HIGH PERFORMANCE FURNITURE FOR YOUR HOME THEATER Deploy TM Assembly Instructions DeployTM Home Theater Furniture Your DeployTM Home Theater Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance DeployTM Home Theater Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Designed by BDI Design Studio. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. "Deploy" and BDI are trademarks of Becker Designed Inc. All Rights reserved. ©2005, BDI Assembled Frame x 1 Sliding Back Panel x 1 Center Shelf Support x 1 Top Glass Shelf x 1 Center Glass Shelf x 2 Rubber Bumper Insert x 15 Allen Wrench x 1 Shelf Pin x 4 Threaded Knob x 4 Velcro Strap/Wood Screws x 9 Step 1 Unpack and identify the parts listed above. The assembly workspace should be a non-marring surface such as carpet. If any parts are missing or damaged contact: BDI Customer Service at customerservice@bdiusa.com Unfold the metal legs on the assembled frame. Install the shelf pins into the desired location on the folding metal legs and the inside area of the wood frame using the allen wrench. Install the rubber bumper inserts to the assembled frame. Step 2 Insert back panel. Once the metal legs are opened, slide the back panel down into the "U" channel, and tighten the four threaded knobs to secure back panel into position. Note* threaded knobs are included with the assembled frame. Step 3 First, install the rubber bumper inserts to all of the hole locations on the center shelf support. Second, install the center glass shelf support by placing on the previously installed shelf pins. Third, install the glass shelves. Step 4 Velcro straps and small wood screws are supplied, and can be used for organizing cable management. On the rear side of the back panel, are 9 pre-drilled holes for installing the Velcro straps using a Phillips screw driver. Double Wide TV Stand Model 9624 Cherry 19" H x 49" W x 19.5" D For flat panel TVs up to 50", or rear projection TVs up to 45". Triple Wide TV Stand Model 9629 Cherry 19" H x 61" W x 19.5" D For flat panel TVs up to 62", or rear projection TVs up to 62". Double Wide TV Stand Model 9634 Espresso 19" H x 49" W x 18.5" D For flat panel TVs up to 50", or rear projection TVs up to 45". Triple Wide TV Stand Model 9639 Espresso 19" H x 61" W x 18.5" D For flat panel TVs up to 62", or rear projection TVs up to 62". ...