B & K CT Series MZ-128 Remote Controller Reference Sheet The MZ-128 Remote Controller has multiple useful functions: 1) The MZ-128 Remote Controller may be used to control and setup a CT610/310/600. 2) The MZ-128 may be used as a source of IR for use in programming learning keypads etc... 3) The MZ-128 may be set to source the B & K IR functions listed below, for code sets 000-128 and 999. Setup the MZ-128 to use a discrete B & K code set: 1) Install 4 AAA batteries into the remote. Observe polarity. 2) Press and hold the B & K and MUTE buttons simultaneously for two seconds. The LED will light up solid red and stay illuminated. 3) Firmly press the desired B & K three digit code set. Always use three digits (i.e. 0-1-1 default for Zone A) 4) Press the B & K button again to confirm setup. The red LED will blink three times when the IR B&K MZ-128 Default Factory Code-Set is: 0-0-0 Whole House Control POWER ON/OFF MUTE CODE SET 000-128 MZ-128 BUTTON VOLUME PRESET OFF B&K POWER OFF B & K IR FUNCTION [POWER STATE] POWER ON POWER TOGGLE POWER OFF [VOLUME] MUTE TOGGLE MASTER VOL UP MASTER VOL DOWN [TONE CONTROL] BASS UP BASS DOWN TREBLE UP TREBLE DOWN LOUDNESS TOGGLE [INPUT SOURCE] SOURCE UP SOURCE DOWN VIDEO SOURCE UP ZONE DEDICATED IN TUNER AM TUNER FM IN 1 OR [V1] IN 2 OR [V2] IN 3 OR [TV] IN 4 OR [DVD] IN 5 OR [CD] IN 6 OR [SAT] IN 7 OR [TAPE] IN 8 OR [V4] IN 9 OR [V5] [FAVORITE PRESET] FAVORITE PRESET UP FAVORITE PRESET DN MZ-128 BUTTON AM FM TUNE + TUNE STA + STA M MENU LEFT RIGHT SEL/ENTER UP DOWN SAVE EXIT ZONE 0 1 2 3 4 5 6 7 8 9 +10 SAVE Õ UP L E F T R I G¯ H T MENU MUTE VOLUME VOLUME B+ BT+ TLOUD S+ SV+ D-IN AM FM IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8 IN 9 PRESET PRESET B & K IR FUNCTION [TUNER] SELECT THE AM BAND SELECT THE FM BAND TUNE FREQUENCY UP TUNE FREQUENCY DOWN TUNER FAV PRESET UP TUNER FAV PRESET DOWN STEREO / MONO [NAVIGATION] MENU UP/DOWN LEVEL LEFT OR BALANCE (L) RIGHT OR BALANCE (R) SELECT OR ENTER UP DOWN SAVE TOTAL EXIT FROM ALL MENUS ZONE SELECT [NUMERIC] 0 1 2 3 4 5 6 7 8 9 +10 ° SEL ENTER DOWN ® EXIT ZONE 1 2 3 IN 8 4 5 6 IN 9 7 8 9 D-IN DEDICATED +10 AM M ST/M 0 T+ ENTER LOUD LOUDNESS B+ BASS S+ SOURCE TREBLE FM V+ VIDEO + T- B- S- TUNE- TUNE+ STA- STA+ B & K Components, Ltd. Model MZ-128 B & K IR FUNCTION [B & K ALL COMMANDS] ON/B & K/POWER ALL B & K POWER ON OFF ALL B & K POWER OFF VOLUME ALL B & K VOLUME UP VOLUME ALL B & K VOLUME DOWN 0 ALL B & K VOLUME 0 DB 2 ALL B & K VOLUME -20 DB 4 ALL B & K VOLUME -40 DB 6 ALL B & K VOLUME -60 DB MUTE ALL B & K MUTE TOGGLE CODE SET 999 MZ-128 BUTTON Code-Set 128 Simply Explained Code-Set 128 is a special code-set which allows individual control of the Hardware Zone that the IR Data is received by. It will not function when received by the unit's front panel. I.e., Two keypads are plugged into Zone A & B's Control I/O Ports, when the remote comes into IR view of the keypad in Zone A, the 128 Code-set remote will only control Zone A, when in Zone A. Take that same remote into Zone B and it will only control Zone B. ...