INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES Model Number/Número de Modelo WD361 CAUTION: BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. La sección en español empieza en la página 15 Avanti Products P.O. Box 520604 - Miami, Florida 33152 www.avantiproducts.com 2 Registration Information Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days of purchase and receive these important benefits: ? Protect your product: We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft. ? Promote better products: We value your input. Your responses will help us develop products designed to best meet your future needs. ----------------------------------------------------------(detach here)---------------------------------------------------------Avanti Registration Card __________________________________ _____________________________________ Name Model # Serial # __________________________________ _____________________________________ Address Date Purchased Store/Dealer Name __________________________________ ______________________________________ City State Zip Occupation __________________________________ As Your Primary Residence, Do You: Area Code Phone Number ?Own ?Rent Did You Purchase An Additional Warranty: Your Age: ?Extended ?Food Loss ?None ?under 18 ?18-25 ?26-30 Reason For Choosing This Avanti Product: ?31-35 ?36-50 ?over 50 Please indicate the most important factors Marital Status: that influenced your decision to purchase ?Married ?Single this product. Is This Product Used In The: ?Price ?Home ?Business ?Product Features How Did You Learn About This Product: ?Avanti Reputation ?Advertising ?Product Features ?Product Quality ?In Store Demo ?Personal Demo ?Salesperson Recommendation ?Other______________________________ ?Friend/Relative Recommendation Comments____________________________ ?Warranty _____________________________________ ?Other_______________________ _____________________________________ 3 4 Read this guide carefully. HELP US HELP YOU... W rite down the model and serial numbers. You'll find them on a label located on the back side of the unit. Please write these numbers here: ____________________________________ Date of Purchase It is intended to help you operate and maintain your new water dispenser properly. Keep it handy to ans wer your questions. If you don't understand something or you need more help, please call: Avanti Customer Service 800-220-5570 Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period. ____________________________________ Model Number ____________________________________ Serial Number Use these numbers in any correspondence or service calls concerning your water dispenser. If you received a damaged water dispenser, immediately contact the dealer (or builder) that sold you the water dispenser. Save time and money. Before you call for service, check the Problem Solver Guide. It lists causes of minor operating problems that you can correct yourself. IF YOU NEED SERVICE We're proud of our service and want you to be pleased. If for some r ason you are not happy e with the service you receive, here are some steps to follow for further help. FIRST, contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem. NEXT, if you are still not pleased, write all the details, including your telephone number, and send to: Customer Service Avanti Products 10880 NW 30 Street Miami, FL 33172 5 PARTS AND FEATURES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. WATER INTAKE HOT WATER LIGHT (RED) POWER INDICATOR (YELLOW) COLD INDICATOR LIGHT (GREEN) HOT WATER FAUCET (PINK) COLD WATER FAUCET (BLUE) REMOVABLE DRIPTRAY ADJUSTABLE FOOT COOLING SWITCH HEATING SWITCH CONDENSER COIL POWER SUPPLY CORD WATER DRAIN 6 Table of Contents Registration Information Card __________________________________________ 3 Help Us Help You ____________________________________________________ 5 Parts and Features ___________________________________________________ 6 Important Safety Instructions___________________________________________ 8 Installation Guidelines ________________________________________________ 8 Height Adjustment ____________________________________________________ 8 Before Using Your Water dispenser ____________________________________ 9 Operating Your Water dispenser ______________________________________ 10 Steps To Replace Water Bottles_______________________________________ 10 Electrical Connection ________________________________________________ 10 Cold Water Control __________________________________________________ 10 Hot Water Control ___________________________________________________ 10 Cup Dispenser (Optional) ____________________________________________ 11 Care and Maintenance _______________________________________________ 11 Taking Dispenser Out Of Service______________________________________ 11 Troubleshooting Guide ______________________________________________ 12 Service For Your Water dispenser _____________________________________ 12 Your Avanti Products Warranty________________________________________ 13 Wiring Diagram______________________________________________________ 14 Instrucciones En Español _________________________________________15-17 7 Important Safety Instructions To reduce the risk of burns, fire, electrical shock, or injury when using your appliance, follow these basic precautions: ? ? ? ? ? WARNING? Read all instructions before using the water dispenser. Never clean parts with flammable fluids. The fumes can create a fire hazard or explosion. Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other water dispenser. The fumes can create a fire hazard or explosion Do not plug unit into receptacle until you ensure the water tank switches are off. -Save these instructionsINSTALLATION GUIDELINES: ? ? Remove the exterior and interior packing. Place your appliance on a floor that is strong enough to support the dispenser when it is fully loaded. If it does not sit level on the floor, adjust the front right foot to level the unit well to the floor. Note: Only the front right foot is adjustable. Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the appliance not to perform properly. Allow 2 inches of space between the water dispenser and the wall, which allows for proper air circulation to cool the compressor. Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not cut or remove the third (ground) prong from the power cord under any circumstances. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center. This water dispenser is not recommended for outdoor use. Do not locate the dispenser in area where the temperature may fall below freezing (32º F). Keep area around dispenser free of dust and dirt. Keep the reserve supply of water bottles away from excessive heat and light. Never unplug the water cooler, except for maintenance. ? ? ? ? ? ? ? ? ? Height Adjustment Unit is provided with four feet extensions, if you wish to make the unit taller, just attach all four parts to the bottom feet by placing them on existing feet and pushing firmly to ensure a tight fit. Unit will be slightly taller. The adjustable foot can still be used for leveling after the extension part is inserted. 8 OPERATION INSTRUCTIONS: Before Using Your Water Dispenser Check to be sure the following parts are included: ? Instruction manual ? 4 extra cup dispenser cabinet plugs ? Accessories order form. ? 4 height adjustment foot extensions ? Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. ? The water dispenser is pre-cleaned at the factory but the reservoir and water lines must be flushed with fresh water before use as follows: ? Keep the unit unplugged. ? Fill water tank with tap water full to capacity (more than 3/4 of a gallon). Wait for 5 minutes until water settles. ? Press the hot water faucet until water comes out, then stop. ? Plug the dispenser into the electrical outlet. Both heating and cooling indicator lights on front will light up at first. We are ready to complete the first cycle. In order to do that, wait for the hot water indicator light to go off first (approximately 10 minutes), then wait for the cold water indicator light to go off (another 40 minutes, approximately). ? Unplug the dispenser from the electrical outlet. Proceed to drain the water from the faucets one at a time until no more water remains. (Note: To facilitate this operation, use a large container). ? Then, drain any water left in the tanks by opening the drain plug located on the back, until it drains completely. ? Proceed to close the drain cap. ? Place the 5-gallon bottle of water on the water intake, allow water to stand for approximately one minute. ? Open water faucets to insure water flows from both faucets. ? Plug dispenser into the elec trical outlet. ? Now you are ready to use your water dispenser. ? NOTE: Your water dispenser has been cleaned and sanitized before leaving the factory, but in case a taste problem develops, place two tablespoons of baking soda and add tap water. Fill water tank again and repeat basic operations previously outlined, except turn the switch marked HOT "OFF" to avoid leaving residues in hot water tank. ATTENTION: If you do not plan to use the water heating function for more than three days, we recommend that you turn the HOT switch to the "OFF" position. ATTENTION: If you do not plan to use the water heating function for more than three days, we recommend that you turn the HOT switch to the "OFF" position. ?WARNING? IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER. 9 OPERATING YOUR WATER DISPENSER ? ? ? ? ? ? ? Steps to replace water bottles Use a clean cloth to wipe off neck of bottle. Remove cap. Carefully lift bottle (approx. 40 lbs.) using your legs and not your back. Do not place hands on opening of bottle while placing in reservoir. Insert the water bottle on the water intake over reservoir opening so it settles properly on it. Wipe off any water which may have splashed on dispenser top. When a new bottle is installed you must open the hot water faucet and remove no less than 4 full cups of water to insure the water flows properly and the water reservoir is at the proper level. ? Electrical Connection This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center. This appliance requires a standard 115/120-volt. 60Hz electrical outlet with three-prong ground. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury. Do not use an adapter plug with this appliance. Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service technician install an outlet near the appliance. ? Cold Water Control Turn the cooling switch on. The green indicator will be lit on and the process begins. When the water reaches the right temperature the green light goes off automatically. ? Hot Water Control Turn the heating switch on, the red indicator will be lit on and the heating process starts. When the water reaches the right temperature the red light goes off automatically. When the temperature goes down to approx. 80º C (176º F), the red indicator will glow again and another heating process starts. NOTE: THE HOT WATER FAUCET HAS A CHILD-SAFETY GUARD ATTACHMENT. To dispense hot water: ? Slide red safety button to the left and hold while pressing downward on hot water faucet to dispense hot water. ? Safety button will retur ...