Instruction Manual System FS-3200 High Performance Loudspeaker Components FS-3200 Manual.indd 1 10/6/04 11:00:02 AM 2 Table of Contents System FS-3200 High Performance Loudspeakers Table of Contents 2 Unpacking the Speakers 2 Attaching the Grilles 3 Individual Component Descriptions System FS-3200 High Performance Loudspeaker Components Thank you for choosing Atlantic Technology products. Your new speaker components are precision-crafted to give you years of enjoyable, troublefree service. This manual covers the Atlantic Technology System FS-3200 speaker components. It will show you how to incorporate these components into your present setup, as well as how to assemble a complete system from them. These systems can be used with all current and past sound formats including Stereo, Dolby Surround®, Pro Logic®, Dolby Digital 5.1®, Dolby Digital EX®, DTS®, DTS ES®, DTS ES Discrete®, DTS Neo:6®, DVD-Audio and SACD Audio. IMPORTANT: Although it may seem like asking for driving directions, please take a few moments to read all of this booklet. It has many helpful tips and ideas on properly setting up and using your system. We promise that if you take the time to read and follow these tips you'll get better system performance and more enjoyment. 3 3 3 5 5 7 7 4 Assembling the Speakers 5 Placement Model FS-3200 LR and FS-3200 C Speakers Acoustic Controls Optional Model 2200 SR Surround Speakers 6 Speaker Placement -- Optional Surround and Subwoofer Speaker Placement and Home Theater Speaker Placement for a 3-Piece System 7 Connecting Your System 8 System Wiring 9 System Setup Surround Effects and Speaker Locations 6.1 and 7.1 Channel Systems 10 Care of Your Speakers 11 Specifications 9 9 9 9 Bass Management Operation of Rear Panel Controls on the FS-3200s Dipole/Bipole Operation of the 2200 SR Speakers Setting Levels Unpacking the Speakers Use care when unpacking the speakers. Remember to keep the original boxes and packing material, in the unlikely event the speakers need servicing, or if you move. Attaching the Grilles The included metal grilles are held to the front of the enclosures with powerful neodymium magnets. There are depressions on the back of the grille that the magnets fit into. Once the speakers are in their final position. Position the grille over the magnets on the baffle. Move them together slowly and when you get close enough, the magnets will draw the grille in and hold it tight. Be careful not to get your fingers caught between the grille and the cabinet. For Future Reference Record the serial number and date of purchase for each speaker here. The serial number is found on the speaker terminal panel on the back of the enclosure. Serial Number Serial Number Serial Number Date of Purchase The contents of this manual are Copyright © 2003 by Atlantic Technology International, Corp., and may not be duplicated or reproduced by any means, whether physical, electronic or otherwise without prior written consent from Atlantic Technology International, Corp. Atlantic Technology and the Atlantic Technology logo are registered trademarks of Atlantic Technology International, Corp. Specifications are those in effect at the time of printing.Atlantic Technology International, Corp. reserves the right to change specifications or designs at any time without notice without obligation to modify existing units. FS-3200 Manual.indd 2 10/6/04 11:00:02 AM Individual Component Descriptions Instruction Manual 3 Individual Component Descriptions Model FS-3200 LR and FS-3200 C Speakers The Model FS-3200LR and FS-3200C Speakers are high-performance 2way systems intended for use with the latest generation of flat screen video displays. The advanced design of these speakers deliver detailed, articulate sound, for a dramatic viewing experience. Each speaker contains two GLH (Graphite Loaded Homopolymer) 4½-inch (115mm) woofers, two GLH 4½-inch Pressure Drivers and an advanced 1" (25mm) ferrofluidcooled, damped soft dome tweeter with a powerful neodymium magnet structure. The drivers are mounted in an acoustically inert, heavily braced MDF enclosure and are magnetically shielded so they may be placed close to any type of video monitor without concern of video interference. For accurate reproduction of a multi-channel soundtrack, the three frontchannel speakers must have the same essential tonal balance. Therefore, using two FS-3200LR speakers and an FS-3200C speaker across your front soundstage for the Left, Center, and Right channels will provide an exceptionally smooth and coherent sonic signature. Figure 1 Acoustic Controls System FS-3200 includes unique acoustic controls to help maximize its performance in your room. These controls are explained in greater detail on page 9. Figure 2 FS-3200 LR FS-3200 C NOTE: Although the speakers in the Atlantic Technology System FS-3200 are acoustically and cosmetically matched to each other for ideal results, they may also be used with other Atlantic Technology components and a wide variety of speakers from other manufacturers with excellent results. Optional Model 2200 SR Surround Speakers The Model 2200 SR Dipole/Bipole Surround Speakers (Figure 3) are intended for use in multi-channel audio/video sound systems as dedicated side or back surround channel speakers. The 2200 SR enclosure has two 4 ½" (115mm) GLH woofers and two of the same high performance soft dome tweeters found in the 2200 front speakers. The surround speakers can be switched between Dipole and Bipole operation. These settings are explained on page 8,"Dipole/Bipole Operation of the SR Speakers." Because of their small size, both the model 920 LR and 1200 LR make an excellent surround speaker. When using either LR as a surround speaker, the best results will be obtained if the speakers do not aim directly at the listening area. Mount the LR's on the side walls, above and slightly behind the listening position (See page 6). Figure 3 2200 SR FS-3200 Manual.indd 3 10/6/04 11:00:03 AM 4 Placement System FS-3200 High Performance Loudspeakers Assembling the Speakers Figure 5 Straight Bracket Figure 4 Bracket installation Mount the brackets to the speaker with the included short machine screws Figure 6 Angle Bracket Make sure the closed side of the brackets are facing the ends of the speaker Double Keyhole for flush mounting Figure 7 Center Channel Rocker Base Installation FS-3200 Manual.indd 4 10/6/04 11:00:09 AM Assembling the Speakers Instruction Manual 5 Placement Speaker/room interactions have a significant impact on the sound of the system. The Model FS-3200 speakers have been designed to deliver outstanding performance when mounted on the wall or used with their optional floorstands. When mounted on the wall, the FS-3200LR speakers may be turned "upside down" so the tweeter is either at the top or the bottom end of the cabinet, depending on whether the FS-3200C is mounted above or below the video screen. You may also simply mount the speakers to the wall using the builtin keyhole bracket. Because of the high quality components used, these speakers are very heavy for their size and care must be used when hanging them. Be sure to use a strong screw to drive into the wall, one whose head and shaft will fit properly within the keyhole opening and slot. Also be sure to drive the screw directly into a stud or to use a mounting device (such a molly-bolt) that is capable of safely holding the speaker's weight. Never simply drive a nail or screw into sheet rock or other wall materials, as this mounting method may not be sufficient to safely support the weight of the speaker. NOTE: Always consult a knowledgeable installer regarding the proper mounting hardware to use with your speakers. Speaker Placement and Home Theater Remember that the primary goal of a good home theater is not to make you believe that you are in a movie theater. It's to make you believe you're in the movie. For a home theater system, place the FS-3200LR speakers on either side of your flat screen display. The left and right front speakers should be far enough apart (6 to 10 feet, 2-3 meters, is usually best) that you get a good stereo "image" when they are playing alone, but not so far apart that the sound seems to be disembodied from the TV, distracting you from the picture. When also using a center channel speaker, a wider separation of the left and right front speakers is usually possible. You may choose to "toe" the LR speakers in, aiming them approximately at the prime listening position with the Angle Bracket (supplied - See figure 6). This can be particularly useful if the front LR speakers are fairly far apart. The FS-3200C center channel speaker can be mounted either above or below the video display. This speaker also comes with your choice of two wallmount brackets, a Straight Bracket that points the speaker straight ahead, and an Angle Bracket that either points the speaker down at the listeners (if it's mounted above the display) or up at the listeners (if it's mounted below the display). In addition, the FS-3200C can also be used as a traditional set-top center channel speaker. Should you choose to use it that way, we've included Atlantic's exclusive Rocker Base. This base attaches easily to the bottom of the speaker so that it may be tilted up or down towards the listening are as needed. Alternately, the speaker can be placed directly on a shelf or on the television without the rocker base, if desired. Four self-adhesive rubber feet are included to prevent vibration and protect the mounting surface. See figure 7 to attach the Rocker Base IMPORTANT NOTE Try to keep the LR and C tweeters at approximately the same height (within 12-18 inches) and aimed at ear level when seated. Doing so provides a more realistic spread of the sound into the room, making for a much better sonic experience for a group of listeners and reducing the need to sit in a precise "sweet spot." Speaker Placement for a 3-Piece system FS-3200 Manual.indd 5 10/6/04 11:00:10 AM 6 Speaker Placement System FS-3200 High Performance Loudspeakers Speaker Placement -- Optional Surround and Subwoofer FS-3200 Manual.indd 6 10/6/04 11:00:11 AM Connecting Your System Instruction Manual 7 Surround Effects and Speaker Locations All Atlantic Technology speakers are "voiced" to the same standards of tonal neutrality and sonic accuracy. We design all of our speakers to transmit the program material into the listening environment as precisely as possible. Therefore, any of our surround speakers, such as our model 2200SR Bipole/ Dipole surround speakers, would be an excellent match for an FS-3200based home theater system. Begin with the side speakers set to "Dipole," then experiment with the Bipole/Dipole switch to obtain the most pleasing and realistic effect in your listening room. See your Atlantic dealer or visit our website (www.atlantictechnology.com) for more information. The best location for surround speakers is straight out to the sides, or slightly behind the primary listening area, approximately 1-2 feet (.3-.6m) above seated ear level, but no closer than 2 feet (.6m) from the ceiling. (See figure 6.) The surround speakers are primarily intended to re-create the ambient sounds taking place in the movie scene. Therefore, throughout most of a movie or TV program you may not be consciously aware of output from these speakers. In other words, don't worry if you aren't hearing the surround speakers. Please try to avoid the trap of turning the surrounds up and up so that you hear them most of the time. The result will be a much less believable surround experience. Connecting Your System We recommend that you connect your system using high quality dual conductor stranded wire of 16 gauge or heavier, for lengths up to 25 feet (8m) . Remember, the lower the gauge number, the heavier the wire. Use heavier gauge wire for longer runs. Please contact your audio/video dealer or installer for specific cable recommendations and further information regarding special circumstances. The terminals themselves are designed to allow the use of very heavy speaker wire or connectors. Be sure to tighten them securely, but don't over-tighten them. WARNING: To prevent risk of electrical shock or damage to your equipment, always switch off the amplifier or receiver when making any system connections. You can connect your speakers by using a variety of audio connectors such as banana plugs, pin connectors, spade lugs, etc., or you can: 1. Remove ½" (13mm) of insulation from each wire end. 2. Twist the stranded wire together, keeping the two ends separate. 3. Place the appropriate wire through the postholes in the connectors. These holes are revealed when you loosen the connector's capscrew. 4. Tighten down the capscrew tightly, but be careful not to over tighten it. 5. Check the tightness of the capscrews 24 hou ...