User manual ASTAR PD-3020

PD-3020 User Manual Please read this User Manual carefully to ensure proper use of this product and keep this manual for further reference. Content Introduction Safety Precautions Important Safety Instructions Panel Illustration Remote Control 2 3 5 6 Connections Connecting to a TV set 7 Connecting to an AV Receiver with Digital Audio Input 8 Basic Playback Basic Operation 9 Advanced Features Modes and Features Setup Remote Control Operation MP3 Playback KODAK Picture CD playback 10 15 24 25 Others Troubleshooting Specifications Macrovision function instruction 26 27 27 -1- Safety Precautions CAUTION: Introduction Specifications Other CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THE UNIT EMPLOYS A LASER SYSTEM. TO ENSURE THE PROPER USE OF THE UNIT, READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE. IF THE UNIT REQUIRES SERVICING, CONTACT THE SELLER OR SEE "TROUBLESHOOTING". Type Model Play mode Disc mode Video characteristic PD-3020 NTSC/PAL DVD, CD, MP3, CD-R, CD-RW, JPEG, DVD-R/W THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE UNIT'S CABINET THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. TO PREVENT DIRECT EXPOSURE TO THE LASER RADIATION, DO NOT OPEN THE CABINET. VISIBLE LASER MAY RADIATE WHEN THE CABINET IS OPENED OR THE INTERLOCKS ARE DEFEATED. DO NOT STARE INTO THE LASER BEAMS. Video S/N ratio Resolution Audio characteristic Frequency response 65dB. 500 lines. fs 96KHz: 20Hz-20KHz:+/-1dBI 90dB 90dB < 0.01% 96KHz/24bit THE EXCLAMATION POINT WITHIN AN E Q U I L AT E R A L T R I A N G L E I S INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE MANUAL ACCOMPANYING THE UNIT. CAUTION: THE DVD VIDEO PLAYER IS A CLASS 1 LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. AS THE LASER BEAM USED IN THIS DVD VIDEO PLAYER IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY . Audio S/N ratio Dynamic range Distortion D/A Converter Output characteristic Video output Audio output Power Voltage Power consumption Size Weight WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. NEVER ATTEMPT TO OPEN THE CABINET, DANGEROUS HIGH VOLTAGES ARE PRESENTED IN THE UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1Vp-p(75 W) COAXIAL, 2CH DC IN 12V 10W 205x158x40mm 0.7kg WARNING: FCC REGULATIONS STATE THAT ANY CHANGE OR MODIFICATION TO THE EQUIPMENT, NOT EXPRESSLY APPROVED BY MAKER OR ITS AUTHORIZED PARTIES, COULD VOID USER'S AUTHORITY TO OPERATE THIS EQUIPMENT. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE- BLADE PLUG WITH WIDE SLOT AND FULLY INSERT. THE APPARATUS SHALL NOT BE EXPOSED TO WATER AND NO OBJECTS FILLED WITH LIQUID SUCH AS VASES SHALL BE PLACED ON THE APPARATUS. Specifications are subject to change without notice. Accessories: 1. Remote controller 1 pcs 2. Audio/Video cable 4. Adapter 1 pcs (check that all accessories are included ) 1 pcs 3. User,s manual 1 pcs -2- -27- Troubleshooting If you have any questions, please consult the troubleshooting guide below. Other Important Safety Instructions 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions All operating instructions should be followed. 5. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Water and Moisture Do not use this product near water for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. 8. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 9. Portable Cart Warning A product and cart combination should be moved with care. Quick stop, excessive force, and uneven surface may cause the product and cart combination to overturn. Introduction 10. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11. Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power or other sources, refer to the operating instructions. 12. Grounding or Polarization This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 13. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. NO PICTURE OR SOUND "BAD DISC" DISPLAYED Ensure the power button is on. Ensure the power outlet is operational. Ensure the power cord is not damaged. Ensure the power plug is connected firmly to the outlet. Ensure the disc is not warped, damaged or deformed. Ensure the disc is not badly stained or damaged. Ensure the disc format is compatible with the player. Please check whether you have tried to play a software CD. If so, please restart the player. PICTURE BUT NO SOUND REMOTE NOT WORKING Ensure the audio jacks are securely connected. Ensure the audio connector is not damaged. Ensure the volume is turned up in VOL/CH setup. Ensure you have set the player's AUDIO settings correctly. Ensure you have ENTERed the correct AV input for your TV. Ensure the audio is not set to mute. Ensure the remote batteries are working. Point the remote control directly at the player's IR sensor. Remove any obstacles between the remote and the IR sensor. SOUND BUT NO PICTURE UNIT NOT WORKING Ensure the video jacks are securely connected. Ensure you have ENTERed the correct AV input for your TV. Ensure the video connector is not damaged. Ensure you have set the player's VIDEO settings correctly. Turn off the power, and then turn it on again. "NO DISC" DISPLAYED Ensure you have put the disc on the tray. POOR PICTURE OR SOUND Ensure the disc is not upside down. Ensure the disc is not distorted, stained or scratched. Ensure you have set the player's AUDIO settings correctly. Ensure the disc is not scratched or stained. Ensure the AV connector or the output terminal is not damaged. (Symbol provided by RETAC) -26- -3- Important Safety Instructions 14. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure below. Introduction 19. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A)When the power-supply cord or plug is damaged, B)If liquid has been spilled, or objects have fallen into the product, C)If the product has been exposed to rain or water, D)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, E)If the product has been dropped or damaged in any way. F)When the product exhibits a distinct change in performance this indicates a need for service. 21. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 22. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 23. Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 24. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Kodak Picture CD Playback Advanced Features The introduction of KODAK Picture CD A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by checking the box on the photo finishing envelope when you drop off a roll of film (35 mm or Advanced Photo System (APS) color print film) at the time of processing in Kodak Express store displaying "Kodak Picture CD" sign. When your order is returned, you receive your prints, negatives, and your full roll of pictures safely stored on your KODAK Picture CD. Each KODAK Picture CD brings you the tools to enhance, share and manage your pictures on your computer. You also can record the JPEG picture into CD-R or CD-RW with the CD-Rewriter yourself. Note: 1. The Max. Size of JPEG Picture can be supported: 3840X3840 pels 2. JPEG stands for Joint Picture Experts Group. It is the first International Standard on Still Picture Compressing: ISO 10918-1, constituted by the Committee on Still Picture Compressing Standard of ISO. The pictures on KODAK Picture CD are stored in this format (JPEG). This player can decode the JPEG pictures in KODAK Picture CD and playback the pictures in different modes. Now, you can playback Kodak Picture CDs on this player and view your wonderful pictures on your TV in the comfort of your living room. When a Kodak Picture CD is inserted on a player an automatic slide show is launched. Each picture in the Kodak Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen. General function: You can set slide show transition modes for any pictures. Press PAUSE to stop playing. Press or to see the previous or next picture. Press PLAY to continue slideshow transitions. Press STOP to return to root menu. 15. Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power lines surges. 16. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock. Image Rotation There are three modes to rotate a picture: original, 90 Deg, and 180 Deg. These operations are allowed only when a picture is being displayed normally and will be cancelled automatically when a new picture is displayed. The ANGLE keys are used to select the different rotation modes: Press ANGLE Press ANGLE again Press ANGLE again OSD display OSD display OSD display original. 90 Deg. 180 Deg. Zoom Function: 18. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. This player provides both Zoom in/out and Zoom pan function. Press the ZOOM consecutively, the picture will zoom in/out in turn as followings: Q4/3 Qoff Q3/2 Q1/2 Q2 Q1/4 Note: During the ZOOM function, slideshow transitions and image rotation are disabled. Q off: close zoom, press PLAY again to resume slideshow transition mode. -4- -25- MP3 Playback Advanced Features Panel Illustration Introduction Supported formats Disc format: ISO 9660, Joliet Music file format: MP3 MP3 bit rate (data rate): 32 -192 kbps Total number of music files and albums: around 350 per disc. Sampling rate: (CBR)32kHz/44. 1kHz/48kHz/64kHz; (VBR) 16kHz/22kHz/24kHz/32kHz (MPEG ) Note: The player will not identify or play MP3 discs under the following conditions: recording format is not supported, badly scratched or deformed disc, MP3 recorded in CD-R or CD-RW which is not finalized, or a dirty pickup. When a MP3 disc is loaded, the screen will display as follows: 1 1 2 3 4 5 6 7 8 9 10 11 LCD DISPLAY SPEAKER RIGHT SPEAKER LEFT DISC TOP OPEN DISC TOP OPEN LCD DISPLAY SENSOR MENU BUTTON 16:9/4:3 SELECT BUTTON FUNCTION BUTTON SETUP BUTTON LEFT/REV BUTTON UP BUTTON RIGHT/FWD BUTTON ENTER BUTTON Total tracks 12 MP3 CDA Directory 056/140 0:00:01 Elapsed time of the current track Current track 2 13 14 15 3 1 2 3 4 5 6 A01 A02 A03 A04 A05 A06 7 8 9 A07 A08 A09 File name POWER ON OFF 21 22 File window DIGITAL AUDIO E D DIGITAL VIDEO VIDEO FUNCTION SETUP 10 11 INPUT 9 OUTPUT MENU 16:9 / 4:3 8 23 24 25 26 27 28 12 13 14 15 16 COAXIAL VOLUME Press to select the file when the cursor appears in the file window. Press ENTER to play the current file selected by the cursor. Press to switch between the directory window and the file window. Note: During MP3 playback, Forward Scan and Reverse Scan are not available. 5 17 18 19 20 6 7 16 17 18 19 20 21 22 23 DOWN BUTTON PREV BUTTON NEXT BUTTON STOP BUTTON PLAY/PAUSE BUTTON POWER DC 12V INPUT JACK INPUT/OUTPUT SELECT 24 25 26 27 28 VIDEO JACK AUDIO JACK COAXIAL OUTPUT JACK EARPHONE JACK VOLUME KNOB -24- -5- AUDIO File: A01 4 TM DC IN 12V PO RT AB L VD /C D/M P3 YER PLA Remote Control Introduction Remote Control Operation 16:9/4:3 Advanced Features 1 1 2 MUTE PROG DISPLAY TFT ON/OFF PROGRAM MUTE NTSC/PAL SUBTITLE LANGUAGE ANGLE UP ENTER LEFT DOWN TITLE MENU/PBC L/R CHANNEL Resume FORWARD REV STOP 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 PLAY/PAUSE DISPLAY TFT POWER ON/OFF NUMBER KEY SELECT TIME SETUP RIGHT STEP FUNCTION REPEAT A-B REPEAT ZOOM SLOW PREV NEXT VOLUME VOLUME + 19 20 2 3 Switch the display mode of 16:9 or 4:3 format. 3 4 5 N/P 1 4 7 0 2 5 8 10+ 3 6 21 4 5 6 7 SUBTITLE LANGUAGE 9 TIME 6 7 8 9 10 11 12 13 14 15 16 17 18 ANGLE 22 23 24 8 9 10 11 12 13 14 15 16 17 SETUP ENTER STEP 25 26 27 28 29 FUNCTION TFT ON/OFF MENU/PBC TITLE REPEAT A-B Resume L/R ZOOM SLOW 30 31 32 33 34 Press TFT ON/OFF key to TFT-LCD display press it again to TFT-LCD turn off. VOL- VOL+ L/R Using the Remote Control Point the remote control at the remote sensor in order for the player to function correctly. The remote will function to approximately 21' from the remote sensor at an angle of approximately 30 each direction. Note: Directing the remote sensor toward any light source, such as direct sunlight, may cause the unit to malfunction. Do not spill water or put wet items on the remote control. Never disassemble remote control. When a DVD is played, the active dubbing language will be shown. When a SVCD or VCD is played the left track, right track or stereo will be displayed accordingly. When a bilingual story VCD is played, you may press the button to select the language desired. CR2025 HOW TO REPLACE THE BATTERY STEP 1: PUSH THE BUTTON TOWARD LEFT; STEP 2: PULL THE BATTERY LOADER OUT. 1 2 BATTERIES INCORRECT USE OF BATTERIES MAY CAUSE THEM TO LEAK, CORRODE OR EXPLODE. Be sure to place the batteries in the correct direction. It is dangerous to charge/heat/open or short-circuit the batteries. Do not leave dead or expired batteries or mix old/new batteries. When not using the remote control for a long duration of time, remove the batteries. When operating range becomes reduced, replace all batteries with new, fresh ones. If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then replace. -6- -23- Remote Control Operation ZOOM Advanced Features Connecting to a TV Set Connections During DVD playback, press ZOOM to magnify the image as follows: Q1 Q2 Q Off Q3 POWER ON OFF COAXIAL AUDIO VIDEO ANGLE During DVD playback Press ANGLE to view scenes from different camera angles. Press ANGLE repeatedly to change from one camera angle to another. Note: This function is disc specific. INPUT OUTPUT DC IN 12V RED WHITE Yellew VIDEO IN AUDIO IN VOLUME LANGUAGE During DVD playback Press LANGUAGE repeatedly to select from up to 8 audio languages/formats. Note: This function is disc specific. SUBTITLE During DVD playback Press SUBTITLE repeatedly to select from up to 32 subtitle languages. Note: This function is disc specific (languages will vary). -22- -7- Connecting to an AV Amplifier with Digital Audio Input Connections Remote Control Operation Advanced Features STEP Press STEP during playback to pause playback. POWER ON OFF Press STEP repeatedly to play frame. Press play to resume normal playback. INPUT OUTPUT DC IN 12V REPEAT VIDEO Coaxial cable Select to press REPEAT to select Repeat Title, Repeat chapter, Repeat off During DVD playback. Press REPEAT to select Repeat Single, Repeat All and Repeat off ( CD or Others). COAXIAL AUDIO VOLUME Coaxial VOL+ VOL- Amplifier VOLUME INPUT SELECTOR POWER BYPASS PRO LOGIC 3 STEREO MODE TEST CHANNEL KARAOKE MUTE DOWN UP BASS MIC TREBLE ECHO 1 MIC 2 1 MIC VOL 2 EXCITE Press Volume button to increase Volume Press button to reduce volume till to no volume output. Notes: 1. Select the Coaxial digital audio output. 2. Set the player's audio out to Raw or PCM mode . 3. Set the Amplifier to the AV input connected to the DVD player. MUTE Press MUTE to mute the Audio output Press MUTE again to resume normal audio output -8- -21- Remote Control Operation PROG Advanced Features Basic Operation Preparation before playing: Basic Playback While [PROGRAM] is on, press ENTER to display the [Program] submenu: CD Others Program Input 1 __ 2__ 3__ 4__ 5__ 6__ 7__ 8__ 9__ Clear All 10 _ _ 11 _ _ 12 _ _ Input the track numbers in the order you would like them to play. When finished, select [Play Program] and then press ENTER to play the tracks in the new programmed order. Select [Clear All] and press ENTER to clear all the numbers you have input. Play Program DVD Input the title number and the chapter number in the desired Program Input Title / chapter order. Then sele ct [Play Program] and press ENTER to play the chapters in the order you have set. Select [Clear All] and press ENTER to clear all the numbers you have input. 1 _ _:_ _ 4 _ _:_ _ 7 _ _:_ _ 10 _ _:_ _ 2 _ _:_ _ 5 _ _:_ _ 8 _ _:_ _ 11 _ _:_ _ 3 _ _:_ _ 6 _ _:_ _ 9 _ _:_ _ 12 _ _:_ _ Play Program Clear All STEP 1 - Press POWER to start the player. The DVD logo appears on the TV screen. Function Push the Function button once, the following menu show in the display screen: Sharpness, TINT, Color, Contrast, Brightness, Rest and push the Function again select the Parameter you wanted. Press the UP button or DOWN button adjust the parameter till available. STEP 2 - Push OPEN either on the front panel or remote control. When the tray is opened, place the disc on the tray with the label side up. Push OPEN again to close the disc tray. STEP 3 - Press the PLAY button on the front panel or remote control. The player will automatically read and identify the disc, and begin playback. -20- -9- Modes and Features Setup SETUP Advanced Features Remote Control Operation Advanced Features PLAY/PAUSE In stop mode, press SETUP, and the TV screen will display the Setup Menu as follows: Language Video Audio Rating Press to change items Press PLAY from stop mode to start playback. Press PAUSE during playback to pause playback. Press PLAY to resume normal playback. This function is not available if the elapsed time of current track is less than 10 seconds. Note: MP3 discs and some DVD discs do not have a 10 second review feature. Setup Menu A. Press ENTER to display each submenu B. Press SETUP to exit the Setup Menu Language Setup MENU/PBC During DVD, playback , press MENU to return to the program menu. In the Setup Menu, press MENU to return to the main menu or stop mode. Any time, press MENU to cancel the current OSD or some menus Select [Language] in the Setup Menu, and press ENTER to display the [Language] submenu: Note: This function is subject to the disc. Language OSD Menu Video English English English English Audio Rating Press item to Subtitle Audio DVD Menu select the menu TITLE During DVD playback, press TITLE to display the DVD title A . Press ENTER or B. Press C. Press OR to set repeatedly to return to the Setup Menu to go back one menu menu or play the first title. Note: This function is subject to the disc. Select [OSD Menu], and press ENTER or Language OSD Menu Subtitle Audio DVD Menu to display the [OSD Menu] submenu : Audio English French Spanish German Video English English English English Rating SLOW Press slow repeatedly to slow motion playback at variable speeds. A . Press ENTER to confirm. B. Press SETUP to exit the Setup Menu. -10- -19- Remote Control Operation Advanced Features Modes and Features Setup Language Setup Advanced Features During DVD or CD playback, press and hold to scan forward. The player will review the disc at 2, 4, 8 and 20 times normal speed as follows: X2 X4 X8 X20 Select [Subtitle], and press ENTER or Language OSD Menu Subtitle Audio DVD Menu to display the [Subtitle] submenu: Rating Video English English English English Audio Press PLAY to resume normal playback. English French Spanish German Auto Off Press to change your selection Note: Subtitle languages vary by disc. A. Press ENTER to confirm B. Press SETUP to exit the Setup Menu Select [Audio],and press ENTER or Language OSD Menu to display the [Audio] submenu: Audio Rating Video English English During DVD or CD playback, press and hold to scan in reverse. The player will review the disc at 2, 4, 8 and 20 times normal speed as follows: X20 Subtitle Audio DVD Menu English English English French Spanish German Press to change your selection Note: Audio languages vary by disc. Press PLAY to resume normal playback. A. Press ENTER to confirm B. Press SETUP to exit the Setup Menu Select [DVD Menu], and press ENTER or Language OSD Menu Subtitle Audio DVD Menu to display the [DVD Menu] submenu: Rating Video English English English English Audio PREV English French Spanish German Press to change your selection Note: Menu languages vary by disc. Press PREV to skip to previous chapter or track. A. Press ENTER to confirm B. Press SETUP to exit the Setup Menu NEXT Press NEXT to skip to the next chapter or track. -18- -11- Modes and Features Setup Video Setup Select [Video] in the Setup Menu, and press ENTER to display the [Video] sub menu : Language Video Audio 16:9 NTSC Advanced Features Remote Control Operation TIME Advanced Features Rating During playback, press TIME, and the [Track Search] menu will display as follows: CD Press item to Others TV shape TV system select the menu Search Time Track -:--:--- A . Press ENTER or B. Press to set to return to the Setup Menu Select [TV shape], and press ENTER or Language