User manual ASUS CUSL2CBP

CUSL2-C Black Pearl Intel® 815EP ATX Motherboard ® USER'S MANUAL USER'S NOTICE No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS"). ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. · Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. · Intel, LANDesk, and Pentium are registered trademarks of Intel Corporation. · Trend and ChipAwayVirus are trademarks of Trend Micro, Inc. · Windows and MS-DOS are registered trademarks of Microsoft Corporation. The product name and revision number are both printed on the product itself. Manual revisions are released for each product design represented by the digit before and after the period of the manual revision number. Manual updates are represented by the third digit in the manual revision number. For previous or updated manuals, BIOS, drivers, or product release information, contact ASUS at http://www.asus.com.tw or through any of the means indicated on the following page. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright © 2000 ASUSTeK COMPUTER INC. All Rights Reserved. Product Name: ASUS CUSL2-C BLACK PEARL Manual Revision: 1.04 E717 Release Date: February 2001 2 ASUS CUSL2-C Black Pearl User's Manual ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: Telephone: Fax: Email: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 +886-2-2894-3447 +886-2-2894-3449 info@asus.com.tw Technical Support MB/Others (Tel): +886-2-2890-7121 (English) Notebook (Tel): +886-2-2890-7122 (English) Desktop/Server (Tel):+886-2-2890-7123 (English) Fax: +886-2-2893-7775 Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL (America) Marketing Address: Fax: Email: Fax: Email: WWW: FTP: 6737 Mowry Avenue, Mowry Business Center, Building 2 Newark, CA 94560, USA +1-510-608-4555 tmd1@asus.com +1-510-608-4555 tsd@asus.com www.asus.com ftp.asus.com/Pub/ASUS Technical Support ASUS COMPUTER GmbH (Europe) Marketing Address: Fax: Email: Hotline: Fax: Support (Email): WWW: FTP: Harkortstr. 25, 40880 Ratingen, BRD, Germany +49-2102-442066 sales@asuscom.de (for marketing requests only) MB/Others: +49-2102-9599-0 Notebook: +49-2102-9599-10 +49-2102-9599-11 www.asuscom.de/de/support (for online support) www.asuscom.de ftp.asuscom.de/pub/ASUSCOM Technical Support ASUS CUSL2-C Black Pearl User's Manual 3 CONTENTS 1. INTRODUCTION ............................................................................. 7 2. FEATURES ........................................................................................ 8 2.1 The ASUS CUSL2-C Black Pearl ............................................... 8 2.1.1 Preface ............................................................................. 8 2.1.2 Specifications ................................................................ 10 2.1.3 Optional Components .................................................... 12 2.1.4 Performance ................................................................... 12 2.1.5 Intelligence .................................................................... 13 2.2 CUSL2-C Black Pearl Components ......................................... 14 3. HARDWARE SETUP ...................................................................... 16 3.1 CUSL2-C Black Pearl Layout .................................................. 16 3.2 Layout Contents ........................................................................ 17 3.3 Hardware Setup Procedure ....................................................... 19 3.4 Motherboard Settings ................................................................ 19 3.5 System Memory (DIMM) ......................................................... 26 3.5.1 General DIMM Notes .................................................... 26 3.5.2 Memory Installation ...................................................... 27 3.6 Central Processing Unit (CPU) ................................................. 28 3.7 Expansion Cards ....................................................................... 29 3.7.1 Expansion Card Installation Procedure ......................... 29 3.7.2 Assigning IRQs for Expansion Cards ............................ 29 3.7.3 Communication and Networking Riser (CNR) Slot ...... 30 3.7.4 Accelerated Graphics Port (AGP) Slot .......................... 31 3.8 External Connectors .................................................................. 32 3.9 Starting Up the First Time ........................................................ 43 4. BIOS SETUP ..................................................................................... 45 4.1 Managing and Updating Your BIOS ......................................... 45 4.1.1 Upon First Use of the Computer System ....................... 45 4.1.2 Updating BIOS Procedures ........................................... 46 4.2 BIOS Setup Program ................................................................ 49 4.2.1 BIOS Menu Bar ............................................................. 50 4.2.2 Legend Bar .................................................................... 50 4.3 Main Menu ................................................................................ 52 4.3.1 Primary & Secondary Master/Slave .............................. 53 4.3.2 Keyboard Features ......................................................... 56 4 ASUS CUSL2-C Black Pearl User's Manual CONTENTS 4.4 Advanced Menu ........................................................................ 58 4.4.1 Chip Configuration ........................................................ 61 4.4.2 I/O Device Configuration .............................................. 64 4.4.3 PCI Configuration ......................................................... 66 4.4.4 Shadow Configuration ................................................... 68 4.5 Power Menu .............................................................................. 69 4.5.1 Power Up Control .......................................................... 71 4.5.2 Hardware Monitor ......................................................... 73 4.6 Boot Menu ................................................................................ 74 4.7 Exit Menu ................................................................................. 76 5. SOFTWARE SETUP ....................................................................... 79 5.1 Install Operating System ........................................................... 79 5.2 Start Windows ........................................................................... 79 5.3 CUSL2-C BLACK PEARL Motherboard Support CD ............ 80 5.4 Personalized Boot Logo ............................................................ 82 6. SOFTWARE REFERENCE ........................................................... 79 6.1 Winbond Smart Manager .......................................................... 83 6.2 ASUS PC Probe ........................................................................ 86 6.3 ASUS LiveUpdate .................................................................... 90 6.5 CyberLink PowerPlayer SE ...................................................... 93 6.6 CyberLink PowerDVD ............................................................. 94 6.7 CyberLink VideoLive Mail ....................................................... 95 7. APPENDIX ........................................................................................ 97 7.1 PCI-L101 Fast Ethernet Card ................................................... 97 7.2 Glossary .................................................................................... 99 INDEX ................................................................................................. 103 ASUS CUSL2-C Black Pearl User's Manual 5 FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: · · This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING! Any changes or modifications to this product not expressly approved by the manufacturer could void any assurances of safety or performance and could result in violation of Part 15 of the FCC Rules. Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 6 ASUS CUSL2-C Black Pearl User's Manual 1. INTRODUCTION This manual is divided into the following sections: 1. 2. 3. 4. 5. 6. 7. INTRODUCTION FEATURES HARDWARE SETUP BIOS SETUP SOFTWARE SETUP SOFTWARE REFERENCE APPENDIX Manual information and checklist Production information and specifications Intructions on setting up the motherboard. Intructions on setting up the BIOS Intructions on setting up the included software Reference material for the included software Optional items and general reference 1.2 Item Checklist Check that your package is complete. If you discover damaged or missing items, contact your retailer. Optional Items Package Contents (1) ASUS Motherboard USB Hub CNR card (1) 40-pin 80-conductor ribbon cable LAN/Home PNA CNR card for internal UltraDMA100/66/33 ASUS iPanel IDE drives ASUS consumer infrared set (1) Ribbon cable for master and ASUS IrDA-compliant infrared module slave IDE drives (1) Ribbon cable for (1) 5.25" and (2) 3.5" floppy disk drives (1) Bag of spare jumpers (1) Support drivers and utilities (1) This Motherboard User's Manual (1) ASUS 2-port USB connector set with bracket (1) Quick Setup Guide ASUS CUSL2-C Black Pearl User's Manual 7 1. INTRODUCTION Manual / Checklist 1.1 How This Manual Is Organized 2. FEATURES 2.1 The ASUS CUSL2-C Black Pearl 2.1.1 Preface Congratulations! You are the proud owner of the first Special Edition motherboard ever manufactured by ASUS! The CUSL2-C Black Pearl motherboard is carefully designed for the demanding PC user who wants advanced features and the best processors. With a sleek and stylish profile, the new CUSL2-C Black Pearl gives you a fully customized high-performance PC. This kit includes everything you need to get your new CUSL2-C Black Pearl up and running. Refer to the instructions in the Quick Setup reference and get handy with the ASUS SmartTool! A top Intel 815EP chipset along with a Socket 370 PIII of your choice complete the masterpiece. We at ASUS hope that the CUSL2-C Black Pearl will be one of your most treasured possessions, sure to give excellent performance for a long time to come! Look at these features: · SmartCard Reader Option: Now you can power up your computer using a secure SmartCard. The CUSL2-C Black Pearl supports the latest PC/SC CompliantSmartCard Reader, the custom reading device, Read2-In-01. Visit the manufacturer's website: w w w. t z t . c o m . t w. Ask your local dealer for product availability. Refer to the Software Reference Section 6 for more detailed information about using the Winbond Smart Manager software. Read2-In-01 SmartCard Reader 8 ASUS CUSL2-C Black Pearl User's Manual 2. FEATURES · Personalized Boot Logo: Create original boot up screens with this easyto-use DOS utility. ASUS offers LOGO.EXE. Choose a bitmap image from the selections we offer, or create your own image files. · Image Library: ASUS supplies you with a great selection of 16-color 640 x 480 pixel images compatible with DOS, BIOS and boot-up: wallpaper.bmp rough3.bmp rough1.bmp rough2.bmp scen1.bmp scape1.bmp china1.bmp sketch1.bmp season2.bmp sea2.bmp season1.bmp cartoon2.bmp interior2.bmp interior1.bmp leafred.bmp leaf1.bmp water1.bmp water2.bmp water3.bmp sodo.bmp ASUS CUSL2-C Black Pearl User's Manual 9 2. FEATURES 2.1.2 Specifications · Latest Intel Processor Support 100/133MHz FSB FC-PGA Pentium® III CeleronTM 66MHz FSB FC-PGA ® North Bridge System Chipset: The Intel 815EP chipset supports a 66/100/ 133 Front Side Bus (FSB), up to 512MB of PC100/PC133 SDRAM, and AGP 4X mode, which can transport twice the amount of data compared to the current AGP standard. South Bridge System Chipset: The Intel I/O Controller Hub 2 (ICH2) features support for UltraDMA/100, which allows burst mode data transfer rates of up to 100MB/sec; two USB controllers for a total of 4 USB ports; and six channel AC97 CODEC support. Intel® Accelerated Hub Architecture: Features a dedicated high speed hub link between the ICH2 and GMCH with a bandwidth of 266MB/sec ­ twice the maximum bandwidth of the PCI bus. PC100/PC133 Memory Support: Equipped with three Dual Inline Memory Module (DIMM) sockets to support PC100/PC133-compliant SDRAMs (available in 64, 128, 256, 512MB densities) up to 512MB. AGP Slot: Comes with an Accelerated Graphics Port slot that supports AGP cards for high performance, component level interconnect targeted at 3D graphical applications supporting 133MHz 4X mode. Backward compatible to support AGP 2X. UltraDMA33/66/100 Support: Comes with an onboard PCI Bus Master IDE controller with two connectors that support four IDE devices on two channels. Supports UltraDMA/100, UltraDMA/66, UltraDMA/33, PIO Modes 3 & 4 and Bus Master IDE DMA Mode 2, and Enhanced IDE devices, such as DVD-ROM, CD-ROM, CD-R/RW, LS-120, and Tape Backup drives. Wake-Up Support: Supports Wake-On-LAN and Wake-On-Ring, Keyboard Wake-Up, and BIOS Wake-Up. JumperFreeTM Mode: Allows processor settings and easy overclocking of frequency and Vcore voltage all through BIOS setup when JumperFreeTM mode is enabled. Easy-to-use DIP switches instead of jumpers are included to allow manual adjustment of the processor's external frequency. Around-the-Clock Intrusion Detection: Chassis intrusion circuitry can log chassis open events into LDCM. The onboard battery supports detection even when normal power is removed and through a new design, battery drain is even lower than the RTC used for keeping time! Firmware Hub: Provides security-enhancements in computer platforms by supporting Random Number Generator (RNG). · 2. FEA TURES Specifications 10 · · · · · · · · · ASUS CUSL2-C Black Pearl User's Manual 2. FEATURES · PC Health Monitoring: Provides an easy way to examine and manage system status information, such as CPU and systerm voltages, temperatures, and fan status through the onboard hardware ASUS ASIC and the bundled ASUS PC Probe or Intel LDCM software. CNR Support: A Communication and Networking Riser (CNR) slot provides an interface to support very affordable multichannel audio, V.90 analog modem, Home PNA, 10/100 Ethernet networking, and USB hub. PCI Expansion Slots: Provides six 32-bit PCI (PCI 2.2 compliant) expansion slots. All PCI slots can support Bus Master PCI cards, such as SCSI or LAN cards. (PCI supports up to 133MB/s maximum throughput.) Low Pin Count (LPC) Multi-I/O: Provides two high-speed UART compatible serial ports and one parallel port with EPP and ECP capabilities. UART2 can also be directed from COM2 to the Infrared Module for wireless connections. Enhanced ACPI & Anti-Boot Virus Protection: Programmable BIOS (Flash EEPROM), offering enhanced ACPI for Windows 98/2000/Millenium compatibility, built-in firmware-based virus protection, and autodetection of most devices for virtually automatic setup. Smart BIOS: The firmware hub gives a new easy-to-use interface which provides more control and protection over the motherboard. Provides Vcore and CPU/ SDRAM frequency adjustments, boot block write protection, and HD/SCSI/MO/ ZIP/CD/Floppy boot selection. Hardware random number generator supports new security software for data protection and secured Internet transactions. Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI master busses to the memory and processor. Onboard LED: The onboard LED will light up when there is standby power to the motherboard. This acts as a reminder to the user to turn OFF the power before plugging and unplugging devices so as not to damage the motherboard, peripherals, and/or components. One Touch Management: Supports an optional ASUS iPanel, an easy to access box with system information LED display, front I/O ports, and space reserved for a hard disk drive. With an ASUS iPanel, you can monitor your computer system's vital components. SMBus: Features the System Management Bus interface, which is used to physically transport commands and information between SMBus devices. Personalized Boot Logo: Create unique boot up screens with this easy-to-use DOS utility. SmartCard Reader: Onboard header connects directly to a SmartCard reader for security and SmartCard memory chip editing. · · · · · · · · · · · ASUS CUSL2-C Black Pearl User's Manual 11 2. FEA TURES Specifications 2. FEATURES 2.1.3 Optional Components The following onboard components are optional at the time of purchase: · Onboard Audio: AC97 V2.1 compliant Audio Codec with 3D sound circuitry and sample rate conversion from 7kHz to 48kHz. UltraPerformance: Onboard IDE Bus Master controller with two connectors that support four IDE devices in two channels. Supports UltraDMA/100, UltraDMA/ 66, UltraDMA/33 (IDE DMA Mode 2), PIO Modes 3 & 4, and supports Enhanced IDE devices, such as DVD-ROM, CD-ROM, CD-R/RW, LS-120, and Tape Backup drives. High-Speed Data Transfer Interface: IDE transfers using UltraDMA/66 Bus Master IDE can handle rates up to 66.6MB/s. This motherboard with its chipset and support for UltraDMA/100 increases the data transfer rate to 100MB/s. UltraDMA/100 is backward compatible with DMA/66, DMA/33, and DMA and with existing DMA devices and systems so there is no need to upgrade current EIDE/IDE drives and host systems. (UltraDMA/66/100 requires a 40-pin 80conductor cable to be enabled.) Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI master buses to memory and processor. SDRAM Optimized Performance: This motherboard supports PC133-compliant Synchronous Dynamic Random Access Memory (SDRAM), which increases the data transfer rate to 1066MB/s max. ACPI Ready: ACPI (Advanced Configuration and Power Interface) is also implemented on all ASUS smart series motherboards. ACPI provides more Energy Saving Features for future operating systems (OS) supporting OS Direct Power Management (OSPM) functionality. With these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards. To fully utilize the benefits of ACPI, an ACPI-supported OS, such as Windows 98/2000/Millenium, must be used. Suspend and Go: Suspend-to-RAM (STR) provides maximum power savings as an alternative to leaving the computer ON and QuickStartTM so that you do not have to wait for a long time for system bootup. New Compliancy: Both the BIOS and hardware levels of the motherboard meet the stringent requirements for PC 99 certification. The new PC 99 requirements for systems and components are based on the following high-level goals: support for Plug and Play compatibility and power management for configuring and managing all system components, and 32-bit device drivers and installation procedures for Windows 95/98/NT and later. Color-coded connectors and descriptive icons make identification easy as required by PC 99. ASUS CUSL2-C Black Pearl User's Manual 2.1.4 Performance · 2. FEA TURES Performance 12 · · · · · · 2. FEATURES 2.1.5 Intelligence · Fan Status Monitoring and Alarm: To prevent system overheat and system damage, the CPU, power supply, and system fans can be monitored for RPM and failure. All the fans are set for its normal RPM range and alarm thresholds. Temperature Monitoring and Alert: To prevent system overheat and system damage, this motherboard supports processor thermal sensing and auto-protection. Voltage Monitoring and Alert: System voltage levels are monitored to ensure stable current to critical motherboard components. Voltage specifications are more critical for future processors, so monitoring is necessary to ensure proper system configuration and management. System Resources Alert: Today's operating systems, such as Windows 98/ Millenium, Windows NT/2000, require much more memory and hard drive space to present enormous user interfaces and run large applications. The onboard hardware ASUS ASIC in conjunction with either the bundled ASUS PC Probe or Intel LDCM will warn the user before the system resources are used up to prevent possible application crashes. Suggestions will give the user information on managing their limited resources more efficiently. Dual Function Power Button: Through BIOS, the power button can be defined as the "Stand by" (a.k.a. Suspend or Sleep) button or as the Soft-Off (see ATX Power / Soft-Off Switch Lead in 3.8 Connectors for more information) button. Regardless of the setting, pushing the power button for more than 4 seconds will enter the Soft-Off mode. Remote Ring On (requires modem): This allows a computer to be turned on remotely through an internal or external modem. With this benefit on-hand, users can access any information from their computers from anywhere in the world. Message LED (requires ACPI OS support): Message LEDs now act as information providers. Through the way a particular LED illuminates, the user can determine if a message has been received from a fax/modem. A simple glimpse provides useful information to the user. This function requires ACPI OS and driver support. Peripheral Power Up: Keyboard or Mouse power up can be enabled or disabled through BIOS setup to allow the computer to be powered ON using your keyboard or mouse click. · · · · · · · ASUS CUSL2-C Black Pearl User's Manual 13 2. FEA TURES Intelligence 2. FEATURES 2.2 CUSL2-C Black Pearl Components See opposite page for locations. Location Processor Support Socket 370 for Pentium III/Celeron (FC-PGA) Processors ..... 1 Feature Setting DIP Switches ................................................... 5 Chipsets Intel 815EP Chipset .................................................................. 2 Intel I/O Controller Hub 2 (ICH2) ......................................... 10 Firmware Hub (FWH) ............................................................ 12 Low Pin Count (LPC) Multi-I/O Chipset ............................... 11 Main Memory 3 DIMM Sockets (maximum 512MB support) ........................ 3 PC133 SDRAM support Expansion Slots 6 PCI Slots .............................................................................. 18 1 Accelerated Graphics Port (AGP) Slot ................................ 19 1 CNR Slot ............................................................................. 15 System I/O USB Headers .......................................................................... 14 1 Floppy Disk Drive Connector ............................................... 6 2 IDE Connectors (UltraDMA/100 Support) ........................... 4 1 SmartCard Reader Connector ................................................ 7 1 ASUS iPanel Connector ........................................................ 8 1 Parallel Port Connector ............................................. (Top) 22 1 Serial COM1 Port Connector .............................. (Bottom) 21 1 Serial COM2 Port Connector .............................. (Bottom) 23 2 USB Port Connectors ......................................................... 24 1 PS/2 Mouse Connector .............................................. (Top) 25 1 PS/2 Keyboard Connector ................................... (Bottom) 25 Audio AC'97 V2.1 Audio Codec (optional) 1 Game/MIDI Connector (on audio model only) 1 Line Out Connector (on audio model only) 1 Line In Connector (on audio model only) 1 Microphone Connector (on audio model only) Network Features Wake-On-LAN Connector ...................................................... 17 Wake-On-Ring Connector ........................................................ 9 Hardware Monitoring System Voltage Monitoring (integrated in ASUS ASIC) ....... 13 3 Fan Power and Speed Monitoring Connectors Power ATX Power Supply Connector ............................................... 20 Special Feature Onboard LED ......................................................................... 16 Form Factor ATX 2. FEA TURES MB Components 14 ASUS CUSL2-C Black Pearl User's Manual 2. FEATURES 2.2.1 Component Locations 1 5 4 3 2 2 3 456 1 0 9 8 7 6 5 14 13 12 11 10 9 8 7 ASUS CUSL2-C Black Pearl User's Manual 15 2. FEA TURES Component Location 3. HARDWARE SETUP 3.1 CUSL2-C Black Pearl Layout PS/2KBMS T: Mouse B: Keyboard KBPWR CPU_FAN USB DIMM1 (64/72 bit, 168-pin module) DIMM2 (64/72 bit, 168-pin module) DIMM3 (64/72 bit, 168-pin module) T: Port1 B: Port2 VIO COM1 PARALLEL PORT USBPWR01 PWR_FAN Socket 370 SECONDARY IDE DSW ATX Power Connector COM2 Intel 815EP Chipset Accelerated Graphics Port (AGP) PCI1 PCI2 WOL_CON SMB ® CR2032 3V Lithium Cell CMOS Power Intel I/O Controller Hub (ICH2) CLRTC PCI3 JTPWR AFPANEL PCI4 PLED2 USB2 ASUS ASIC with Hardware Monitor JEN ACHA WOR SMARTCON IDELED PANEL USBPWR2 PCI5 CUSL2-C BP PCI6 USBPWR56 Firmware Hub (FWH) CHA_FAN CNR_SLOT Super I/O USB56 Grayed components are optional at the time of purchase. 16 ASUS CUSL2-C Black Pearl User's Manual FLOPPY ROW 0 1 23 45 PRIMARY IDE DIP Switches 3. H/W SETUP Motherboard Layout 3. HARDWARE SETUP 3.2 Layout Contents Motherboard Settings 1) JEN 2) USBPWR01 USBPWR2 USBPWR56 3) KBPWR 4) VIO 5) DSW p.20 JumperFreeTM Mode (Enable/Disable) p.21 USB Device Wake Up (Enable/Disable) p.22 Keyboard Power Up (Enable/Disable) p.23 Voltage I/O Setting (3.3V/3.40V/3.60V) p.24 CPU External Frequency Setting Expansion Slots 1) 2) 3) 4) 5) DIMM1/2/3 CPU PCI1/2/3/4/5/6 CNR1 AGP p.26 p.28 p.29 p.30 p.31 168-Pin System Memory Support Central Processing Unit (CPU) 32-bit PCI Bus Expansion Slots Communication and Network Riser Slot Accelerated Graphics Port (AGP) Slot Connectors 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) PS2KBMS PS2KBMS USB PRINTER COM1/COM2 GAME_AUDIO GAME_AUDIO FLOPPY PRIMARY/SECONDARY IDE IDELED CPU_FAN, PWR_FAN CHA_FAN 12) AFPANEL_CON 13) SMARTCON 14) SMB 15) ACHA 16) WOL_CON 17) WOR_CON 18) USB2, USB56 p.32 PS/2 Mouse Connector (6 pin female) p.32 PS/2 Keyboard Connector (6 pin female) p.33 Universal Serial Bus Ports (Two 4 pin female) p.33 Parallel Port Connector (25 pin female) p.33 Serial Port Connectors (9 pin male, 10-1 pin) p.34 Game/MIDI Connector (15 pin female) (optional) p.34 Audio Port Connectors (Three 1/8" female) (optional) p.34 Floppy Disk Drive Connector (34-1pin) p.35 Primary/Secondary IDE Connectors (Two 40-1 pin) p.36 IDE Activity LED (2 pin) p.36 CPU, Power Supply, Chassis Fan Connectors (Three 3 pin) p.37 ASUS iPanel Connector (12-1 pin) p.37 ASUS SmartCard Connector (10-1 pin) p.38 SMBus Connector (5-1 pin) p.38 Chassis Intrusion Connector (2 pin) p.39 Wake-On-LAN Connector (3 pin) p.39 Wake-On-Ring Connector (2 pin) p.40 USB Headers (5-1 pin, 5-1 pin) ASUS CUSL2-C Black Pearl User's Manual 17 3. H/W SETUP Layout Contents 3. HARDWARE SETUP 19) JTPWR 20) ATXPWR 21) PWRLED (PANEL) 22) KEYLOCK (PANEL) 23) SPEAKER (PANEL) 24) MSG.LED (PANEL) 25) SMI (PANEL) 26) PWRSW (PANEL) 27) RESET (PANEL) p.40 Power Supply Thermal Sensor Connector (2 pins) p.41 ATX Power Supply Connector (20 pins) p.42 System Power LED Lead (3-1 pins) p.42 Keyboard Lock Switch Lead (2 pins) p.42 System Warning Speaker Connector (4 pins) p.42 System Message LED (2 pins) p.42 System Management Interrupt Switch Lead (2 pins) p.42 ATX Power / Soft-Off Switch Lead (2 pins) p.42 Reset Switch Lead (2 pins) 3. H/W SETUP Layout Contents 18 ASUS CUSL2-C Black Pearl User's Manual 3. HARDWARE SETUP 3.3 Hardware Setup Procedure Before using your computer, you must complete the following steps: · Check Motherboard Settings · Install Memory Modules · Install the Central Processing Unit (CPU) · Install Expansion Cards · Connect Ribbon Cables, Panel Wires, and Power Supply 3.4 Motherboard Settings WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Hold components by the edges and try not to touch the IC chips, leads or connectors, or other components. 4. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system. 5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX power connector on the motherboard. WARNING! Make sure that you unplug your power supply when adding or removing system components. Failure to do so may cause severe damage to your motherboard, peripherals, and/or components. The onboard LED when lit acts as a reminder that the system is in suspend or soft-off mode and not powered OFF. PLED2 ® CUSL2-C BP ON Standby Power OFF Powered Off CUSL2-C BP Onboard LED ASUS CUSL2-C Black Pearl User's Manual 19 3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP Motherboard Feature Settings The motherboard's onboard functions are either adjusted through jumpers or DIP switches. When using DIP switches, the white block represents the switch's position. The example below shows all the switches in the OFF position. 12345 OFF OFF ® DSW ON ON ® CUSL2-C BP CUSL2-C BP DIP Switches 1. Frequency Selection 2. Frequency Selection 3. Frequency Selection 4. Frequency Selection 5. Frequency Selection. CUSL2-C BP Disable ON JEN Enable(default) 23 CUSL2-C BP JumperFreeTM Mode Setting 12 20 ASUS CUSL2-C Black Pearl User's Manual 12345 3. H/W SETUP Motherboard Settings 1) JumperFreeTM Mode (JEN) This jumper allows you to enable or disable the JumperFreeTM mode. The JumperFreeTM mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu). NOTE: In JumperFreeTM mode, all dip switches must be set to OFF. Setting JEN Disable (Jumper) [1-2] Enable (JumperFree) [2-3] (default) DSW