Instructions for use KGNA 335 Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch Verkauf Kundendienst Ersatzteile Telefon 0848 801 002 Telefon 0848 801 001 Telefon 0848 801 005 Fax 0848 801 017 Fax 0848 801 003 Fax 0848 801 004 verkauf@bauknecht.ch service@bauknecht.ch ersatzteilverkauf@bauknecht.ch CB60 No-Frost PRODUCT SHEET GB A. Refrigerator Compartment 1. Shelves/Shelf area 2. Cold air Multi-flow system 2a. Multi-flow outlets 2b. Light bulbs 2c. Light cover 2d. Area of air suction 3. Fresh control compartment (lower temperature than in other refrigerator chamber) 4. Rating plate 5. Removable bottle holder 6. Door trays B. Freezer compartment 7. Rack for ice cube trays or ice packs (depending on model) 8. Upper basket (area for freezing) 9. Baskets for storing frozen food 10. Freezer compartment door trays (for pizza or other frozen food with a short term of storage) C. Control panel with LCD Anti-bacterial protection: 11. Hygiene + filter (depending on model) 12. Crisper drawer 13. Door seals Note: The number of shelves and shape of accessories may vary, depending on the model. All shelves, door trays and racks are removable. Do not obstruct the multi-flow intake area (2d) with food and outlets (2a). Important: Refrigerator/freezer accessories must not be washed in a dishwasher. Your new appliance is a combined ventilated, No-Frost fridge-freezer exclusively for domestic use. Whirlpool Total-no-frost fridge freezers circulate chilled air around the storage areas, reducing humidity to prevent the formation of ice, thereby completely eliminating the need for defrosting. Frozen items don't stick together, labeling stays legible and storage space remains clear. No-Frost's even temperature control also helps keep food fresher for longer. In combination with 6th Sense intelligent sensor control, it directs cooling power exactly where it is needed, optimising energy efficiency. The Hygiene+ filter assures a higher level of hygiene in the refrigerator through continuous purifying the air of bacteria. Remove it from the box (found in the crisper drawer item 12) and insert into the grille (item 11). Replace the filter every 6 months. 1. Remove the filter together with the grille and dispose as a whole. 2. Replace the filter and the grille with the new ones. 3. The replacement procedure is attached with the filter. This filter may be purchased from our After-sales Service outlets. The crisper and the door seals are manufactured from materials that inhibit bacterial growth. N DK FIN PL CZ SK H RUS BG RO I D GB F NL E P I GR S CONTROL PANEL DESCRIPTION Compartments ON / OFF, menu, selection and confirmation buttons 1. Refrigerator compartment Stand-by - ON/OFF button 2. Menu button 3. Appliance ON/OFF button 4. Selected compartment temperature increase button 5. Confirmation button 6. Selected compartment temperature decrease button. Functions and settings symbols Functions and settings for the refrigerator compartment Appliance, alarm and malfunction symbols ! Functions and settings for the freezer compartment Switching on the appliance: Press the On-Off button Switching off the appliance: Press the On-Off button again Adjusting the temperature: To change the temperature inside the refrigerator or freezer compartment, press the Menu button until the refrigerator or freezer temperature symbol turns on (symbol flashes). Then adjust the temperature by pressing the +/- buttons and confirm by pressing "OK". Displaying the refrigerator and freezer compartment temperatures. The temperature inside the refrigerator compartment can be adjusted between +2°C and + 8°C. In the same way, the freezer compartment temperature can be adjusted between -16°C and -24°C. ELECTRICAL CONNECTION When the appliance is connected to the power supply, the display lights up and all the symbols appear on the display for a few seconds. The factory setting -18°C appears and flashes, the symbol lits, while the refrigerator display shows a temperature of +5°C (factory-set). While the appliance is working to reach the factory-set temperature, the alarm icon lits , an acoustic alarm sounds and temperature symbol on the freezer display flashes (- -). This indicates that the appliance has not yet reached the optimal temperature for storage of foodstuffs. Press and hold the button until the acoustic alarm disables. The icon disappears when the freezer compartment reaches a temperature below -12°C, the display will show the temperature -18°C, at which point food can be loaded into the freezer compartment. After being switched on, the refrigerator needs from 2 to 3 hours to reach the correct temperature to store a typical volume of food in the refrigerator compartment. IMPORTANT: · If food is placed in the refrigerator before the appliance has cooled completely, it may deteriorate. · Turning the refrigerator and freezer controls to a cooler than recommended setting will not cool the compartments any faster. · A built-in exterior moisture control continuously guards against moisture build-up on the front edges; Do not be alarmed if these edges sometimes feel warm to the touch. The inside light switches on when the refrigerator door is opened. After 10 minutes of door opening the light switches off. 5019 637 01004 GUIDE TO SELECTING FUNCTIONS Functions are not available until freezer compartment reaches the temperature below -12°C. Functions and settings for the refrigerator compartment Refrigerator compartment door open Refrigerator compartment temperature setting Fast cooling This function should be selected before refrigerating fresh food. To select the function, keep pressing the menu button until the display shows the fast cooling symbol . The symbol flashes, press OK to confirm. The function is automatically disabled after 6 hours, or can be manually disabled by repeating the same procedure. Vacation This function turns the refrigerator compartment to a warmer state if you are going away for some time. To select the function, keep pressing the menu button until the display shows the vacation symbol . Press OK to confirm. To turn the refrigerator back to setting point repeat this procedure. Important: after activating this function, remove all perishable foodstuffs from the refrigerator compartment and leave the door closed, since the refrigerator maintains a suitable temperature to prevent the formation of unpleasant odours. ON/OFF This function turns off both the refrigerator and freezer compartments. To enable the stand-by function, press the "on-off" button for 3 seconds, two hyphens appear on both display to indicate that the appliance is on stand-by. To switch the appliance on again, follow the same procedure until the previously set temperature is shown on the display. When the appliance is on stand-by the light inside the refrigerator compartment does not work. Remember that this operation does not disconnect the appliance from the power supply. Fridge Stand-by This function turn off the fridge compartment while the freezer compartment continue to run. To enable the stand-by function, press the "Fridge stand-by" button for 3 seconds. To switch the fridge compartment on again, follow the same procedure until the previously set temperature is shown on the display. When the fridge compartment is on stand-by the light inside the refrigerator compartment does not work. Functions and settings for the freezer compartment Freezer compartment temperature setting Fast freezing This function must be activated before freezing fresh food. To select the function, keep pressing the menu button until the display shows the fast freeze symbol. Press OK to confirm. The function is automatically disabled after 24 hours, or can be manually disabled by repeating the same procedure. 5019 637 01004 Party mode To select the function, keep pressing the menu button until the display shows the party mode symbol . The symbol flashes, press OK to confirm. Use this function to chill drinks inside the freezer compartment. When the function is in operation, the symbol is animated. 30 minutes after selection (the time required to chill a 0.75 l bottle without the glass breaking), the symbol flashes, an acoustic alarm sounds and the display lights up: remove the bottle from the freezer compartment and press the OK button to disable the function. Important: do not leave the bottle inside the freezer compartment longer than the time necessary for chilling. Appliance, alarm and malfunction symbols "6th Sense" function The 6th Sense function is automatically activated when: · a large amount of food is loaded into the refrigerator and/or freezer · the refrigerator and/or freezer door is left open for a long time · a prolonged power failure takes place, causing the internal temperature of the appliance to increase to values that cannot guarantee safe storage of food. The symbol flashes for approximately 3 seconds, after which it remains permanently lit until optimal storage conditions have been automatically restored. Control panel lock function This function prevents anyone from inadvertently changing settings or switching off the appliance. To lock the control panel, press buttons "+" - "OK" - "-" at the same time for 3 seconds until the display shows the symbol : an acoustic signal confirms the function has been selected. To disable the function, follow the same procedure until the symbol switches off. Alarms In the event of an alarm, the acoustic alarm and indicator lights are activated. Freezer temperature alarm The acoustic alarm sounds: alarm symbol lights up and the temperature indicator flashes. The alarm is activated when: · The appliance is connected to the power supply for the first time or after prolonged disuse · The freezer compartment temperature is too high · The quantity of foods loaded into the freezer exceeds that indicated on the data plate · The freezer door has been left open for a long time automatically appears on the display Note: in these cases Power failure alarm The maximum temperature reached during a power failure flashes on the freezer display. The alarm symbol lights up and the acoustic alarm sounds at the same time. This alarm may activate when: · a prolonged power failure takes place, causing the internal temperature of the freezer to increase to values that cannot guarantee safe storage of food. To disable the alarm press OK, after which the pre-set temperature will appear on the display. Note: evaluate the state of the stored food. 5019 637 01004 Operation alarms In the event of operation alarms, other alarms will also be displayed in the refrigerator or freezer compartment, depending on the malfunction site, (e.g. CF, AL01, AL02, AL03 or AL04 etc...) call Aftersales Service and specify the alarm code. Refrigerator door open alarm The refrigerator door symbol lights up and the acoustic alarm sounds. The alarm is activated when: · the refrigerator's door is left open for more than 2 minutes. Press OK to mute the acoustic alarm. If the door is not closed, the acoustic alarm will sound again after two minutes. Close the door/s and press the OK button. Note: in these cases 6th Sense automatically appears on the display Malfunction and After-sales Service symbol (Call After-sales Service) Listeria indicator - average temperature of the whole compartment (depending on model) Right temperature inside the refrigerator When the symbol indicates the proper temperature in the refrigerator compartment. For optimum temperature adjustment, the refrigerator is provided with a temperature indicator to allow you control the average temperature. Checking the temperature After the appliance has been switched on for at least 24 hours, can be checked if the temperature in the refrigerator is correct and, if necessary, adjust the setting as indicated in the user instructions (see "Adjusting the temperature"). The internal temperature of the refrigerator depends on various factors such as the ambient temperature of the room, the amount of food stored and how often the door is opened. These factors should be taken into account when setting the appliance. If the symbol is switched OFF, it means that the temp. inside the refrigerator is too warm; in this case adjust the temp,. setting and wait for at least 12 hours before checking again if the temp, is correct. IMPORTANT: after opening the door or loading the refrigerator, it is normal if the symbol is switched OFF for some time, especially if room temperature is very warm. Function of replacing antibacterial filter necessity After displaying icon, antibacterial filter should be replaced for new one. Description of replacing (see IFU "Care and Maintenance"). Next press and hold the button "OK" for 5 seconds in order to switch off the icon. After 6 months of product usage, the icon will display again, informing about replacing filter necessity. It is possible to switch off icon for 6 hours by pressing ...