User manual AUDIOVOX CE152MP

Portable MP3 CD Player at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. Avoid using headphones / earphone at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you. If you have any questions or problems concerning your unit, please consult your nearest dealer. DISC PLAYINGS 1. Open the CD tray with the " OPEN " button. 2. Insert the CD with the printed side facing upwards and push the disc gently until it clicks so that the disc fits into the pivot. 3. Press the CD door to close. On display windows When you press " " , the display window shows: POWER SOURCE Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. Using With Batteries Insert two size AA batteries (LR6 or MN1500 alkaline) according to the " " and " " marks correctly aligned. During play The track number of the current selection appears. When " " is pressed during play, total numbet of tracks on the disc will be displayed and the unit is still on. The unit will be returned to full stop mode automatically after approximately 30 seconds if no button is pressed again within the 30 seconds. Or press " " for few seconds to stop unit. Notes on batteries · Insert batteries with correct polarity. · Do not use old batteries together with new ones or different types of batteries together. · If the electrolyte inside the battery should leak, wipe the contaminated parts in the battery compartment with a cloth and replace the old batteries with new ones. · When the unit is not to be used for a long period of time, remove the batteries. · Do not mix old new batteries. · Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries. CAUTION The use of optical instruments with this product will increase eye hazard. During pause The elapsed time will flash. Pause mode of the first track INFORMATION (For the customers in USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet that is on a circuit different from the one the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Notes on " " · During playback (batteries are in use), " " is off. " and "Low Battery" · When the battery voltage level is low, " will display for approx. 10 ~15 minutes, playback still continues in this period. · Playback would automatically come to a stop when the batteries have no more power. Replace all the batteries with new ones. ·" " would not be on if an AC adaptor is used. When no disc is inserted into the player and when " " is pressed, the display window shows " ". The unit cannot be operated when the message is displayed. After approx. 30 seconds the unit will return to full stop mode, or reset the player by pressing and holding " " and then insert a disc to start playing. Using on house current If the unit you purchased does not include an AC power adaptor, please use a 6V 450mA AC power adaptor. Plus pole " " to the centre pin of the 3.5mm socket. When the unit is not to be used, be sure to disconnect the AC power adaptor. VARIOUS PLAYING MODES During playback, every time the PLAY MODE key is pressed, the mode would be changed to the next one as follows: NORMAL play -> ( ) Repeat One -> ( ) Repeat All -> FUNCTION OF CONTROLS ( ) Repeat Dir (for MP3 play mode only) ->(INTRO) Intro Scan -> Random -> Random All -> Random Dir (for MP3 play mode only) -> Repeat Off NORMAL play - Playing the whole disc The CD is played once from beginning to end. For the Customers in the United Kingdom and / European countries This Compact Disc player is classified as a CLASS 1 LASER product. The CLASS LASER PRODUCT label is located on the bottom exterior. REPEAT PLAYBACK (Repeat One / Repeat All / Repeat Dir) PROGRAM BUTTON PLAY MODE BUTTON ENTER BUTTON STOP BUTTON SKIP BUTTON LCD DISPLAY SAMRT FIND BUTTON DIR/FILE/EPS BUTTON PLAY/PAUSE BUTTON SKIP BUTTON MULT-JOG ROTARY BUTTON OPEN KNOB For the Customers in Canada This apparatus complies with theClass B limits for radio noise emissions set out in radio interference regulations. This product contains a low power laser device. · To repeat the same track Press " PLAY MODE " during play until " Repeat One " appears in the display window. Select desired track to be played only once by pressing " " or " " or by Multi-Jog Rotary. · To repeat the whole disc Press " PLAY MODE " during play until " Repeat All " appears in the display window. · To repeat the directory of MP3 disc Press " PLAY MODE " during play until " Repeat Dir " appears in the display window. PRECAUTIONS On safety As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. Do not put any foreign objects in the safety slot inside the disc compartment. If you do so, the laser beam may come out when the lid is opened. Do not put any foreign objects in the DC in 6V (external power input) jack. Should any solid objects or liquid fall into the unit, disconnect the power supply and have the unit checked by qualified personnel before operating it any further. SMART FIND BUTTON It activates smart find mode for MP3 disc. It changes smart find mode. PLAY MODE BUTTON It changes playing mode as follows (In case of non seven key option). For CD : Repeat one -> Re peat all -> Intro scan -> Random -> Random all -> Repeat off For MP3: Repeat one -> Repeat all -> Repeat Dir -> Intro Scan -> Random -> Random all -> Random Dir -> Repeat off PROGRAM BUTTON It reserves songs to play in the program play mode. SKIP/SEARCH BUTTON It activates skip to next track (or directory) and activates high-speed forward search. It activates character input position to right direction. SKIP/SEARCH BUTTON It activates skip to previous track (or directory) and activates high-speed reverse search. It activates character input position to left direction. PLAY/PAUSE BUTTON It release stand by mode, playing starts from stop mode. It toggles playing and pause. MAIN SOCKET VOLUME KNOB PHONE JACK STOP BUTTON It activates stop mode from playing mode, activates standby mode. It clears all program memory in the program memory mode. DIR/FILE/ESP BUTTON It changes from ESP/BYPASS mode to BYPASS/ESP for CD disc (default ESP mode). It changes skip condition by file level or directory level for MP3 disc (default file skip mode). It changes smart find mode. ENTER BUTTON It enters selected character for smart find mode. It activates playing selected title or album. MULTI-JOG ROTARY BUTTON Select character for smart find mode and select album or title for MP3 disc. And it is also used to search track in high speed. OPEN KNOB It activates open door. DC IN 6V Main socket. VOLUME CONTROL Adjust the volume. PHONES JACK For connecting the headphones / earphones. INTRO PLAY - Playing the First About Ten seconds of all the selections: 1. Press " PLAY MODE " button during play until " Intro Scan "appear in the display windows. 2. It starts intro playing automatically (play each track for approx 10 second). * Automatically " Intro " play always starts from the track that immediately follows the current running one. * By " " or " " button or Multi-Jog Rotary, you may start intro play from the track selected. On operation Since the CD system offers a wide dynamic range, the peaks of the high level inputs are recorded with high fidelity, and the noise level is very low. Do not turn up the volume while listening to a part of the disc with no audio signals or very low level inputs. If you do so, the speakers may be damaged when the peak level of the sound is played. The lens on the disc table should be kept clean. Do not touch the lens or poke at it. If you do so, the lens may be damaged and the unit will not operate properly. RANDOM PLAY - Playing the selections in random order 1. To random Press " PLAY MODE " button during play until " Random " appears in the display window. After all files are played, system will stop automatically. * To locate the next track: press " " or use multi-rotary button by clockwise. However, you cannot locate a previous track even if you keep " " pressed. 2. To random all Press " PLAY MODE " during play until " Random All " appear in the display window. All tracks will play without sequence repeated. * To locate the next track: press " " or use multi-rotary button by clockwise. However, you cannot locate a previous track even if you keep " " pressed. 3. To random dir (only for MP3 ) Press " PLAY MODE " during play until " Random Dir " display in the display window. It can play all tracks of a directory on MP3 disc without sequence repeated. * To locate the next track: press " " or use multi-rotary button by clockwise. However, you cannot locate a previous track even if you keep " " pressed. On installation Never install the unit where it would be subjected to: - heat sources such as radiators or airducts. - direct sunlight. - excessive dust. - moisture or rain. - mechanical vibration or shock. - uneven surface. · Do not place any heavy object on top of the unit. · When the unit is used with an AC power adaptor, do not wrap the unit in a cloth, blanket, etc. If you do so, the temperature inside and outside the unit may rise considerably, resulting in malfunctioning of the unit or serious accidents. · If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the unit. Should this occur, the unit will not operate. In this case, remove the disc and leave the unit in a warm place for several hours until the moisture evaporates. · For the unit to operate at its best, it should not be subjected to temperatures below 5o C (41o F) or above 35o C (95o F). Notes on headphones / earphone Do not use headphones / earphone while driving, cycling, or operating any motorized vehicle, it may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your headsets NOTE: · In any play mode, it starts operation automatically after seconds without pressing " " button. · " " button works during any play mode to hold or resume the current play mode. · To cancel current play mode 1. By Pressing " PLAY MODE " button during play to change play mode. 2. By Pressing PLAY MODE button during play until "Repeat Off " appears on the display. It goes back to normal play. 4. Press " " or " " or Multi-Jog Rotary to search a file and then file number is displayed. 5. Press " " to play the file if system is in stop mode. 6. During searching the file, file number is shown on the display. TROUBLE SHOOTING GUIDE Should any problem persists after you have made the following checks, consult your nearest service facility. Disc play does not start: · The disc is inserted upside down or incorrectly. Insert the disc correctly with the label surface up · Dusty or defective disc · Dirty or dusty lens · The disc compartment lid is not closed · Moisture condensation -> Leave the unit in a warm place until the moisture evaporates · The AC power adaptor is not plugged into the wall outlet · The unit is not placed on a level surface · Weak batteries No sound from the headsets: · The headphones / earphones plug is not firmly connected to the " PHONES " jack · Adjust the " VOL " control · Dirty plug Skipping of sound: · Dirty or defective disc · Dirty lens. · Strong vibration When using with batteries the battery life is short: · Manganese batteries are used. Use alkaline batteries The unit cannot be operated: · No disc , dirty disc or scratched disc. The unit will return to full stop mode after approx. 30 seconds, or reset the player by pressing and holding " " down for about 2 seconds and then insert a disc to start playing. · When recording on CD-R discs, use 74-minute (650M) discs. Do NOT use 80-minute (700M) · The CD-R or CD-RW discs should be "finalized" in computer by "single section format" · We continually strive to improve our products, specifications may change without prior notice. Smart find function 1. Press the SMART FIND button at stop mode. The display shows: Press ENTER button to select. Display shows "Smart Find" " _ " and is ready for editing. 2. Press SMART FIND button to change into album find mode. The display shows: Press ENTER button to select. Display shows "Smart Find" " _ " and it is ready for editing. Progm (PGM) Play - Playing the selections in the desired order 1. In stop mode press PROGRAM button until "PGM" and a flashing "00 " appear in the display window. "00 " means track number indication, P-001 means program number indication. 2. Press " " or " " or Multi-Jog Rotary to select. For example track number 5 as first selection, the display shows: 3. Press PROGRAM button , your first selection 5 will be registered. At this moment, the trake number indication will return to a flashing "00 " and the program number indication will skip to P-002. Now it is ready to begin your second selection. 4. Repeat steps 2 and 3 until memory is full (possible up to 32 songs). 5. Press " " button, your first selection 5 and its' program registered number P-001 appear on the display. It starts play from first selection 6. To stop the program, press the " " button. For Editing 3. Rotate MULTI-JOG to select character. Character will be changed from 0~9 to A~Z. 4. Press ENTER button to input a selected characters. 5. Repeat steps 3 and 4. Up to 8 characters can be input. 6. Rotate MULTI-JOG button to select space character, then press ENTER button to confirm, which is between "0" and "z". 7. If mistake, press SKIP button to change input position. And repeat steps 3 and 4. 8. Press ENTER button to search file or album. 9. Press ENTER or " " button to play searched file or album. NOTES: · Repeat play and " INTRO " play can be performed during program play. · The program is also erased when the disc compartment is opened or the auto power off function turns the power off. · If the program mode is exited by means of the " " button, all the programs would still remain in memory. DISPLAY FORMAT FOR DOT TRIX LCD Following display format is based on two line X12 characters dotmatrix LCD display. Some ICONs can be inserted · When power on and TOC reading · When MP3 volume reading MAINTENANCE Cleaning the unit Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth. Cleaning CD If the CD skips or will not play, the disc may need to be cleaned. Before playing, wipe the disc from the centre out with a cleaning cloth. After playing, store the disc in its case. Handling the disc Only touch the CD on the edge to avoid finger prints on its surface. Do not stick paper or tape nor write anything on the surface. Program Edition To check: Press " PROGRAM " lightly during programming before you press " " . Each time " PROGRAM " is pressed the track number appears in the display window. To delete: When open the CD door including that program will be cancelled. · When cannot detect disc · When cannot detect MP3 file · When search a track (CD-DA) · When search a track (ESP) SPECIFICATIONS General Output (at 1KHz 0dB level) Headphones / earphone (stereo mini jack) 15 mW + 15 mW at 16W to 32W 2 size " AA " (LR6 or SUM-3) alkaline batteries, or DC IN 6V, 450mA power adaptor Polarity of plug Approx. 129 x 33 x 141 mm (W/H/D) Approx. 249g (not include batteries) AC100V 50/60Hz (Japan) AC120V 60Hz (U.S.A, Canada) AC220-240V 50Hz (Singapore, Malaysia & Thailand) AC230V 50Hz (Chile) AC230V-240V 50Hz (Europe) AC240V 50Hz (Middle East & Australia) DIGITAL ANTI-SHOCK SYSTEM · When search a track (MP3) · When playing a track (CD-DA) With a conventional portable CD player, you might have experienced that the music stopped. e.g. When jogging the ELECTRONIC SKIP PROTECTION protects against loss of sound caused by vibrations and shocks. Continuous playback is ensured. However, it does not protect the set against any damage caused by dropping! · Press the DIR/FILE/ESP button during playback to activate the shock protection. " " is shown and the protection is activated. · To deactivate the shock protection, press the DIR/FILE/ESP button to OFF the ESP. " " goes off and the protection is deactivated. NOTE: When playing MP3 tracks, the ESP feature is automatically activated, regardless of the ANTI-SHOCK button setting. Power requirements · When playing a track (ESP) · When stopped (CD-DA) · When stopped (ESP) · When stopped (MP3) Dimensions Weight Operating voltage · When pause (CD-DA,ESP,MP3). Elapsed time will be blink 0.5 seconds interval MP3 - CD PLAYBACK To play MP3-CDs · This set can read CD-DA, MP3 disc. 1. Place a MP3 CD-ROM with the label side up. Push the CD centre lightly to set it in position. 2. Press " " to start playback. The display shows " " and the current track number and its' elapsed playing time. 3. Press " " button to stop playback. · While programing memory (CD-DA) "00" means waiting mode until a track is specified, "P-001" means programmed order We continually strive to improve our products, specifications may change without prior notice. · While programing memory (ESP) · When programing memory (MP3) · When Smart Find function is enabled Searching a track/album · You can search a track/album at playback mode or stop mode. · In stop mode. The display will show the total number of tracks, and the total number of albums. 1. Press " " or " " to search a track/album. By the MULTI-JOB rotary, user can search a track (file) in high-speed. 2. If in stop mode, press " " to start playback. · By pressing ENTER button By pressing ENTER button · By rotating MULTI-JOG By pressing ENTER button A flashing " _ " will appear on the display. 3. If you wish to start playback from another track within the album, press " " or " " briefly and repeatedly until the display shows the desired track number. · By pressing ENTER button one more · When found 30 files with file name "AXXXXXX" Searching a file Basically this system support two kinds of file search mode to search a file at high-speed. The one is to search a directory level; the other is to search a file number. Following sequence is the method to search a file. 1. Press the DIR/FILE/ESP button to make directory search mode (default is file search mode). Wording " DIR " appears in the left upper corner of the display. 2. Press " " or " " or Multi-Jog Rotary to search a directory and then directory number is displayed. 3. Press DIR/FILE/ESP button again, wording "DIR" disappears. It goes back to the default (file search mode). · When file is not found After 2 seconds · When door open · When STOP button was pressed to go stand by mode. System will be power off after a few seconds 811-873191-010 Printed in China