User manual ASUS P4B533-VM

P4B533-VM User Guide Motherboard E988 Checklist First Edition April 2002 Copyright © 2002 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents Contents ......................................................................................... iii FCC/CDC statements ..................................................................... vi Federal Communications Commission Statement ................ vi Canadian Department of Communications Statement .......... vi Safety information ......................................................................... vii About this guide ............................................................................ viii How this guide is organized ................................................ viii Conventions used in this guide ............................................. ix Where to find more information ............................................. ix ASUS contact information ............................................................... x P4B533-VM specifications summary .............................................. xi Features Chapter 1: Product introduction 1.1 1.2 1.3 Welcome! ........................................................................... 1-1 Package contents ............................................................... 1-1 Special features .................................................................. 1-2 1.3.1 Product highlights .................................................. 1-2 1.3.2 Value-added solutions ............................................ 1-3 Motherboard overview ........................................................ 1-4 1.4.1 Major components ................................................. 1-4 1.4.2 Core specifications ................................................ 1-6 1.4 Chapter 2: Hardware information 2.1 Motherboard installation ..................................................... 2-1 2.1.1 Placement direction ............................................... 2-1 2.1.2 Screw holes ........................................................... 2-1 Motherboard layout ............................................................ 2-2 Before you proceed ............................................................ 2-3 Central Processing Unit (CPU) ........................................... 2-4 2.4.1 Overview ................................................................ 2-4 2.4.2 Installing the CPU .................................................. 2-5 2.4.3 Installing the heatsink and fan ............................... 2-7 2.4.4 Connecting the CPU fan cable .............................. 2-9 System memory ............................................................... 2-10 2.5.1 Overview .............................................................. 2-10 2.5.2 Memory configurations .........................................2-11 2.2 2.3 2.4 2.5 iii Contents Safeguards 2.6 2.7 2.8 2.5.3 Installing a DIMM ..................................................2-11 2.5.4 Removing a DIMM ............................................... 2-12 Expansion slots ................................................................ 2-13 2.6.1 Installing an expansion card ................................ 2-13 2.6.2 Configuring an expansion card ............................ 2-13 2.6.3 PCI slots .............................................................. 2-15 2.6.4 AGP slot ............................................................... 2-15 Switches and jumpers ...................................................... 2-16 Connectors ....................................................................... 2-20 Chapter 3: Powering up 3.1 3.2 Starting up for the first time ................................................ 3-1 Powering off the computer ................................................. 3-2 Chapter 4: BIOS setup 4.1 Managing and updating your BIOS .................................... 4-1 4.1.1 Using ASUS EZ Flash to update the BIOS ............ 4-1 4.1.2 Using AFLASH to update the BIOS ....................... 4-3 BIOS Setup program .......................................................... 4-7 4.2.1 BIOS menu bar ...................................................... 4-8 4.2.2 Legend bar ............................................................. 4-8 Main Menu ........................................................................ 4-10 4.3.1 Primary and Secondary Master/Slave ................. 4-12 4.3.2 Keyboard Features .............................................. 4-16 Advanced Menu ............................................................... 4-17 4.4.1 Chip Configuration ............................................... 4-19 4.4.2 I/O Device Configuration ...................................... 4-22 4.4.3 PCI Configuration ................................................ 4-24 Power Menu ..................................................................... 4-26 4.5.1 Power Up Control ................................................ 4-28 4.5.2 Hardware Monitor ................................................ 4-30 Boot Menu ........................................................................ 4-32 Exit Menu ......................................................................... 4-34 4.2 4.3 4.4 4.5 4.6 4.7 iv Contents Chapter 5: Software support 5.1 5.2 Install an operating system ................................................. 5-1 Support CD information ...................................................... 5-1 5.2.1 Running the support CD ........................................ 5-1 5.2.2 Main menu ............................................................. 5-2 5.2.3 Software menu ....................................................... 5-3 5.2.4 Drivers menu ......................................................... 5-5 5.2.5 DOS Utilities menu ................................................ 5-6 5.2.6 ASUS Contact Information ..................................... 5-6 5.2.7 Other information ................................................... 5-7 Software information .......................................................... 5-9 5.3.1 ASUS Update ........................................................ 5-9 5.3.2 ASUS PC Probe ...................................................5-11 5.3.3 E-Color 3Deep ..................................................... 5-16 5.3 Glossary ................................................................................ G-1 Index ........................................................................................ I-1 v FCC/CDC statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: · This device may not cause harmful interference, and · This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. vi Safety information Electrical safety · To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. · When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. · Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. · Seek professional assistance before using an adpater or extension cord. These devices could interrupt the grounding circuit. · Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. · If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. Operation safety · Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. · Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. · To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry. · Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet. · Place the product on a stable surface. · If you encounter technical problems with the product, contact a qualified service technician or your retailer. vii About this guide This user guide contains the information you need when installing the ASUS P4B533-VM motherboard. How this guide is organized This manual contains the following parts: · Chapter 1: Product introduction This chapter describes the features of the P4B533-VM motherboard. It includes brief descriptions of the special attributes of the motherboard and the new technology it supports. · Chapter 2: Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the switches, jumpers, and connectors on the motherboard. · Chapter 3: Powering up This chapter describes the power up sequence and gives information on the BIOS beep codes. · Chapter 4: BIOS setup This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. · Chapter 5: Software support This chapter describes the contents of the support CD that comes with the motherboard package. · Glossary This part defines the technical terms that you may encounter when reading this document. · Index This part contains an alphabetical list of the topics found in this document. viii Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS Websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. The ASUS websites are listed in the ASUS Contact Information on page x. 2. Optional Documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package. ix ASUS contact information ASUSTeK COMPUTER INC. (Asia-Pacific) Address: General Tel: General Fax: General Email: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 +886-2-2894-3447 +886-2-2894-3449 info@asus.com.tw Technical Support MB/Others (Tel): Notebook (Tel): Desktop/Server (Tel): Support Fax: Support Email: Web Site: Newsgroup: +886-2-2890-7121 (English) +886-2-2890-7122 (English) +886-2-2890-7123 (English) +886-2-2890-7698 tsd@asus.com.tw www.asus.com.tw cscnews.asus.com.tw ASUS COMPUTER INTERNATIONAL (America) Address: General Fax: General Email: 6737 Mowry Avenue, Mowry Business Center, Building 2, Newark, CA 94560, USA +1-510-608-4555 tmd1@asus.com Technical Support Support Fax: General Support: Notebook Support: Web Site: Support Email: +1-510-608-4555 +1-502-995-0883 +1-877-918-ASUS (2787) www.asus.com tsd@asus.com ASUS COMPUTER GmbH (Europe) Address: General Fax: General Email: Harkortstr. 25, 40880 Ratingen, BRD, Germany +49-2102-442066 sales@asuscom.de (for marketing requests only) Technical Support Support Hotline: Notebook (Tel): Support Fax: Support (Email): Web Site: MB/Others: +49-2102-9599-0 +49-2102-9599-10 +49-2102-9599-11 www.asuscom.de/de/support (for online support) www.asuscom.de x P4B533-VM specifications summary CPU Chipset Front Side Bus (FSB) Memory Expansion slots IDE Audio (optional) Special features Socket 478 for Intel® Pentium® 4 On-die 512KB L2 cache Intel 82845G MCH Intel 82801 ICH4 533/400 MHz 2 x 184-pin DDR DIMM sockets for up to 2GB memory Supports PC2100/1600 unbuffered non-ECC DDR DIMMs 1 x AGP 4X (1.5V only) 3 x PCI 2 x UltraDMA 100/66/33 Realtek ALC650 6-channel audio CODEC ASUS JumperFreeTM mode ASUS Q-Fan ASUS EZ Flash Power Loss Restart AGP warning LED 1 x Parallel port 1 x Serial port 1 x PS/2 keyboard port 1 x PS/2 mouse port 4 x USB 2.0/USB 1.1 ports Line In/Line Out/Microphone ports (optional) 1 x USB 2.0/1.1 connector for 2 additional USB ports CPU/Chassis fan connectors 20-pin/4-pin ATX power connectors IDE LED/Power LED connectors Chassis intrusion and SIR connectors GAME/MIDI connector S/PDIF Out connector CD/AUX audio connectors (optional) Front panel audio connector (optional) 2Mb Flash ROM, Award BIOS, TCAV, PnP, DMI2.0, WfM2.0, SM BIOS2.3, ASUS EZ Flash PCI 2.2, USB 2.0 WfM 2.0. DMI 2.0, chassis intrusion Rear panel I/O Internal I/O BIOS features Industry standard Manageability (continued on the next page) xi P4B533-VM specifications summary Form Factor Support CD contents ATX form factor: 9.6 in x 8.6 in (24.5 cm x 21.9 cm) Device drivers ASUS PC Probe ASUS LiveUpdate Trend MicroTM PC-cillin 2002 anti-virus software CyberLink Power Player SE, VideoLive Mail xii Chapter 1 This chapter describes the features of the P4B533-VM motherboard. It includes brief explanations of the special attributes of the motherboard and the new technology it supports. Product introduction Chapter summary 1.1 1.2 1.3 1.4 Welcome! ........................................................ 1-1 Package contents .......................................... 1-1 Special features ............................................. 1-2 Motherboard overview ................................... 1-6 ASUS P4B533-VM motherboard 1.1 Welcome! Thank you for buying the ASUS® P4B533-VM motherboard! The ASUS P4B533-VM motherboard delivers a host of new features and latest technologies making it another standout in the long line of ASUS quality motherboards! The P4B533-VM incorporates the Intel® Pentium® 4 Processor in 478-pin package coupled with the Intel® 845G (Brookdale-G) chipset to set a new benchmark for an effective desktop platform solution. Supporting up to 2GB of system memory with PC2100/1600 DDR SDRAM, high-resolution graphics via an AGP 4X slot, USB 2.0 capability, high-speed data transfers using the ATA100 protocol, and 6-channel audio features, the P4B533-VM is your perfect vehicle to get ahead in the world of power computing! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents ASUS P4B533-VM motherboard micro-ATX form factor: 9.6 in x 8.6 in (24.4 cm x 21.9 cm) ASUS P4B533-VM series support CD ASUS USB 2.0/GAME module 80-conductor ribbon cable for UltraDMA/100/66/33 IDE drives Ribbon cable for a 3.5-inch floppy drive Bag of extra jumper caps User Guide If any of the above items is damaged or missing, contact your retailer. Check your P4B533-VM package for the following items. ASUS P4B533-VM motherboard user guide 1-1 1.3 Special features 1.3.1 Product highlights Latest processor technology The P4B533-VM motherboard supports the latest Intel® Pentium® 4 Processor via a 478-pin surface mount ZIF socket. The Pentium 4 processor with 512KB L2 cache on 0.13 micron process features the Intel® NetBurstTM microarchitecture that includes hyper-pipelined technology, a rapid execution engine, a 533MHz system bus, and an execution trace cache to offer a significant increase in performance. See page 2-4 for more information. DDR memory support Employing the Double Data Rate (DDR) memory technology, the P4B533-VM motherboard supports up to 2GB of system memory using PC2100/1600 DDR DIMMs. The ultra-fast 266MHz memory bus doubles the speed of the PC133 SDRAM to deliver the required bandwidth for the latest 3D graphics, multimedia, and Internet applications. See page 2-10. USB 2.0 technology The motherboard implements the new Universal Serial Bus (USB) 2.0 specification, extending the connection speed from 12 Mbps on USB 1.1 to a fast 480 Mbps on USB 2.0. The higher bandwidth of USB 2.0 allows connection of devices such as high resolution video conferencing cameras, next generation scanners and printers, and fast storage units. USB 2.0 is backward compatible with USB 1.1. See page 2-24. NOTICE: The Microsoft USB 2.0 driver has not been officially released as of the support CD production date. Please download the USB 2.0 driver from the Microsoft website (www.microsoft.com) to upgrade your USB 1.1 ports to USB 2.0. 6-channel digital audio (on audio models only) A Realtek ALC650 audio CODEC and an S/PDIF Out interface are onboard to support AC `97 2.2 specifications and allow digital connections with DVD systems and other audio/video devices. See page 2-25. ASUS Q-Fan feature The ASUS Q-Fan technology smartly adjusts the fan speeds according to the system loading to ensure quiet, cool, and efficient operation. 1-2 Chapter 1: Product introduction 1.3.2 Value-added solutions ASUS JumperFreeTM mode · adjustable CPU frequency multiple in BIOS using the ASUS JumperFreeTM solution · adjustable FSB frequency ratio Concurrent PCI This feature allows multiple PCI transfers from PCI master buses to the memory and processor. Temperature, fan, and voltage monitoring The CPU temperature is monitored by the ASUS ASIC through the CPU's internal diode to prevent overheating and damage. The system fan rotations per minute (RPM) is monitored for timely failure detection. The system voltage levels are monitored to ensure stable supply of current for critical components. Dual function power switch While the system is ON, pressing the power switch for less than 4 seconds puts the system to sleep mode or to soft-off mode, depending on the BIOS setting. Pressing the power switch for more than 4 seconds lets the system enter the soft-off mode regardless of the BIOS setting. ACPI ready The Advanced Configuration power Interface (ACPI) provides more energy saving features for operating systems that support OS Direct Power Management (OSPM). Auto fan off The system fans power off automatically when the system is in sleep mode. This feature reduces both power consumption and system noise. Chassis intrusion detection The motherboard supports chassis intrusion monitoring through the ASUS ASIC. A chassis intrusion event is retained in the system memory for more protection. ASUS P4B533-VM motherboard user guide 1-3 1.4 Motherboard overview Before you install the P4B533-VM motherboard, familiarize yourself with its physical configuration and available features to facilitate the motherboard installation and future upgrades. A sufficient knowledge of the motherboard specifications will also help you avoid mistakes that may damage the board and its components. 1.4.1 Major components The following are the major components of the P4B533-VM motherboard as pointed out in the picture on page 1-5. 1. 2. 3. 4. 5. 6. 7. 8. 9. 11. DIP switches ATX 12V connector CPU socket North Bridge controller DDR DIMM sockets ATX power connector Super I/O controller Floppy connector IDE connectors South Bridge controller 19. PS/2 mouse port 20. Parallel port 21. RJ-45 port (optional) 22. Line In jack (optional) 23. Line Out jack (optional) 24. Microphone jack (optional) 25. USB 2.0 ports 1 and 2 26. Video port 27. Serial port 28. USB 2.0 ports 3 and 4 29. Keyboard port 10. Flash EEPROM 12. ASUS ASIC 13. AGP slot 14. Standby power LED 15. Audio CODEC (optional) 16. PCI slots 17. AGP warning LED 18. LAN PHY (optional) See page 1-6 for the specifications of each component. Refer to Chapter 2 for detailed information on the components. 1-4 Chapter 1: Product introduction 1 2 3 4 5 67 8 9 18 17 16 15 10 11 12 14 13 19 20 21 22 23 24 29 28 27 26 25 ASUS P4B533-VM motherboard user guide 1-5 1.4.2 Core specifications 1 2 3 DIP switches. This 5-switch Dual Inline Package (DIP) allows you to set the CPU external frequency. ATX 12V connector. This power connector is for the 4-pin 12V plug from an ATX 12V power supply. CPU socket. A 478-pin surface mount, Zero Insertion Force (ZIF) socket for the Intel® Pentium® 4 Processor, with 533/400 MHz system bus that allows 4.3GB/s and 3.2GB/s data transfer rates. North bridge controller. The Intel® 845G Graphics Memory Controller Hub (GMCH) provides the processor interface with 533/400 MHz frequency, system memory interface at 133/100MHz operation, and 1.5V AGP interface that supports AGP 2.0 specification including 4X/2X Fast Write protocol. The integrated graphics accelerator delivers 3D/2D video capabilities and a high bandwidth access to graphics data in the system memory at a 2.2GB/s or 1.6GB/s. The GMCH interconnects to the south bridge ICH4 via the Intel® proprietary Hub Interface. DDR DIMM sockets. These two 184-pin DIMM sockets support up to 2GB using unbuffered non-ECC PC2100/1600 DDR DIMMs. ATX power connector. This 20-pin connector connects to an ATX +12V power supply. The power supply must have at least 1A on the +5V standby lead (+5VSB). Super I/O controller. This Low Pin Count (LPC) interface provides the commonly used Super I/O functionality. The chipset supports a high-performance floppy disk controller for a 360K/720K/1.44M/ 2.88M floppy disk drive, a multi-mode parallel port, two standard compatible UARTs, a Standard Infrared (SIR), one MPU-401 UART mode compatible MIDI/game interface, and a Smart Card Reader interface. Floppy disk connector. This connector accommodates the provided ribbon cable for the floppy disk drive. One side of the connector is slotted to prevent incorrect insertion of the floppy disk cable. IDE connectors. These dual-channel bus master IDE connectors support up to four Ultra DMA/100/66, PIO Modes 3 & 4 IDE devices. Both the primary (blue) and secondary (black) connectors are slotted to prevent incorrect insertion of the IDE ribbon cable. 4 5 6 7 8 9 1-6 Chapter 1: Product introduction