User manual ASUS P4B266C

® P4B266-C User Guide Motherboard E897 Checklist First Edition December 2001 Copyright © 2001 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents FCC/CDC statements ..................................................................... vi Safety information .......................................................................... vii About this guide ............................................................................ viii How this guide is organized .................................................. viii Conventions used in this guide ............................................... ix Where to find more information .............................................. ix ASUS contact information ................................................................ x Features Chapter 1: Product introduction ......................................... 1-1 1.1 1.2 1.3 Welcome! ............................................................................ Package contents ............................................................... Special features .................................................................. 1.3.1 Product highlights ................................................... 1.3.2 Value-added solutions ............................................ Overview ............................................................................. 1.4.1 Motherboard components ....................................... 1-1 1-1 1-2 1-2 1-3 1-4 1-4 1.4 Chapter 2: Hardware information ........................................ 2-1 2.1 Motherboard installation ...................................................... 2-1 2.1.1 Placement direction ................................................ 2-1 2.1.2 Screw holes ............................................................ 2-1 Motherboard layout ............................................................. 2-2 Before you proceed ............................................................. 2-3 Central Processing Unit (CPU) ............................................ 2-4 2.4.1 Overview ................................................................ 2-4 2.4.2 Installing the CPU ................................................... 2-5 2.4.3 Installing the heatsink and fan ................................. 2-7 2.4.4 Connecting the CPU fan cable ................................ 2-9 System memory ................................................................ 2-10 2.5.1 Overview .............................................................. 2-10 2.5.2 Memory configurations .......................................... 2-11 2.5.3 Installing a DIMM ................................................... 2-11 2.5.4 Removing a DIMM ................................................ 2-12 2.2 2.3 2.4 2.5 iii Contents Safeguards 2.6 2.7 2.8 Expansion slots ................................................................. 2.6.1 Installing an expansion card .................................. 2.6.2 Configuring an expansion card ............................. 2.6.3 PCI slots ............................................................... 2.6.4 AGP slot ............................................................... Switches and jumpers ....................................................... Connectors ....................................................................... 2-13 2-13 2-14 2-15 2-15 2-16 2-24 Chapter 3: Powering up ....................................................... 3-1 3.1 3.2 Starting up for the first time .................................................. 3-1 Powering off the computer ................................................... 3-2 Chapter 4: BIOS setup ......................................................... 4-1 4.1 Managing and updating your BIOS ...................................... 4-1 4.1.1 Using the computer system for the first time ........... 4-1 4.1.2 Updating BIOS procedures ..................................... 4-3 BIOS Setup program ........................................................... 4-5 4.2.1 BIOS menu bar ....................................................... 4-6 4.2.2 Legend bar ............................................................. 4-6 Main Menu .......................................................................... 4-8 4.3.1 Primary and Secondary Master/Slave ..................... 4-9 4.3.2 Keyboard Features ............................................... 4-13 Advanced Menu ................................................................ 4-15 4.4.1 Chip Configuration ................................................ 4-18 4.4.2 I/O Device Configuration ....................................... 4-21 4.4.3 PCI Configuration ................................................. 4-23 Power Menu ...................................................................... 4-25 4.5.1 Power Up Control ................................................. 4-27 4.5.2 Hardware Monitor ................................................. 4-29 Boot Menu ........................................................................ 4-30 Exit Menu .......................................................................... 4-33 4.2 4.3 4.4 4.5 4.6 4.7 iv Contents Chapter 5: Software support ............................................... 5-1 5.1 5.2 Install an operating system .................................................. 5-1 Support CD information ....................................................... 5-1 5.2.1 Running the support CD ......................................... 5-1 5.2.2 Main menu ............................................................. 5-2 5.2.3 Software menu ....................................................... 5-3 5.2.4 Drivers menu .......................................................... 5-5 5.2.5 DOS Utilities menu ................................................. 5-6 5.2.6 ASUS Contact Information ...................................... 5-6 5.2.7 Other information .................................................... 5-7 Software information ........................................................... 5-9 5.3.1 ASUS Update ......................................................... 5-9 5.3.2 ASUS MyLogoTM .................................................. 5-10 5.3.3 Personalized Boot Logo ........................................ 5-12 5.3.4 Multi-Channel Audio Feature ................................ 5-13 5.3 Glossary ................................................................................ G-1 Index ........................................................................................ I-1 v FCC/CDC statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: · · This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. vi Safety information Electrical safety · To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. · When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. · Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. · Seek professional assistance before using an adpater or extension cord. These devices could interrupt the grounding circuit. · Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. · If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. Operation safety · Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. · Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. · To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry. · Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet. · Place the product on a stable surface. · If you encounter technical problems with the product, contact a qualified service technician or your retailer. vii About this guide This user guide contains the information you need when installing the ASUS P4B266-C motherboard. How this guide is organized This manual contains the following parts: · Chapter 1: Product introduction This chapter describes the features of the P4B266-C motherboard. It includes brief descriptions of the special attributes of the motherboard and the new technology it supports. Chapter 2: Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the switches, jumpers, and connectors on the motherboard. Chapter 3: Powering up This chapter describes the power up sequence and gives information on the BIOS beep codes. Chapter 4: BIOS setup This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. Chapter 5: Software support This chapter describes the contents of the support CD that comes with the motherboard package. Glossary This part lists the technical terms that you may encounter when reading this document. Index This part contains an alphabetical list of the topics found in this document. · · · · · · viii Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS Websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. The ASUS websites are listed in the ASUS Contact Information on page x. 2. Optional Documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package. ix ASUS contact information ASUSTeK COMPUTER INC. (Asia-Pacific) Address: General Tel: General Fax: General Email: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 +886-2-2894-3447 +886-2-2894-3449 info@asus.com.tw Technical Support MB/Others (Tel): Notebook (Tel): Desktop/Server (Tel): Support Fax: Support Email: Web Site: Newsgroup: +886-2-2890-7121 (English) +886-2-2890-7122 (English) +886-2-2890-7123 (English) +886-2-2890-7698 tsd@asus.com.tw www.asus.com.tw cscnews.asus.com.tw ASUS COMPUTER INTERNATIONAL (America) Address: General Fax: General Email: 6737 Mowry Avenue, Mowry Business Center, Building 2, Newark, CA 94560, USA +1-510-608-4555 tmd1@asus.com Technical Support Support Fax: Notebook (Tel): Web Site: Support Email: +1-510-608-4555 1-877-918-ASUS (2787) www.asus.com tsd@asus.com ASUS COMPUTER GmbH (Europe) Address: General Fax: General Email: Harkortstr. 25, 40880 Ratingen, BRD, Germany +49-2102-442066 sales@asuscom.de (for marketing requests only) Technical Support Support Hotline: Notebook (Tel): Support Fax: Support (Email): Web Site: MB/Others: +49-2102-9599-0 +49-2102-9599-10 +49-2102-9599-11 www.asuscom.de/de/support (for online support) www.asuscom.de x Chapter 1 This chapter describes the features of the P4B266-C motherboard. It includes brief explanations of the special attributes of the motherboard and the new technology it supports. Product introduction ASUS P4B266-C motherboard 1.1 Welcome! Thank you for buying the ASUS® P4B266-C motherboard! The ASUS P4B266-C motherboard delivers a host of new features and latest technology making it another standout in the long line of ASUS quality motherboards! The P4B266-C incorporates the Intel® Pentium® 4 Processor in 478-pin package/Northwood Processor coupled with the Intel® 845D (Brookdale) chipset to set a new benchmark for an effective desktop platform solution. Supporting up to 2GB of system memory with PC2100/1600 DDR SDRAM, high-resolution graphics via an AGP 4X slot, high-speed data transfers using the ATA100 protocol, and 6-channel PCI audio features, the P4B266-C is your perfect vehicle to get ahead in the world of power computing! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents ASUS P4B266-C motherboard (ATX form factor: 12-in x 9-in) ASUS P4B266-C support CD ASUS 2-port USB module 80-conductor ribbon cable for UltraDMA/33/66/100 IDE drives 40-conductor IDE cable Ribbon cable for a 3.5-inch floppy drive Bag of extra jumper caps User Guide Quick Setup Guide and Reference Card (retail box only) Jumpers and Connectors Sticker (retail box only) Check your P4B266-C package for the following items. If any of the above items is damaged or missing, contact your retailer. ASUS P4B266-C motherboard user guide 1-1 1.3 Special features 1.3.1 Product highlights Latest processor technology The P4B266-C motherboard supports the latest Intel® Pentium® 4 478/ Northwood Processor via a 478-pin surface mount ZIF socket. The Pentium 4 processor utilizes the advanced 0.18 micron processor core in FC-PGA2 package for a 2.0GHz frequency, while the Northwood processor uses the 0.13 micron processor core with 512KB L2 cache for up to a speedy 2.4+GHz frequency. Pentium 4 offers optimized performance for audio, video, and Internet applications. See page 2-4. DDR memory support Employing the Double Data Rate (DDR) memory technology, the P4B266-C motherboard supports up to 2GB of system memory using PC2100/1600 DDR DIMMs. The ultra-fast 266MHz memory bus doubles the speed of the PC133 SDRAM to deliver the required bandwidth for the latest 3D graphics, multimedia, and Internet applications. See page 2-10. PCI-based HRTF 3D positional audio (on audio models only) Audio models include the C-Media CMI8738 audio chip with high speed PCI V2.1 bus controller. This audio controller supports the legacy audio SBPROTM, FM emulator/DLS Wave music synthesis, and HRTF 3D positional audio functions. The audio controller also meets PC '99 requirements and supports the 24-bit Sony/Philips Digital Interface (S/PDIF) In (0.5V~5V) and S/PDIF Out (44.1K and 48K formats) module. Experience 5.1-channel surround sound and enhanced 3D audio while playing DVDs and computer games. See pages 1-7 and 2-31. Onboard LAN (on LAN models only) The motherboard incorporates the RealTek RTL8100 LAN controller to support 10BASE-T/100BASE-TX Fast Ethernet networking. AGP burn-out protection An AGP warning LED is onboard to serve as a smart burn-out protection for the motherboard. This LED prevents you from powering up the system if you installed any AGP card that is not supported by the motherboard. See pages 1-6 and 2-3 for details. 1-2 Chapter 1: Product introduction ASUS MyLogoTM This new feature present in the P4B266-C motherboard allows you to personalize and add style to your system with customizable boot logos. See section "5.3.2 ASUS MyLogoTM" on page 5-10. ASUS EZ PlugTM This patented ASUS technology lets you use your existing power supply rather than buying a new ATX 12V power supply. The ASUS EZ PlugTM is a 4-pin auxiliary +12V connector mounted on the motherboard to accommodate a regular 4-pin device power connector from the power supply. This connector is necessary to provide the additional power required by the Pentium® 4 CPU. See page 2-28. 1.3.2 Value-added solutions Overclocking The P4B266-C overclocking features: · adjustable CPU frequency multiple in BIOS using the ASUS JumperFreeTM solution · adjsutable CPU FSB/memory frequency ratio · Stepless Frequency Selection (SFS) for fine-tuning system bus frequency from 100MHz up to 200MHz at 1MHz increments · optimized system performance through BIOS built-in Turbo Mode · adjustable CPU VCORE and DDR memory voltage Special Card Reader support A special connector for Smart Card Reader comes onboard to support cutting-edge technology for increased security in authenticating online transactions, editing IC-based information, and a lot more. ASUS P4B266-C motherboard user guide 1-3 1.4 Overview Before you install the P4B266-C motherboard, familiarize yourself with its physical configuration and available features to facilitate the motherboard installation and future upgrades. A sufficient knowledge of the motherboard specifications will also help you avoid mistakes that may damage the board and its components. 1.4.1 Motherboard components The following are the major components of the P4B266-C motherboard as pointed out in the picture on page 1-5. 1. 2. 3. 4. 5. 6. 7. 8. 9. 11. ATX 12V connector CPU socket North Bridge controller DDR DIMM sockets AGP warning LED ASUS EZ PlugTM auxiliary +12V connector ATX power connector IDE connectors Floppy connector DIP switches 20. PS/2 mouse port 21. RJ-45 port (optional) 22. Parallel port 23. Game/MIDI port (optional) 24. Microphone jack (optional) 25. Line In jack (optional) 26. Line Out jack (optional) 27. Serial ports 28. USB ports 29. Keyboard port 10. South Bridge controller 12. ASUS ASIC 13. Super I/O controller 14. Flash EEPROM 15. Onboard LED 16. Audio controller (optional) 17. PCI slots 18. LAN controller (optional) 19. AGP slot See page 1-6 for a brief description of each component. Refer to Chapter 2 for detailed information on the motherboard components. 1-4 Chapter 1: Product introduction 1 2 3 4 5 6 7 8 19 18 9 10 17 16 15 14 13 12 11 20 21 22 23 29 28 27 26 25 24 1-5 ASUS P4B266-C motherboard user guide 1 2 ATX 12V connector. This power connector connects the 4-pin 12V plug from the ATX 12V power supply. CPU socket. A 478-pin surface mount, Zero Insertion Force (ZIF) socket called mPGA478 B. This socket accommodates the Intel® Pentium® 4 478/Northwood Processor with 400MHz system bus. North bridge controller. This controller called the Intel Memory Controller Hub (MCH) is one of the two major components of the Intel 845D (Brookdale) chipset. The MCH and the south bridge Intel I/O Controller Hub 2 (ICH2) are interconnected through the Intel proprietary Hub interface. The MCH provides the processor interface, memory interface, AGP interface, and Hub Interface. DDR DIMM sockets. These two 184-pin DIMM sockets support up to 2GB using unbuffered ECC or non-ECC PC2100/1600 DDR DIMMs. AGP warning LED. Serving as a smart burn-out protection for the motherboard, this red LED lights up if you plug in any 3.3V AGP card into the AGP slot. When this LED is lit, there is no way you can turn on the system power even if you press the power button. ASUS EZ PlugTM Auxilliary +12V connector. This ASUS patented auxilliary power connector is used if you don't have an ATX +12V power supply. Connect a 4-pin device connector from a standard power supply to this connector to provide sufficient power to the CPU. ATX power connector. This 20-pin connector connects to an ATX +12V power supply. The power supply must have at least 1A on the +5V standby lead (+5VSB). IDE connectors. These dual-channel bus master IDE connectors support up to four Ultra DMA/100/66, PIO Modes 3 & 4 IDE devices. Both the primary (blue) and secondary (black) connectors are slotted to prevent incorrect insertion of the IDE ribbon cable. Floppy disk connector. This connector accommodates the provided ribbon cable for the floppy disk drive. One side of the connector is slotted to prevent incorrect insertion of the floppy disk cable. 3 4 5 6 7 8 9 1-6 Chapter 1: Product introduction 10 South bridge controller. Referred to as the Intel I/O Controller Hub 2 (ICH2) of the Intel 845D chipset, this controller provides the I/O subsystem that allows access to the rest of the system. The ICH2 integrates I/O functions such as system bus interface, Ultra ATA/100, Low Pin Count (LPC) interface, Universal Serial Bus (USB) 1.1 interface, and PCI interface. DIP switches. This 10-switch Dual Inline Package (DIP) allows you to set the CPU external frequency. ASUS ASIC. This chip performs multiple system functions that include hardware and system voltage monitoring, IRQ routing, among others. Super I/O controller. This Low Pin Count (LPC) interface provides the commonly used Super I/O functionality. The chipset supports a high-performance floppy disk controller for a 360K/720K/1.44M/ 2.88M floppy disk drive, a multi-mode parallel port, two standard compatible UARTs, a Standard Infrared (SIR), one MPU-401 UART mode compatible MIDI/game port, and a Flash ROM interface. Flash EEPROM. This 2Mb firmware contains the programmable BIOS program. Onboard LED. This onboard LED lights up if there is a standby power on the motherboard. This LED acts as a reminder to turn off the system power before plugging or unplugging devices. Audio controller. This C-Media 6-channel PCI audio chip supports legacy audio and HRTF 3D positional audio functions. The chip also supports 24-bit S/PDIF In (0.5~5V) and S/PDIF Out (44.1K and 48K formats) professional digital audio interface. (on audio models only) PCI slots. These six 32-bit PCI 2.2 expansion slots support bus master PCI cards like SCSI or LAN cards with 133MB/s maximum throughput. LAN controller. This RealTek 8100 PCI LAN controller fully supports 10BASE-T/100BASE-TX Ethernet networking. (on LAN models only) AGP slot. This Accelerated Graphics Port (AGP) slot supports 1.5V AGP4X mode graphics cards for 3D graphical applications. PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse. 11 12 13 14 15 16 17 18 19 20 ASUS P4B266-C motherboard user guide 1-7 21 22 23 RJ-45 port. This port allows connection to a Local Area Network (LAN) through a network hub. (on LAN models only) Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. Game/MIDI port. This connector supports a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files. (on audio models only) Microphone jack. This Mic (pink) jack connects a microphone. In 6-channel mode, the function of this jack becomes Bass/Center. (on audio models only) Line In jack. This Line In (light blue) jack connects a tape player or other audio sources. In 6-channel mode, the function of this jack becomes Rear Speaker Out. (on audio models only) Line Out jack. This Line Out (lime) jack connects a headphone or a speaker. (on audio models only) Serial ports. These two 9-pin COM1/COM2 ports are for pointing devices or other serial devices. USB ports. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB devices such as a mouse and PDA. PS/2 keyboard port. This purple 6-pin connector is for a PS/2 keyboard. 24 25 26 27 28 29 1-8 Chapter 1: Product introduction