D1812PK PORTABLE 8" LCD MONITOR AND DVD PLAYER IN A BAG PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in "park" or when the vehicle's parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver's seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Notice: This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com Content A. Introduction .......................................................................... 4 B. Cautions and Warnings ...................................................... 4 C. Contents ............................................................................. 6 D. Powering and Installation .................................................... 7 E. Vehicle Installation..........................................................7 F. Controls, Indicators, and Connectors ................................. 9 G. Loading and Playing a Disc ................................................ 10 H. Setup.................................................................................... 11 I. Basic Operation ................................................................ 20 J. Menu ................................................................................. 21 K. Display............................................................................... 21 L. Playing Audio CDS ............................................................. 27 M. Playing MP3 Discs ............................................................ 29 N. Playing JPEG files ............................................................... 31 O. Connecting to a TV or another monitor ............................ 33 P. Specifications ................................................................ 34 Q. Rechargeable Battery Installation and Use ...................... 35 R. Troubleshooting ................................................................ 37 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com A. Introduction Thank you for choosing the D1812PK. The main features include a 8" Wide Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor, a DVD player and a game controller with 30 built-in games. The unit applies the latest state of the art electronics and is designed for use in hotels, offices, vehicles or your home. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy installation. Please read the entire instruction manual supplied with this product prior to use. The documentation will assist you in installing the system properly to obtain the best equipment performance. Please save this manual for later use. B. Cautions and Warnings 1. Placement To prevent fire or electric shock, do not expose this appliance to rain or moisture. Do not place the set on an unstable cart, stand, tripod, bracket or table to prevent it from falling. Keep the unit away from strong magnets, heat sources, direct sunlight, excessive dust. If the unit is brought directly from a cold to a warm location, moisture may condense inside the unit. When you move it from a cold to a warm location, wait for about one hour before operating the unit, or remove the disc and leave the unit turned on until the moisture evaporates. 2. Installation Ensure that the D1812PK is installed in accordance with the instructions and illustrations provided in this manual. 3. Caution Do not push objects of any kind into the unit through openings; do not spill or spray liquid of any kind on or in the system (this may result in a fire or electric shock). Do not place anything heavy on the unit. To ensure proper ventilation and proper operation, never cover or block the slots and openings with a cloth or other material. 4 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com Keep the unit away from an open flame such as,.fire, candle etc,. It is hazardous to replace the battery incorrectly. Replace the battery only with the same or equivalent type. In order to protect the enviromnent please dispose of the battery properly. Do not use the unit in temperatures higher than 104 degrees Fahrenheit or 40 degrees Celsius. 4.Disassemble Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified service personnel if your system needs repair. 5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only. 6. Disc Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources. Do not touch the surface of disc. Handle the disc by its edge. Clean the disc by wiping the disc from the center out with a cleaning cloth. Remove the disc from the unit and store it in its case after playing. Some playback operations of discs may be intentionally fixed by software producers. Since this unit plays discs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the discs. 7. Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don't match, the disc won't play. This unit's code is region 1. DVD's with other regional codes cannot be played in this unit. 5 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com C. Contents 1. 1 x 8'' LCD Monitor & DVD Player 2. 1 x AC to DC Adapter 3. 1 x Remote Control with battery (CR2025) 4. 1 x Instruction Manual 5. 1 x Audio/Video Adapter Cable 6. 1 x DC Power Adapter 7. 1 x Rechargeable Battery 8. 1 x Y Connector (for headphones) 9. 2 x Wired headphones 10. 1 x Bag W/ Straps D. Powering and installation 1. Powering the system indoors (Refer to Figure 1) Plug one end of the AC to DC adapter into the DC 9V jack on the left side of the main unit, then plug the other end into the 120V AC power outlet. 2. Powering the system in a car (refer to Figure 1) Plug one end of the DC Power adapter into the DC 9V jack on the unit, then plug the other end into the vehicle power outlet. Figure 1 6 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com E. Vehicle Installation Make sure that the unit is placed into the bag with the clear plastic covering on the right side of the unit. Load the disc into the DVD compartment and then adjust the retaining cord across the top portion of the unit. If you are installing the bag onto the seatback you may need to use the Seat Standoff attached to the back of the mounting bag to obtain the proper viewing angle as shown in Figure 2 1. Installing the System onto the seat back in a car (Refer to Figure 2) Figure 2 1). Take one of the supplied straps from the carrier bag. Connect the latch to one of the upper metal rings on the mounting bag. Connect the "S" hook to the other upper metal ring and place the loop over the headrest. Adjust the strap until the bag is firmly secured. 2). Take another strap from the carrier bag, and connect the latch to the lower metal ring on the left side of the bag. Attach the "S" hook to the same ring after looping the strap around the seat rail. Repeat this process for the right side. In some vehicles, it may be necessary to attach the "S" connector to the rail directly, as it may not be long enough to reach back to the ring. 3). Adjust the straps tightly so that the bag is secured. 7 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com 2. Installing the system between the driver/passenger seat (Refer to Figure 3) Figure 3 1). Take one strap and connect the latch to the upper metal ring on the left side of the bag. Attach the "S" hook to the same ring after looping the strap around the headrest of the driver's seat. Repeat this process for the right side (Passenger Seat). 2). Take another strap and connect the latch to lower metal ring on the left side of the bag. Attach the "S" hook to the same ring after looping the strap around the driver's seat rail. Repeat this process for the right side. In some vehicles, it may be necessary to attach the "S" connector directly to the rail, as it may not be long enough to reach back to the ring. 3). Adjust the straps tightly so that the bag is secured. 8 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com F. Controls, Indicators, and Connectors 1. Unit View (Refer to Figure 4) Figure 4 1) LCD Panel Shut Off Switch 2) Wide Button 3) Stop Button 4) Previous Button 5) Next Button 6) Play Button 7) Menu 8) Up Button 9) Right Button 10) OK/Enter Button 11) Down Button 12) Left Button 13) AV IN/OUT Switch 14) Audio Jack 15) Video Jack 16) Headphone Jack 17) Volume Up/Down Control 18) Brightness Up/Down Control 19) Power On/Off Switch 20) Power LED 21) Remote Control Sensor 22) Open Button 23) Charge LED 24) DC 9V Input Jack 25) E Port 9 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com 2. Remote Control View (Refer to Figure 5) 1) Display Button 2) Angle Button 3) Subtitle Button 4) Audio Button 5) Zoom Button 6) UP/DOWN/LEFT/RIGHT/ ENTER Buttons 7) Return Button 8) A-B Button 9) Forward Button 10) Reverse Button 11) Slow Button 12) Stop Button 13) Numeric Keypad 14) Setup Button 15) Menu Button 16) Repeat Button 17) Previous Button 18) Next Button 19) Play Button Figure 5 20) Pause Button G. Loading and Playing a Disc a. After connecting power to the unit, turn on the "DVD player" with the power switch. The power indicator will light. b. Open the disc tray by sliding the OPEN button in the direction of the arrow and place a disc into the tray with the label side facing up. c. Close the tray by pressing the area marked "PRESS" on the disc door. The unit will read the disc and start playing. d. Rotate the BRIGHTNESS and VOLUME controls to adjust the brightness and the volume to the desired levels. e. To stop playing a disc, press STOP. 10 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com H. Setup Press `SETUP' to display the Main screen of the Setup Menu on the screen. Press `SETUP' again to exit the Setup Menu and the unit will resume it's last playback mode. Main Setup Menu Screen 1) Press "SETUP", the `General Setup Page' will display on screen. a).Select `TV Display' using the UP/DOWN button, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DOWN, and press ENTER to confirm the setting. Press LEFT to return. * Normal/PS: When the player is connected to a normal TV, and a wide picture is shown on the full screen. * Normal/LB: When the player is connected to a normal TV, and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen. * Wide: When the player is connected to a wide screen TV, a wide picture is shown on the full screen. TV Display Screen Display 11 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com b).Select `TV Type' using the UP/DOWN button, and then press the RIGHT button to enter the submenu. Choose TV Type using the UP/ DOWN button and then press ENTER to confirm the setting. Press the LEFT button to return. TV Type Screen Display c).Select `Angle Mark' using the UP/DOWN buttton, and then press the RIGHT button to enter the submenu. Choose Angle Mark on or off using the UP/DOWN button and then press ENTER to confirm the setting. Press the LEFT button to return. Angle Mark Screen Display * On: The screen will show th ...