AV2 S-VIDEO YCbCr HDTV 10.MUTE BUTTON ( ) Press once to mute the sound, press again to return to previous sound level. 11.MONO/STEREO BUTTON ( ) (OPTION) As stereo program is received. You can select STEREO/MONO/Dual A/Dual B or MONO/STEREO/SAP or FM/A2/Germem stereo/BTSC/Nicam by pressing the button. 12.PIP BUTTON This button has no function. 13.SOUND BUTTON Press this button is to select the sound mode:Personal/Cinema/Music/Speech. 14.PICTURE BUTTON Press this button to select the user picture mode:Personal/Bright/Mild/Standard. 15.Auto BUTTON Press this button to automatically adjust picture. 16.Screen BUTTON Press this button to select the screen format:Fill Screen/4:3/Wide /Cinema/Smart/14:9.(Video Format) 17.CCD BUTTON Press this button to setup CCD. -16- REMOTE CONTROL DESCRIPTION 18.V-Chip BUTTON Press this button to setup V-Chip. 19.FREEZE BUTTON Press this button to hold the current video picture, Press the button twice to cancel. TV 13:15 Signal Current time TV 13:15 CH 9 I TV channel and soundformat CH 9 I 20.SYSTEM BUTTON Press this button to select TV/IRC/HRC/STD format at NTSC TV signal. -17- OPERATION INSTRUCTIONS TURN ON/OFF 1. Insert the AC plug into a conveniently located AC outlet (100-240VAC,50/60Hz). 2. Turn on the on/off switch 3. Press the to select the signals *Remark: PC DVI TV AV1 AV2 S-VIDEO YCbCr HDTV If no input signal, then a blue background appears. 4. Press menu and the menu will display, continue press menu to select follow the menu, press select the language menu, press or select the language. or to Note: The item of selected is highlight when press or . SETUP SETUP Language OSD Position OSD Background Screen Format Timer Setting Freeze Window Gamma Correct Reset to Factory Sync VCR OFF or key to change English Upper Left Opaque Fill Screen OFF Middle or key to change TV The tuner must be correctly installed before switching on AC power. Otherwise the set has no TV source, To enter the channel setting menu 1. Press menu to select the follow menu. Press or to select Color sys, press or to set local system. CHANNEL SETTING Color System TV/CATV Current Program Add/Erase AFT Auto Search Fine Tune or key to change Auto AIR 12 Erase ON 2 It has two way for Channel search: A.Select the format in TV/CATV ,then input the number of the channel directly. B.Select Auto search and press or . -18- OPERATION INSTRUCTIONS PICTURE SETTING The PICTURE SETTING menu allows you to alter the picture adjustments. Press or to highlight the item you want to alter.Press or to select the item you want to alter ,then press or to adjust it. Film Mode---If the signal source is film mode, please select ON, the menu will be best displayed.If the signal source is not film mode, please select OFF. Backlight ---press or to set up the Brightness of the Backlight. DCTI---Digital color transient improvement logic improves the color transitions and redues color smeaning introduced.you can select ON/OFF to enjoy video. Note: Tint can be adjusted only for NTSC color signal. PICTURE SETTING Brightness Contrast Color Tint Sharpness Backlight Color Temp Film Mode DCTI 50 50 50 50 20 20 9300K ON ON Item Brightness Contrast Color Tint Sharpness Darker Weaker Paler Purplish Softer Lighter Stronger Deeper Greenish Sharper or key to change SOUND The SOUND menu allows you to alter the sound adjustments. Press or to highlight the item you want to alter. 1.Press or to select the item you want to alter, then press or to adjust it. 2.Sound mode: Press or to select you like sound mode, Personal,Cinema,Music,Speech. 3 .Special effect --- press or to select you like sound mode. PSE --- pseudo stereo effect SBE --- stereo base width enlargement OFF --- No special effect. 4. Auto Volume --- press or to select on or off volume level of the channels will stay the same, independent of the broadcast signal."on" is unlocked the function, "off" is selected automatically. 5.Equalizer --- press or to select off or natural or dynamic. 6.For a stereo broadcast, the TV set is auto identify, the menu wil display. If you want to select the Mono/Stereo/A/B, press / . Sound Bass Treble Balance Volume Audio Mode Spacial Effect Auto Volume Equalizer 20 20 20 20 Personal OFF OFF OFF Item Bass Treble Blance Volume lower-frequency weaker higher-frequency weaker emphasise the left speaker Littler lower-frequency lighter higher-frequency stronger emphasise the right speaker Bigger or key to change -19- OPERATION INSTRUCTIONS SAP Stereo CLOSED CAPTION Closed caption is an information service transmitted by most TV stations. Press or to highlight the item you want to alter. 1. The CC Mode contain CC1/CC2/Text1/ Text2/XDS/CC3/CC4/ Text3/ Text4 ,press or to select the item you wish to watch. A.Some TV programs may not be broadcast with closed caption signals, and therefore , the TV will not be able to display captions. Also, text information is not offered by all stations. B. Some TV programs only provide one channel caption, one channel text, or only caption without text. 2. The CC Background has black and transparent, press or to select. V-CHIP & CC Enter V-Chip Password.... On/Off Vchip TV Parental Guidelines... MPAA Rating... Canadian English Rating... Canadian French Rating... Change V-Chip Password... CC Mode OFF OFF On/Off Vchip TV Parental Guidelines... MPAA Rating... Canadian English Rating... Canadian French Rating... Change V-Chip Password... OFF or key to set V-CHIP PASSWORD The original code is 0000,If you want to clear the code,please press the key VOL+ and Vol- on the panel at the same time.The password of TV V-Chip Set up... or Movie V-Chip Set up...may be changed at any time,press digital button to input the number of pass word. Enter Password * * - - Press to Exit -20- OPERATON INSTRUCTIONS CAUTION MESSAGES: TV RATING AND MOVIE RATING MOVIE RATING TV RATING Rating TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Allow FV D L S V Rating MPAA G MPAA PG MPAA PG-13 MPAA R MPAA NC-17 MPAA X Allow 1.Press or to select the item you want to alter,then press . 2.if you want alter the TV V-Chip Set up... or Movie V-Chip Set up...,you must press and input the password, press or to select the bit of password, press or to input the number of password,then press to select Ok or Cancel,press menu confirm your input. 3.The password is OK, you may alter TV V-Chip Set up... or Movie V-Chip Set up... Press or to select the rating, press or to select the lock. Parents can select the rate for your children. TV-Y --- This program is designed to be appropriate for all children. TV-Y7 --- This program is designed for children age 7 and above. TV-G --- Most parents would find this program suitable for all ages. TV-PG --- This program contains material that parents may find unsuitable for younger children. TV-14 --- This program contains some material that many parents would find unsuitable for children under 14 years of page. TV-MA --- This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17. FV --- Fantasy Violence V --- Violence S --- Sexual Situations L --- Adult Language D --- Sexually Suggestive Dialog A --- Allow B --- Blocked G --- General audience PG --- Parental guidance suggested PG-13 --- 13 years and up R --- Restricted NC-17 --- 18 years and up The picture will be screened when the input signal contains V-chip information, if you setup the rate. -21- OPERATION INSTRUCTIONS Canadia English Lanugage Ratings: E:Exempt. C:Children. C8+:Children 8 years and older. G:General programming,suitable for all audiences. PG:Perenal guidance. 18+:Adult programming. Canadian French Lanuage Ratings: E:Exempt G:Children 8ans+: Children 8 years and older 13ans+:Children 13 years and older 16ans+:Viewers 16 years and older 18ans+:Adult programming CANADIAN ENGLIAH RATING Rating E C C8+ G PG 14+ 18+ 16 ans+ 18 ans+ Allow CANADIAN FRENCH RATING Rating E G 8 ans+ 13 ans+ Allow SETUP The 1. 2. 3. 4. setup menu allows you to setup other function. Press or to highlight the item you want to alter. Language --- press or to select language OSD Position --- press or to select the display position of OSD. OSD Background --- press or to setup Opaque or translucent. Screen Format --- press or to select the mode of picture displayed. Fill screen --- the each format signal is displayed fill screen. 4:3 --- Conventional 4:3 picture size, full picture information. Wide --- For 16:9 broadcast. 14:9 --- For 14:9 broadcast. Cinema --- Wide screen format for letterbox movies. Smart --- Imitation of wide screen effect for 4:3 broadcast. If parts of the top and bottom of the screen are cut off, press or to adjust the position of the image on the screen. SETUP Language OSD Position OSD Background Screen Format Timer Setting Freeze Window Gamma Correct Reset to Factory Sync VCR OFF OFF Middle English Upper Left Opaque Fill Screen or key to change -22- OPERATION INSTRUCTIONS Smart Fill screen Cinema Wide 14:9 4:3 5. Sleep Setting --- press to enter the menu ,it is equivalent to the Sleep button. Current Clock --- press or to select the item you want to alter, press or to input the number. Turn Off Time --- press or to select the turn off time Turn On Channel --- press or to select the channel of the set auto turn on . Turn On Clock --- press or to select the function is on or off.press to setup the time of set auto turn on you want. Program 1/2/3 --- when you watch TV , you can setup the time and channel which you want to enjoy. You can setup ONCE or EVERYDAY. It is automatic . Current Clock Turn Off Time Turn On Channel Turn On Clock Program Program Program 1 2 3 12:20 12:30 12:30 12:30 1 1 1 13:11 1 123 OFF OFF OFF OFF or key to set 6. 7. 8. Freeze Window ---press or to select on/off."ON":the picture is frozen. Reset to Factory---press to resume the originally setting. Press or to select ON/OFF. ON : The effect of picture is fine at VCR signal. -23- OPERATION INSTRUCTIONS CHANNEL SETTING 1. Press menu to select the follow menu. Press or to select Color sys, press or to set local system. CHANNEL SETTING Color System TV/CATV Current Program Add/Erase AFT Auto Search Fine Tune or key to change Auto AIR 12 Erase ON 2.TV/CATV--- press or to select the format(AIR,STD.IRC.HRC) of NTSC signal.STD/IRC/HRC is identified automatically at CATV. 3.Current program---press or to switch the channel. 4.Add/Erase --- press or to select add or erase the current channel. you can select the channel by the Current prog menu by the number buttons if you want to switch to the skipped channel, then switch the add. 5.AFT ---Auto frequency control. 6.Auto Search --- Press or broadcast channels for you. 7.Fine Tune --- press or to select Auto search, press or to begin searching and storing all available to enter the menu, then press or continue to tune the effect of picture. 1 Fine Tuning VHFH or key to Change Note: Press menu will end the auto search during searching, but automatic tuning will not be completed. -24- OPERATION INSTRUCTIONS ANALOG RGB AND DVI Following modes are strongly suggested for set up mode. RESOLUTION V.Freq.(Hz) 640x480 800x600 1024x768 1280x768 59.940 60.317 60.004 59.870 H.Freq.(KHz) 31.469 37.879 48.363 47.776 GRAPHIC MODE VGA VGA VGA VGA PICTURE SETTING Press or to select the item you want to alter, then press or to adjust it. PICTURE SETTING Brightness Contrast Phase Frequency USER_R USER_G USER_B Color Temp 20 20 20 1312 20 20 20 9300K Item Brightness Contrast Phase Frequency USER_R USER_G USER_B Darker Weaker Decrease Left Weaker Weaker Weaker Lighter Stronger Increase Right Stronger Stronger Stronger or key to change Color Temp --- press or to select the color temperature. NB: The DVI input only fit with VIDEO player. PICTURE POSITION 1. 2. 3. 4. Horizontal --- Press the to move the Screen to the left. Press the to move the Screen to the right. Vertical --- Press the to move the Screen to up. Press the to move the Screen to down. Auto Adjust --- Press the , the picture will be adjusted at best setting. Backlight ---press or to set up the Brightness of the Backlight. PICTURE POSITION Horizontal Vertical AutoAdjust Backlight 50 50 50 or key to change Note: If the picture is abnormal at any signal, please press VCR/AUTO The SETUP and Sound operation with reference to the TV. -25- TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE SYMPTOM No power POSSIBLE CAUSE The AC power cord is not connected The switch is switch off TV station experiencing problems Picture setting is not adjusted Possible local interference Double images or ghosting Only snow and noise appears on the Screen No color on color programme Some tiny black points or bright points on the screen Noisy picture when viewing a TV channel Good picture, no sound TV station experiencing problems Possible local interference Good picture ,noisy sound Sleep timer is set Off timer is set POSSIBLE SOLUTION Connect the AC power corcd to the AC outlet Switch on the switch Try another channel Check picture control adustments Check for source of reception Check aerialcable connections Check if the aerial is broken or bent Press VCR/AUTO The picture of a display units is composed of pixels. It is not indicate a malfunction Using the menu system, select the Channel setting to adjust Fine Tune to ob tain better picture reception Press the + - or (mute) Try another channel Check for source of reception disturbance Check the sound sys Set sleep timer to off Clear off timer Poor/no picture Poor/no sound TV shuts off -26- TROUBLESHOOTING GUIDE PERSONAL COMPUTER The computer is in power saving mode.Try Pressing any The NO INPUT SIGNAL message appears on the screen key on the computer key board. Check the computer power is on . Check the cable is properly connected. No picture If the OUT OF SCANRANGE message appears on the screen Check the video frequency range is within that specified for the monitor ,adjust the frequency range to the following: Horizontal:15.6-90KHz Vertical:48-85 Resolution:£1366x768 Using the menu system, adjust Brightness Pictureis fuzzy and Contrast . Press VCR/AUTO If the set don't turn on when you turn o AC Power, please turn off AC power an wait a moment, then turn on n d AC power. If the picture is wrong at any signal, press VCR/AUTO, the picture will be dis played had best. If you feel the pictures is glaring,please adjust the lightness of backlight. Note: If you continue to experience problems,have your TV serviced by qualified personnel.Never open the casing yourself. -27-