User manual ASUS P4SE-U2

P4SE/U2 User Guide Motherboard E1171 Checklist First Edition November 2002 Copyright © 2002 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents Contents ......................................................................................... iii FCC/CDC statements ...................................................................... v Federal Communications Commission Statement ................. v Canadian Department of Communications Statement ........... v Safety information .......................................................................... vi About this guide ............................................................................. vii Conventions used in this guide ............................................ vii Where to find more information ............................................ vii ASUS contact information ............................................................ viii Specifications summary ................................................................. ix Chapter 1 - Motherboard Info ................................................... 1-1 1.1 Welcome ...................................................................... 1-2 1.2 Package contents ....................................................... 1-2 1.3 Motherboard components .......................................... 1-3 1.4 Motherboard layout..................................................... 1-6 1.5 Before you proceed..................................................... 1-7 1.6 Central Processing Unit (CPU)................................... 1-7 1.7 System memory........................................................... 1-8 1.8 Expansion Slots........................................................... 1-8 1.8.1 Configuring an expansion card .................................. 1-9 1.8.2 Standard Interrupt Assignments ................................ 1-9 1.8.3 AGP Slot ........................................................ 1-9 1.9 Jumpers ....................................................................... 1-10 1.10 Connectors ................................................................. 1-13 Chapter 2 - BIOS Information ..................................................... 2.1 Managing and updating your BIOS ............................ 2.1.1 Using ASUS EZFLASH to update the BIOS................ 2.1.2 Using ASUS AFLASH to update the BIOS................... Updating BIOS procedures.................................... 2.2 BIOS Setup Program ................................................... 2.2.1 BIOS menu bar ........................................................... 2.2.2 Legend bar .................................................................. .2-1 2-2 2-2 2-4 2-5 2-7 2-7 2-8 iii Features Contents Safeguards 2.3 Main Menu .................................................................... 2-9 2.3.1 Primary and Secondary Master/Slave......................... 2-11 2.3.2 Keyboard Features ..................................................... 2-13 2.4 Advanced Menu ........................................................... 2-14 2.4.1 Chip Configuration ...................................................... 2-15 2.4.2 I/O Device Configuration ............................................. 2-17 2.4.3 PCI Configuration ........................................................ 2-18 2.4.3.1 PCI IRQ Resource Exclusion ................................... 2-19 2.5 Power Menu .................................................................. 2-20 2.5.1 Power-up Control ........................................................ 2-22 2.5.2 Hardware Monitor ........................................................ 2-23 2.6 Boot Menu ..................................................................... 2-24 2.7 Exit Menu ................................................................. 2-25 Chapter 3 - Starting Up .............................................................. 3.1 Install an operating system......................................... 3.2 Support CD information.............................................. 3.2.1 Running the support CD ............................................ 3.2.2 Software drivers and installation menus .................... 3.3 Software Information................................................... 3.3.1 ASUS Update ............................................................. 3.3.2 ASUS PC Probe ......................................................... Starting ASUS PC Probe ...................................... Using ASUS PC Probe ......................................... ASUS PC Probe Task Bar Icon ............................... 3-1 3-2 3-2 3-2 3-3 3-5 3-5 3-6 3-6 3-7 3-9 iv FCC/CDC statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: · This device may not cause harmful interference, and · This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. v Safety information Electrical safety · To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. · When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. · Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. · Seek professional assistance before using an adpater or extension cord. These devices could interrupt the grounding circuit. · Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. · If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. Operation safety · Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. · Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. · To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry. · Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet. · Place the product on a stable surface. · If you encounter technical problems with the product, contact a qualified service technician or your retailer. vi Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING/DANGER: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS Websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. The ASUS websites are listed in the ASUS Contact Information on page viii. 2. Optional Documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package. vii ASUS contact information ASUSTeK COMPUTER INC. (Asia-Pacific) Address: General Tel: General Fax: General Email: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 +886-2-2894-3447 +886-2-2894-3449 info@asus.com.tw Technical Support MB/Others (Tel): Notebook (Tel): Desktop/Server (Tel): Support Fax: Support Email: Web Site: Newsgroup: +886-2-2890-7121 (English) +886-2-2890-7122 (English) +886-2-2890-7123 (English) +886-2-2890-7698 tsd@asus.com.tw www.asus.com.tw cscnews.asus.com.tw ASUS COMPUTER INTERNATIONAL (America) Address: General Fax: General Email: 6737 Mowry Avenue, Mowry Business Center, Building 2, Newark, CA 94560, USA +1-510-608-4555 tmd1@asus.com Technical Support Support Fax: General Support: Web Site: Support Email: +1-510-608-4555 +1-502-933-8713 www.asus.com tsd@asus.com ASUS COMPUTER GmbH (Germany and Austria) Address: General Fax: General Email: Harkortstr. 25, 40880 Ratingen, BRD, Germany +49-2102-442066 sales@asuscom.de (for marketing requests only) Technical Support Support Hotline: Notebook (Tel): Support Fax: Support (Email): Web Site: MB/Others: +49-2102-9599-0 +49-2102-9599-10 +49-2102-9599-11 www.asuscom.de/de/support (for online support) www.asuscom.de viii P4SE/U2 specifications summary CPU Chipset Front Side Bus (FSB) Memory Socket 478 for Intel Pentium 4/Celeron Northwood/ Willamette processors with frequency up to 3.06+ GHz Northbridge: SiS 645 Southbridge: SiS962L 400 MHz 3 x DDR DIMM Sockets supports a maximum of 3 GB unbuffered PC2100/1600 non-ECC DDR DIMMs (Note: PC2700 max. to 4 banks only.) 1 x AGP 4X 6 x PCI 2 x UltraDMA 133/100/66 C-Media 4-channel CODEC SiS 962L integrated 10/100 Mbps Fast Ethernet with Realtek external PHY ASUS C.P.R. (CPU Parameter Recall) ASUS EZ Flash ASUS MyLogo for customized boot logos ASUS Jumperfree ASUS CrashFree BIOS SFS (Stepless Frequency Selection) Suspend-to-RAM 1 x Parallel 2 x Serial 1 x PS/2 Keyboard 1 x PS/2 Mouse 2 x USB 2.0 1 x Audio I/O, Game/MIDI(on audio model only) 1 x RJ-45 Port (on LAN model only) CPU/Chassis FAN connector 20-pin ATX power connector 4-pin ATX 12V power connector Chassis intrusion IDE LED CD/AUX audio in (on audio model only) ASUS front panel audio connector (on audio model only) 2 x USB Headers support additional 4 USB 2.0 ports (continued on the next page) Expansion slots IDE Audio (optional) LAN (optional) Special Features Back Panel I/O Ports Internal I/O Connectors ix P4SE/U2 specifications summary BIOS features 2Mb Flash EEPROM, ASUS JumperFree, ASUS MyLogo, Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green, TCAV (Trend Chip Away Virus) PCI 2.2, USB 2.0 WfM2.0, DMI2.0, WOR, WOL, Chassis Intrusion ATX form factor: 12 in x 8.6 in (30.5 cm x 21.9 cm) Device drivers ASUS PC Probe Trend Microtm PC-cillin 2002 anti-virus software ASUS LiveUpdate Utility User's manual Support CD 1 x UltraDMA 133/100/66 cable FDD cable I/O Shield Industry standard Manageability Form Factor Support CD contents Accessories * Specifications are subject to change without notice. x Chapter 1 ASUS P4SE/U2 Motherboard Motherboard Info 1-1 This chapter gives information about the ASUS P4SE/U2 motherboard that came with the system.This chapter includes the motherboard layout, jumper settings, and connector locations. 1.1 Welcome! Thank you for buying the ASUS® P4SE/U2 motherboard! The ASUS P4SE/U2 motherboard is loaded with the most advanced technologies to deliver the maximum performance for Pentium® 4 processors. This motherboard is loaded with value-added features for guaranteed consumer satisfaction. Unique ASUS features such as ASUS C.P.R. (CPU Parameter Recall), ASUS EZ Flash, ASUS MyLogo and more are included to ensure the best user experience and value in a motherboard. For future upgrades or system reconfiguration, this chapter provides technical information about the motherboard. Before you start installing the motherboard and hardware devices on it, check the items in your package with the list below. 1.2 Package contents ASUS P4SE/U2 motherboard ATX form factor: 12 in x 8.6 in ASUS P4SE/U2 series support CD 1 pc. 80-conductor ribbon cable for UltraDMA/66/100/133 IDE drives Ribbon cable for a 3.5-inch floppy drive Bag of extra jumper caps User Manual I/O shield Check your ASUS P4SE/U2 package for the following items. 1-2 1.3 Motherboard components 1 2 3 4 5 6 7 8 16 15 14 13 17 18 12 19 11 10 9 20 26 25 24 23 22 21 1-3 ASUS P4SE/U2 Motherboard 1 2 ATX 12V connector. This power connector connects the 4-pin 12V plug from the ATX 12V power supply. CPU Sockets. A 478-pin surface mount, Zero Insertion Force (ZIF) socket for the Intel® Pentium® 4 478/Northwood Processor with 400 MHz system bus that allows 3.2 GB/s data transfer rates respectively. ATX power connector. This standard 20-pin connector connects to an ATX 12V power supply. The power supply must have at least 1A on the +5V standby lead (+5VSB). DDR DIMM Sockets. These three 184-pin DIMM sockets support up to 3GB using non-ECC PC2100/1600 DDR SDRAM DIMMs. (Note: PC 2700 max. to 4 banks only.) Floppy Disk connector. This connector connects the provided ribbon cable for the floppy disk drive. One side of the connector is slotted to prevent incorrect insertion of the floppy disk cable. Northbridge Controller. This SiS 645 controller integrates a high performance host interface for the Intel® Pentium® 4 processor, a memory controller and an integrated graphics interface. IDE Connectors. These dual-channel bus master IDE connectors support up to four Ultra DMA133/100/66, PIO Modes 3 & 4 IDE devices. Both the primary(blue) and secondary(black) connectors are slotted to prevent incorrect insertion of the IDE ribbon cable. AGP slot. This Accelerated Graphics Port (AGP) slot supports AGP4x mode graphic cards for 3D graphical applications. ASUS ASIC. This chip performs multile system functions that include hardware and system voltage monitoring. South bridge controller. This SiS 962L controller integrates the AC'97 Interface, Universal Serial Bus 2.0 Host controllers, two IDE Master/Slave controllers. Super I/O chipset. This interface provides the commonly used Super I/O functionality. The chipset supports a high-performance floppy disk controller for a 360K/720K/1.44M/2.88M floppy disk drive, a PS/2 keyboard and mouse port, a multi-mode parallel port, a game port and, a serial port. 3 4 5 6 7 8 9 10 11 1-4 Chapter 1: Motherboard Information 12 Standby power LED. This green LED lights up if there is a standby power on the motherboard. The LED acts as a reminder to turn off the system power before plugging or unplugging devices. Flash ROM. This 2Mb firmware contains the programmable BIOS program. Audio CODEC. The CMedia 4-channel CODEC is an AC'97 compliant audio CODEC designed for PC multimedia systems. (on audio models only) PCI slots. These 32-bit PCI 2.2 expansion slots support bus master PCI cards like SCSI and LAN cards with 133MB/s maximum output. LAN PHY. This SiS 962L integrated 10/100 Mbps Fast Ethernet with Realtek external PHY supports your local area networking needs. PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse. RJ-45 port. This port allows connection to a Local Area Network (LAN) through a network hub. (on LAN models only) Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. GAME/MIDI port. This connector supports a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files. Microphone jack. This Mic (pink) jack connects a microphone. Line In jack. This Line In (light blue) jack connects a tape player or other audio sources. Line Out jack. This Line Out (lime) jack connects a headphone or a speaker. Serial ports. These ports connect to your serial mouse and other serial devices. USB ports. These two 4-pin Universal Serial Bus 2.0 (USB 2.0) ports are available for connecting USB devices such as a mouse and PDA. PS/2 keyboard port. This purple 6-pin connector is for a PS/2 keyboard. 13 14 15 16 17 18 19 20 21 22 23 24 25 26 ASUS P4SE/U2 Motherboard 1-5 1.4 PS/2KBMS T: Mouse B: Keyboard Motherboard layout 21.9cm (8.6in) ATX Power Connector USB2.0 Top: T: USB4 RJ-45 B: USB3 COM1 KBPWR1 USBV1 Socket 478 DDR DIMM1 (64/72 bit, 184-pin module) DDR DIMM2 (64/72 bit, 184-pin module) DDR DIMM3 (64/72 bit, 184-pin module) PARALLEL PORT ATX12V1 COM2 CPUFAN1 GAME_AUDIO Line Out Line In Mic In SECONDARY IDE AUX1 REALTEK 01 23 45 Accelerated Graphics Port AGP PHY PCI1 CD1 SiS962L MuTLOL Media I/O CR2032 3V Lithium Cell CMOS Power CLRCMOS1 ALOUT1 IAPANEL1 PCI2 PCI3 P4SE/U2 CHASSIS1 CHASFAN1 ® C-Media 4CH PCI4 LED1 PCI5 2Mbit Firmware Hub ASUS ASIC with Hardware Monitor PCI6 USBV2 USBV3 USB3 USB2 Super I/O IDELED1 PANEL1 The audio and LAN features are optional. These components are grayed out in the above motherboard layout. 1-6 Chapter 1: Motherboard Information 30.5cm (12.0in) PRIMARY IDE SiS645 HOST/ Memory Controller FLOPPY1 1.5 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. Use a grounded wrist strap or touch a safely grounded object or to a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. Hold components by the edges to avoid touching the ICs on them. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 2. 3. 4. 5. 1.6 Central Processing Unit (CPU) The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) socket. This socket is specifically designed for the Intel® Pentium® 4 processors. P4SE/U2 ® Gold Arrow P4SE/U2 Socket 478 ASUS P4SE/U2 Motherboard 1-7 1.7 System memory The motherboard has three Double Data Rate (DDR) DIMM sockets that supports up to 3GB non-ECC PC2100/1600 DDR. (Note: PC2700 max. to 4 banks only.) 104 Pins P4SE/U2 ® 80 Pins P4SE/U2 184-Pin DDR DIMM Sockets 1. Make sure the memory frequency and bus frequency setting in the BIOS are the same or set to [Auto] for optimum system performance. 2. A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM. 3. Visit ASUS website (www.asus.com) for latest DDR333 Qualified Vendor List. 1.8 1.8.1 Expansion slots Configuring an expansion card The P4SE/U2 motherboard has six (6) expansion slots. The following sub-sections describe the slots and the expansion cards that they support. After physically installing the expansion card, configure the card by adjusting the software settings. 1. 2. 3. Turn on the system and change the necessary BIOS settings, if any. Assign an IRQ to the card. Refer to the tables below. Install the software drivers for the expansion card. 1-8 Chapter 1: Motherboard Information 1.8.2 IRQ 0 1 2 3* 4* 5* 6 7* 8 9* 10* 11* 12* 13 14* 15* Standard Interrupt Assignments Standard Function System Timer Keyboard Controller Programmable Interrupt Controller USB Universal Host Controller Communications Port (COM1) Onboard Audio Standard Floppy Disk Controller Printer Port (LPT1) System CMOS/Real Time Clock Onboard LAN USB Universal Host Controller Onboard VGA PS/2 Compatible Mouse Port Numeric Data Processor Ultra ATA Controller Secondary Ultra ATA Controller *These IRQs are usually available for ISA or PCI devices. IRQ assignments for this motherboard A B C D E PCI slot 1 shared -- -- -- -- PCI slot 2 -- shared -- -- -- PCI slot 3 -- -- shared -- -- PCI slot 4 -- -- -- shared -- PCI slot 5 shared -- -- -- -- PCI slot 6 -- shared -- -- -- Onboard USB 1.1 controller CHC0 -- -- -- -- used Onboard USB 1.1 controller CHC1 -- -- -- -- -- Onboard USB 1.1 controller CHC2 -- -- -- -- -- Onboard USB 2.0 controller EHC3 -- -- -- -- -- Onboard LAN -- -- -- shared -- Onboard Audio -- -- shared -- -- F -- -- -- -- -- -- -- used -- -- -- -- G -- -- -- -- -- -- -- -- used -- -- -- H -- -- -- -- -- -- -- -- -- used -- -- 1.8.3 AGP slot This motherboard has an Accelerated Graphics Port (AGP) slot that supports AGP 4X cards. Note the notches on the card golden fingers to ensure that they fit the AGP slot on your motherboard. P4SE/U2 ® P4SE/U2 Accelerated Graphics Port (AGP) ASUS P4SE/U2 Motherboard 1-9 1.9 Jumpers This section describes and illustrates the jumpers on the motherboard. 1. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default value is [Disabled]). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS (see section 2.5.1 Power Up Control). KBPWR1 2 1 +5V P4SE/U2 ® 3 2 +5VSB (Default) P4SE/U2 Keyboard Power Setting 2. Clear RTC RAM (CLRCMOS1) These jumpers allow you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS is powered by the onboard button cell battery. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the battery. 3. Short the jumper by replacing the jumper cap and removing it after 3 secs. 4. Re-install the battery. 5. Plug the power cord and turn ON the computer. 6. Hold down the key during the boot process and enter BIOS setup to re-enter data. CLRCMOS1 2 1 P4SE/U2 ® 3 2 Clear CMOS Normal (Default) P4SE/U2 Clear RTC RAM 1-10 Chapter 1: Motherboard Information