INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES MODEL NUMBER / NUMERO DE MODELO: WD30EC THERMOELECTRIC WATER DISPENSER ENFRIADOR DE AGUA TERMOELECTRICO BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. La sección en español empieza en la página 12. Avanti Products, A Division of the Mackle Co., Ltd. P.O. Box 520604 - Miami, Florida 33152 www.avantiproducts.com REGISTRATION INFORMATION Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days of purchase and receive these important benefits to the following address: Avanti Products, A Division of the Mackle Co., Ltd. P.O. Box 520604 - Miami, Florida 33152 USA ? Protect your product: We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft. ? Promote better products: We value your input. Your responses will help us develop products designed to best meet your future needs. ----------------------------------------------------------(detach here)---------------------------------------------------------Avanti Registration Card __________________________________ ______________________________________ Name Model # Serial # __________________________________ ______________________________________ Address Date Purchased Store/Dealer Name __________________________________ ______________________________________ City State Zip Occupation __________________________________ As Your Primary Residence, Do You: Area Code Phone Number ?Own ?Rent Did You Purchase An Additional Warranty: ?Extended ?None Reason For Choosing This Avanti Product: Please indicate the most important factors that influenced your decision to purchase this product. ?Price ?Product Features ?Avanti Reputation ?Product Quality ?Salesperson Recommendation ?Other ?Friend/Relative Recommendation ?Warranty ?Other_______________________ Your Age: ?under 18 ?18-25 ?26-30 ?31-35 ?36-50 ?over 50 Marital Status: ?Married ?Single Is This Product Used In The: ?Home ?Business How Did You Learn About This Product: ?Advertising ?In Store Demo ?Personal Demo ______________________________ Comments____________________________ _____________________________________ _____________________________________ 2 3 HELP US HELP YOU ... Read this guide carefully. It is intended to help you operate and maintain your new water dispenser properly. Keep it handy to answer your questions. If you don't understand something or you need more assistance, please call: Avanti Customer Service 800-220-5570 Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period. ____________________________________ Model Number Write down the model and serial numbers. You'll find them on a label located on the back side of the unit. Please write these numbers here: ____________________________________ Date of Purchase ____________________________________ Serial Number Use these numbers in any correspondence or service calls concerning your water dispenser. If you received a damaged water dispenser, immediately contact the dealer (or builder) that sold you the water dispenser. Save time and money. Before you call for service, check the Problem Solver Guide. It lists causes of minor operating problems that you can correct yourself. IF YOU NEED SERVICE We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further assistance. FIRST, contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem. NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to: Customer Service Avanti Products 10880 NW 30 Street Miami, FL 33172 USA 4 PARTS AND FEATURES 1 9 2 3 4 5 6 10 11 12 7 8 13 14 15 1. Water Intake 2. Hot Indicator Light (RED) 3. Cold Indicator Light (GREEN) 4. Cold Water Faucet (BLUE) 5. Hot Water Faucet/Child Guard (RED) 6. Built-in Cup Dispenser 7. Removable Drip Tray 8. Fixed Feet 9. Air inlet 10. Cooling Switch 11. Heating Switch 12. Cooling Fan Vent 13. Power Supply Cord with Plug 14. Hot Water Drain 15. Cold Water Drain 5 TABLE OF CONTENTS Registration Information ______________________________________________________________2 Help Us Help You ... __________________________________________________________________4 Parts And Features ___________________________________________________________________5 Important Safety Instructions __________________________________________________________7 Installation Guidelines ________________________________________________________________7 Operation Instructions ________________________________________________________________7 Before Using Your Water Dispenser_____________________________________________________7 Operating Your Water Dispenser _______________________________________________________8 Electrical Connection _________________________________________________________________8 Steps To Replace Water Bottle_________________________________________________________8 Cold Water Control ___________________________________________________________________8 Hot Water Control ____________________________________________________________________8 Care And Maintenance ________________________________________________________________9 Taking Dispenser Out Of Service _______________________________________________________9 Troubleshooting Guide _______________________________________________________________ 10 Service For Your Water Dispenser_____________________________________________________ 10 Your Avanti Products Warranty________________________________________________________ 11 Wiring Diagram _____________________________________________________________________ 12 INSTRUCCIONES EN ESPAÑOL____________________________________________________ 12 - 14 6 IMPORTANT SAFETY INSTRUCTIONS ? ? ? ? ? WARNING? To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: Read all instructions before using the water dispenser. Never clean parts with flammable fluids. The fumes can create a fire hazard or explosion. Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other water dispenser. The fumes can create a fire hazard or explosion Do not plug unit into receptacle until you ensure the water tank switches are off. -Save these instructions- INSTALLATION GUIDELINES ? ? Remove the exterior and interior packing. Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the appliance not to perform properly. Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center. This water dispenser is not recommended for outdoor use. Do not locate the dispenser in area where the temperature may fall below freezing (32º F). Keep area around dispenser free of dust and dirt. Keep the reserve supply of water bottles away from excessive heat and light. ? ? ? ? ? OPERATION INSTRUCTIONS Before Using Your Water Dispenser ? Check to be sure the following parts are included: ? 1 Instruction Manual ? 1 Cup Dispenser Bracket ? 1 Removable Drip Tray ? The water cooler is pre-cleaned at the factory but the reservoir and water lines must be flushed with fresh water before use as follows: o Keep the unit unplugged. o Fill water tank with tap water full to capacity (about 20 ounces). Wait for 5 minutes until water settles. o Proceed to drain the water from both faucets until no more water remains. o Then, drain any water left in the tanks by opening the water drain caps located on the bottom, until it drains completely. o Proceed to close the drain caps. Also make sure both faucets are closed. o Place the water bottle on the water intake, allow water to stand for approximately one minute. o Open water faucets to insure water flows from both faucets. o Plug dispenser into the electrical outlet. 7 o o Turn the cold and hot water switches ON (at the rear). Now you are ready to use your water dispenser. IT WILL TAKE APPROXIMATELY 1 HOUR TO REACH OPTIMUM TEMPERATURE. IF YOU CONSUME ONE 8 OZ. CUP THE RECOVERY TIME IS APPROXIMATE 25 MINUTES OR LESS. IF YOU CONSUME 2 OR MORE 8 OZ. LY CUPS RECOVERY TIME CAN TAKE UP TO 1 HOUR. NOTE: Your water dispenser has been cleaned and sanitized before leaving the factory, but in case a taste problem develops, place one tablespoon of baking soda and add tap water. Fill water tank again and repeat basic operations previously outlined. OPERATING YOUR WATER DISPENSER Electrical Connection ?WARNING? IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center. This appliance requires a standard 115/120 Volts A.C. ~/ 60Hz electrical outlet with three-prong ground. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury. Do not use an adapter plug with this appliance. Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service technician install an outlet near the appliance. Steps To Replace Water Bottle ? Use a clean cloth to wipe off neck of bottle. ? Remove cap, if there is one on. ? Insert the water bottle on the water intake over reservoir opening so it settles properly on it. ? Wipe off any water, which may have splashed on dispenser top. Cold Water Control Turn the switch marked "COLD" ON. The green (COLD) indicator will be lit and the process begins. When the water reaches the right temperature the green (COLD) indicator goes off automatically. Hot Water Control Turn the switch marked "HOT" ON. The red (HOT) indicator will be lit on and the unit will begin to heat the water. When the water reaches the right temperature the red (HOT) light goes off automatically. When the temperature goes down to approx. 86º C (187º F), the red indicator will glow again and another 8 heating process starts. NOTE: THE HOT WATER FAUCET HAS A CHILD-SAFETY GUARD ATTACHMENT. To get hot water: ? Press the safety button on the faucet and then push the faucet handle down. ? Continue holding safety valve while pushing down faucet handle as long as water is being dispensed. ? When faucet handle is released, make sure to return it to the original position. CARE AND MAINTENANCE ? ? Wash the inside of the reservoir with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. The drip tray and water faucets should be cleaned with mild detergent and warm water. TAKING DISPENSER OUT OF SERVICE ? ? ? If the water dispenser will not be used for a long period of time, turn both switches OFF (at the rear) and unplug the power cord from the wall outlet. Drain the water through the faucets. Drain the water from the tanks by removing the caps from the bottom of the dispenser. WARNING--THE WATER COMING OUT OF THE BOTTOM MARKED "HOT WATER DRAIN" MAY BE SCOLDING. 9 PROBLEMS WITH YOUR WATER DISPENSER? You can solve many common water dispenser problems easily, saving you the cost of a possible service call. Try the suggestions outlined below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE PROBLEMS Water dispenser does not operate. Water is not cold enough. POSSIBLE CAUSES Not plugged in. The circuit breaker tripped or a blown fuse. Check to be sure the COLD switch on the back is ON. Too much water has been drawn within a short period of time. If more than two 8 oz. Cups have been drawn within a 25 minute span, you will need to wait up to one hour to reach optimal temperat ...