91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page II USER'S MANUAL Part 2 2.4 GHz Cordless Telephone with Caller ID/Call Waiting 1440 Please also read Part 1 -- Important Product Information © 2002 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page III Visit us at www.telephones.att.com © 2002 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&TCorp., licensed to Advanced American Telephones. Printed in China. Issue 1AT&T 12/02 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page IV CONTENTS Parts List . . . . . . . . . . . . . . . . . . 1 Choose a Location for Your Phone . . . . . . . . . . . . . . . . . . 2 About Caller Identification . . . . . . 2 BEFORE YOU BEGIN . . . . . . . . 1 BATTERIES . . . . . . . . . . . . . . 28 Charge the Handset Battery Pack . . . . . . . . . . . . . .28 Replace the Handset Battery Pack . . . . . . . . . . . . . 29 INSTALLATION . . . . . . . . . . . . 3 Before You Install . . . . . . . . . . . . 3 Table/Desk Installation . . . . . . . . 4 Wall Installation . . . . . . . . . . . . . 6 Make a Call . . . . . . . . . . . . . . . . 7 Answer a Call . . . . . . . . . . . . . . 7 End a Call . . . . . . . . . . . . . . . . . 7 Change Channel . . . . . . . . . . . . . 7 Redial . . . . . . . . . . . . . . . . . . . . 7 Handset Volume . . . . . . . . . . . . . 7 Flash/Call Waiting . . . . . . . . . . . . 7 Hold . . . . . . . . . . . . . . . . . . . . . 7 Page/Handset Locator . . . . . . . . 8 Handset Ringer Style/ Battery Save . . . . . . . . . . . . . . 9 Temporary Tone Dialing . . . . . . .9 Headset Jack . . . . . . . . . . . . . . .10 Operating Range . . . . . . . . . . . . 10 Store a Number/Name in Memory . . . . . . . . . . . . Edit a Number/Name Stored in Memory . . . . . . . . . . . . Delete a Number/Name Stored in Memory . . . . . . . . . . . . Dial a Memory Number . . . . . Store a Number/Name in the Directory . . . . . . . . . . . Edit a Number/Name Stored in the Directory . . . . . . . . . Delete a Number/Name Stored in the Directory . . . . . . . . . Dial a Number from the Directory . . . . . . . . . . . About Call History . . . . . . . . Review Call History . . . . . . . . Turn Off Base NEW CALL Indicator . . . . . Delete Records from Call History . . . . . . . . . . . . Dial a Displayed Number . . . Store a Call History Record in the Directory . . . . . . . . . Display Screen Messages . . . . TELEPHONE OPERATION . . . . . . 7 IN CASE OF DIFFICULTY . . . . . 30 DEFAULT SETTINGS . . . . . . . . 34 TECHNICAL SPECIFICATIONS . . 35 INDEX . . . . . . . . . . . . . . . . . 36 TELEPHONE MEMORY . . . . . . 11 . . 11 . . 14 . . 15 . . 16 TELEPHONE DIRECTORY . . . . . 17 . . 17 . . 19 . . 20 . . 21 . . 22 . . 23 CALLER ID OPERATION . . . . . . 22 . . 23 . . 24 . . 25 . . 26 . . 27 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 1 BEFORE YOU BEGIN Parts List Your box should include: This User's Manual Base unit Wall Bracket Handset NiCd battery pack Power adapter 2 Telephone line cords 1 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 2 Choose a Location for Your Phone For best reception quality, choose a location for the base unit of your new telephone: · Away from microwave ovens · Away from TVs, VCRs, stereo equipment and computers (Cordless telephones operate at a radio frequency that may cause interference with these types of equipment.) · Away from extreme heat or cold (For example: radiators, direct sunlight, air ducts, air conditioning and open windows) · Away from other cordless telephones (Note: 2.4 GHz Digital Spread Spectrum Telephones may cause interference with this telephone.) · Away from metal walls or cabinets, and · Near an electrical outlet not controlled by a wall switch. About Caller Identification (Caller ID) This product has a Caller ID with Call Waiting feature that works with service from your local phone service provider. Caller ID with Call Waiting lets you see who's calling before you answer the phone, even when you're on another call. You may need to change your phone service to use this feature. Contact your phone service provider if: · You have both Caller ID and Call Waiting, but as separate services (you may need combined service) · You have only Caller ID service, or only Call Waiting service · You don't subscribe to any Caller ID or Call Waiting services. You can use this product with regular Caller ID service,and you can use this product's other features without subscribing to either Caller ID or combined Caller ID with Call Waiting service. There are fees for Caller ID services, and they may not be available in all areas. This product can provide information only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment. 2 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 3 INSTALLATION Before You Install 1 Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch. Install the handset battery. Use only the following AT&T Batteries 3301, SKU#91076. 2 a) Remove battery compartment cover by pressing on the indentation and sliding downward. c) Place battery pack in compartment with the wires in the lower left corner, along the bottom of the battery pack. b) Align two holes in plug with socket pins, and snap the plug into place. d) Replace cover by sliding it up into place. 3 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 4 3 Attach belt clip to the cordless handset (optional). To attach To remove NOTE: base unit electronic equipment ¥such as Install thecomputers, away fromsets or microwave ovens. personal television Avoid excessive heat, cold, dust or moisture. Table/Desk Installation Standard electrical outlet Modular telephone jack 1 Connect the telephone line cord. Connect the power cord. 2 4 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 5 3 4 5 6 Charge the handset battery. Place the handset in the base. Charge the battery for at least 12 hours the first time. Check for dial tone. After the batteries are charged, pick up the handset and press ; you should hear a dial tone. Set the dial mode. If you have touch tone service, the phone is ready to use as soon as the batteries are charged. If you have dial pulse (rotary) service, you'll need to change the dial mode. · Press on the handset to enter programming mode. · Press or until the screen displays and the currently selected mode. · Press . The current setting blinks. · Press or to select or . · Press , to save the displayed mode. Set Time and Date. · Press ,then press or until the screen displays: . Press . · The month is flashing. Press or until the screen displays the correct month. Press . · The day is flashing. Press or until the screen displays the correct day. Press . · The hour is flashing. Press or until the screen displays the correct hour. Press . · The minute is flashing. Press or until the screen displays the correct minute. Press . · or is flashing. Press or to choose between and . Press . NOTE: the time manually, or ¥allow it You can choose to setset with incoming Calleryou can to be automatically ID Information. 5 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 6 Wall Installation 1 2 3 Connect the telephone line cord. Connect the power cord. Mount the base on the wall. Standard electrical outlet Modular telephone jack a) Align holes on base with mounting studs on wall jack. b) Pull base down on mounting studs until it locks into place. 4 Follow Steps 3­6 in Table/Desk Installation. 6 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 7 TELEPHONE OPERATION Make a Call Press , then dial the number -- OR -- Dial the number (use to backspace and correct digits),then press to call. Answer a Call Press any key except . End a Call Press -- OR -- Place handset in base. Change Channel Press on a call. to switch to a clearer channel while Redial Press , then press dialed (up to 32 digits). -- OR -- Press , then press dialed.While handset idle,press delete the record. to call last number to call last number twice to Handset Volume While on a call,press or to adjust volume of what you hear.A double beep will be sounded when reach minimum or maximum volume. Flash/Call Waiting 1 2 When you receive a Call Waiting signal,press / to connect to the new call. Press / again to return to the original call. Hold Press to put a call on hold. Press again or to release hold -- OR -- Pick up an extension phone will release hold and return the handset to the idle (on hook) mode. 7 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 8 Page/Handset Locator Press to page the handset for up to 60 seconds. Press again to cancel,or press on handset. If you subscribe to telephone company voice mail with a visual message waiting signal, light flashes when you have voice mail waiting. Flashes when you have unreviewed call information. Flashing: handset is in use or there is an incoming call. On steadily: handset is charging in base. 8 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 9 Handset Ringer Style/Battery Save You can select from four dif ferent handset ringer styles,or turn the ringer off and extend the battery life. 1 Make sure the handset is off. 2 Press to enter programming mode. 3 Press or until the screen displays and the current setting. 4 Press . The current setting is flashing. 5 Press or to select , , , , or . You will hear a sample of each ring. 6 Press to choose the displayed ringer setting. Temporary Tone Dialing If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing . This is useful if you need to send touch tone signals for access to telephone banking or long-distance services. 1 Dial the number. 2 Press . Buttons pressed after this send touch tone signals. 3 After you hang up,the phone automatically returns to dial pulse (rotary) service. 9 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 10 Headset Jack You can use this telephone hands-free when you install any AT&T 2.5 mm headset, purchased separately. Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely. Operating Range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance -- which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright. If you receive a call while you are out of range, the handset might not ring -- or if it does ring,the call might not connect when you press . Move closer to the base,then press to answer the call. If you move out of range during a phone conversation, you might hear noise or interference. To improve reception,move closer to the base. If you move out of range without pressing , your phone will be left "off the hook. To hang up properly, walk back into range, " periodically pressing . 10 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 11 TELEPHONE MEMORY NOTE: Press ¥dial mode. This cordless phone can store 10 telephone numbers with names, each up to 16 digits long in memory locations you assign (0-9). at any time to exit memory This cordless phone can store an additional 40 telephone numbers with names alphabetically in the directory. See TELEPHONE DIRECTORY for instructions. Store a Number/Name in Memory 1 Press . Then press screen displays or until the 2 Press or . The screen displays 3 Press the key (0-9) for the memory location where you're storing this entry. If the selected location is empty, the screen displays NOTE: If the location is not ¥entry is displayed along withempty, the current the choices after pressing key. Press to exit memory dial mode and start again, or follow the instructions to dial, edit or erase the current entry. 4 Using the chart below, enter up to 15 characters for the name you're storing with the number. Use to backspace and make corrections;use to advance and add a space. 11 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 12 Presses Dial Key 1 1 A D G J M P T W 0 * & ' , . # B E H K N Q U X C F I L O R V Y 2 3 4 5 6 S 8 Z 9 7 2 3 4 5 6 5 When you finish entering the name, press or . The screen displays 6 Enter the telephone number. Use to backspace and make a correction. Press to store a pause in the dialing sequence. --OR-- Press to display the last number (up to 16 digits) dialed from this phone. Press or The screen displays to store ...